ROSE DISPLAYS QUICKGRIP WITH MULTICLIPS Manuel utilisateur

35 Congress Street, Salem, MA 01970

Tel# 1- 800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Instructions for Hanging

Instruction Sheet

Step 1

For use with poster paper or thinner

substrates. Score and fold or staple poster

edge and slide into the QuickGrip Holder.

When using staples, place staples 1/4” from

top and bottom edges of poster. Fig. 1

For use with thicker graphics up to 2mm.

Starting at one corner push the QuickGrip

Holder onto the graphic. Work your way

down the holder tapping it firmly down to

seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig. 3

Align the bottom rail of the MultiClip with

the top channel of the plastic holder. Slide

MultiClip into rail. Fig. 4 Repeat step 3

for second MultiClip.

Step 4

Push end caps into place. Fig. 5

Step 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip Holder,

End Caps and MultiClips for future projects.

End Caps

06-5525

MultiClips

1UP-0101

QuickGrip™

Incept-8.5.02

QuickGrip is a trademark of Rose Displays, Ltd. Neither the manufacturer

nor any sales agent may be held liable for injury, loss or damage resulting

from the use of these products. Part #02INSQuickGripMC

QuickGrip

12-0500

Figure 6Figure 5

Figure 3 Figure 4

Figure 2

Figure 1

35 Congress Street, Salem, MA 01970

Tel# 1- 800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Instructions for Hanging

Instruction Sheet

Step 1

For use with poster paper or thinner

substrates. Score and fold or staple poster

edge and slide into the QuickGrip Holder.

When using staples, place staples 1/4” from

top and bottom edges of poster. Fig. 1

For use with thicker graphics up to 2mm.

Starting at one corner push the QuickGrip

Holder onto the graphic. Work your way

down the holder tapping it firmly down to

seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig. 3

Align the bottom rail of the MultiClip with

the top channel of the plastic holder. Slide

MultiClip into rail. Fig. 4

Step 4

Push end caps into place. Fig. 5

Step 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip Holder,

End Caps and MultiClips for future projects.

End Caps

06-5525

MultiClip

1UP-0101

QuickGrip™

Incept-8.5.02

QuickGrip is a trademark of Rose Displays, Ltd. Neither the manufacturer

nor any sales agent may be held liable for injury, loss or damage resulting

from the use of these products. Part #02INSQuickGripMC

QuickGrip

12-0500

Figure 6Figure 5

Figure 3 Figure 4

Figure 2

Figure 1

Parts

Instructions for Hanging

Instruction Sheet

Step 1

For use with poster paper or thinner

substrates. Score and fold or staple poster

edge and slide into the QuickGrip Holder.

When using staples, place staples 1/4” from

top and bottom edges of poster. Fig. 1

For use with thicker graphics up to 2mm.

Starting at one corner push the QuickGrip

Holder onto the graphic. Work your way

down the holder tapping it firmly down to

seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig. 3

Align the bottom rail of the MultiClip with

the top channel of the plastic holder. Slide

MultiClip into rail. Fig. 4 Repeat step 3

for second MultiClip.

Step 4

Push end caps into place. Fig. 5

Step 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip Holder,

End Caps and MultiClips for future projects.

End Caps

06-5525

MultiClips

1UP-0101

QuickGrip™

Incept-8.5.02

QuickGrip is a trademark of Rose Displays, Ltd. Neither the manufacturer

nor any sales agent may be held liable for injury, loss or damage resulting

from the use of these products. Part #02INSQuickGripMC

QuickGrip

12-0500

Figure 6Figure 5

Figure 3 Figure 4

Figure 2

Figure 1

Parts

Instructions for Hanging

Instruction Sheet

Step 1

For use with poster paper or thinner

substrates. Score and fold or staple poster

edge and slide into the QuickGrip Holder.

When using staples, place staples 1/4” from

top and bottom edges of poster. Fig. 1

For use with thicker graphics up to 2mm.

Starting at one corner push the QuickGrip

Holder onto the graphic. Work your way

down the holder tapping it firmly down to

seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig. 3

Align the bottom rail of the MultiClip with

the top channel of the plastic holder. Slide

MultiClip into rail. Fig. 4

Step 4

Push end caps into place. Fig. 5

Step 5

Suspend poster. Fig. 6

Important note:

Please save and reuse the QuickGrip Holder,

End Caps and MultiClips for future projects.

End Caps

06-5525

MultiClip

1UP-0101

QuickGrip™

Incept-8.5.02

QuickGrip is a trademark of Rose Displays, Ltd. Neither the manufacturer

nor any sales agent may be held liable for injury, loss or damage resulting

from the use of these products. Part #02INSQuickGripMC

QuickGrip

12-0500

Figure 6Figure 5

Figure 3 Figure 4

Figure 2

Figure 1

Table des matières

Autres manuels ROSE DISPLAYS Accessoires

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH CABLE AND SAUCER Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH PEGS AND MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND NO LOAD WITH MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SNAIL ADHESIVE WITH CEILING SLUG Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK SQUARE WITH CABLE CLIP AND BALL... Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH CORD AND BARB Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SIDE-LOADING ANOSKYBOX Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ADVANCETRAK WITH METAL CLIP AND V CLIP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH MONOFILAMENT AND BARB Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE AND SAUCER Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS CABLE CLIP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH OLD ONEUP GOTCHA CLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS PANEL DIVIDER Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT SCREW BASE SIDE LOAD Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK WITH PEG AND MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH WINDOW MOUNTS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ULTRAFRAME Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH CABLE CLIP AND LOOP AND... Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH GOTCHA CLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS CABLE CLIP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOKIOSK WITH ANOFOOT Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH WALL HANGERS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOSCREEN WITH ANOFOOT Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur