ROSE DISPLAYS GOTCHA WITH WINDOW MOUNTS Manuel utilisateur

The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSGotchaWindowMounts

Incep 9/16/02

Parts

35 Congress Street, Salem MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Instructions for Hanging

Figure 1

Gotcha

Instruction Sheet

Window Mounts

20-0038

Step 1

Place poster on a flat surface. Snap the Gotcha

(top and bottom) open so hinge is turned up as

far as possible. Insert graphic completely into

holder until edge of graphic meets top of holder.

To close, snap the Gotcha shut. Fig. 1

Note: It is easier to open and close the Gotcha

by starting at one end and working your way

down the holder. With large or curling graphics,

it may be easier to insert graphic at one end and

slide into holder from one end to another.

Step 2

Attach the Window Mounts to the Gotcha. You

should hear a “Snap” when the clip is properly

seated. Fig. 2

Note: For best results, place the suction cup clips

1/3 of the way in from each end on the top

holder.

Step 3

Prepare the window and suction cups by making

sure they are clean and free of dust and dirt.

Press the suction cups firmly to the window.

Gotcha

12G100

Figure 2

Important Note:

For best performance when first applied

and occasionally thereafter, press the

middle of the cup (on the cap) to “burp”

Parts

The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSGotchaWindowMounts

Incep 9/16/02

Instructions for Hanging

Figure 1

Gotcha

Instruction Sheet

Window Mounts

20-0038

Gotcha

12G100

Figure 2

Important Note:

For best performance when first applied

and occasionally thereafter, press the

middle of the cup (on the cap) to “burp”

Step 1

Place poster on a flat surface. Snap the Gotcha

(top and bottom) open so hinge is turned up as

far as possible. Insert graphic completely into

holder until edge of graphic meets top of holder.

To close, snap the Gotcha shut. Fig. 1

Note: It is easier to open and close the Gotcha

by starting at one end and working your way

down the holder. With large or curling graphics,

it may be easier to insert graphic at one end and

slide into holder from one end to another.

Step 2

Attach the Window Mounts to the Gotcha. You

should hear a “Snap” when the clip is properly

seated. Fig. 2

Note: For best results, place the Window Mounts

1/3 of the way in from each end on the top

holder.

Step 3

Prepare the window and suction cups by making

sure they are clean and free of dust and dirt.

Press the suction cups firmly to the window.

Table des matières

Autres manuels ROSE DISPLAYS Accessoires

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH SLATWALL HANGERS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT SCREW BASE SIDE LOAD Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH MULTICLIP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH OLD ONEUP GOTCHA CLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH LOOP TO LOOP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH CABLE CLIP AND LOOP AND... Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT MAGNET BASE SQ Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND ASSEMBLED-MOLLY ANCHORS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH LOOP AND BALL Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH WALL HANGERS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND NO LOAD WITH MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SPIDER CEILING TRACK WITH SCREWS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH CABLE CLIP AND BALL... Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH CABLE AND SAUCER Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ADVANCETRAK WITH CABLE CLIP AND CABLE Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH FISH CLIP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI ROUND WITH MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH PEGS AND MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS PIG TAIL Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH V CLIP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT SCREW BASE SQ Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ADVANCETRAK WITH METAL CLIP AND V CLIP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH WINDOW MOUNTS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE AND CRIMP SLEEVES Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur