ROSE DISPLAYS ANOQUICK ROUND WITH MULTICLIPS Manuel utilisateur

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Instruction Sheet

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClips for future projects.

MultiClips

1UP-0101

End Caps

06-5525

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

AnoQuick™

Instructions for Hanging

Incept-7.31.02

Figure 2

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickMC

Figure 3

Figure 5

Figure 4

Figure 1

Figure 6

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions for Hanging

OneUp

Instruction Sheet

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClip for future projects.

AnoQuick™

Incept-7.31.02

End Caps

06-5525

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickMC

MultiClip

1UP-0101

Figure 2

Figure 3

Figure 5

Figure 4

Figure 1

Figure 6

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions for Hanging

Instruction Sheet

AnoQuickTM

Incept-7.31.02

End Caps

06-5525

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickMC

MultiClips

1UP-0101

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClips for future projects.

Figure 2

Figure 3

Figure 5

Figure 4

Figure 1

Figure 6

Incept-7.31.02

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions for Hanging

OneUp

Instruction Sheet

AnoQuick™

Incept-7.31.02

End Caps

06-5525

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickMC

MultiClip

1UP-0101

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClip for future projects.

Figure 2

Figure 3

Figure 5

Figure 4

Figure 1

Figure 6

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ROSE DISPLAYS Accessoires

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH CABLE CLIP AND CABLE AND... Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA PLUS WITH MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT WEIGHTED BASE SQ Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH ANOCONNECTORS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND ASSEMBLED-SLATWALL Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA FRAME ROUND Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT MAGNET BASE SQ Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH LOOP TO LOOP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK SQUARE WITH MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE AND BALL Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH WINDOW MOUNTS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH WINDOW MOUNTS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SPIDER CEILING TRACK QUICK PAGE Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH CABLE AND BALL Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH CABLE CLIP AND BALL CHAIN Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH MULTICLIP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK WITH PEG Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS CABLE CLIP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH ADHESIVE Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA SQUARE WITH MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA PLUS WITH MULTICLIPS AND REGULAR... Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA SQUARE WITH WALL HANGERS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH 4 WALL MOUNTS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT CEILING ANCHORS Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur