ROSE DISPLAYS CABLE CLIP Manuel utilisateur

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

SuperSnap™ with Rod Connector

Step 1

Place cable into inner channel of

CableClip. The cable should

snap into place. Fig. 1

Align one end of the CableClip with

the top channel of the plastic holder.

Then insert one round end, press

down on the other round end and

slide CableClip into rail. Fig. 2

Note: Position CableClip about

halfway down each SuperSnap. Fig. 3

Step 2

Push rod halfway into clip rail

of one SuperSnap. Fig. 4

Step 3

Insert rod into top clip rail of second

SuperSnap until both holders meet.

Fig. 5 & 6 Repeat steps 2-3 for

additional SuperSnaps.

Instruction Sheet

Instructions for assembly

Incept-11.13.02

The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSSuperSnapRodCCLoop

Figure 3

Figure 6

Figure 2Figure 1

Figure 5

Figure 4

Page 1 of 2

SuperSnap

12S300

Cable Clip

06-5050

Loop & Saucer

16-0018SL

End Caps

06-5475

6” Rod

97-0304-06

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

(continued)

Step 4

Snap all sections of the SuperSnap

open. Fig. 7

Note: It is easier to open and close

the SuperSnap by starting at one

end and working your way down

the holder.

Step 5

Insert poster (top and bottom) into

all sections of SuperSnap. Fig. 8

Step 6

To close, snap the SuperSnap shut.

Fig. 9

Step 7

Push end caps into place. Fig. 10

Step 8

Suspend holders. Finished Look

Important note:

Please save and reuse the

SuperSnap, End Caps and

CableClips for future projects.

Instructions for assembly

Incept-11.13.02

The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSSuperSnapRodCCLoop

SuperSnap™ with Rod Connector Instruction Sheet

Open all

holders

Finished Look

Page 2 of 2

Figure 10Figure 9

Figure 7 Figure 8

SuperSnap

12S300

Cable Clip

06-5050

Loop & Saucer

16-0018SL

End Caps

06-5475

6” Rod

97-0304-06

Parts

SuperSnap™ with Rod Connector

Step 1

Place cable into inner channel of

CableClip. The cable should

snap into place. Fig. 1

Align one end of the CableClip with

the top channel of the plastic holder.

Then insert one round end, press

down on the other round end and

slide CableClip into rail. Fig. 2

Note: Position CableClip about

halfway down each SuperSnap. Fig. 3

Step 2

Push rod halfway into clip rail

of one SuperSnap. Fig. 4

Step 3

Insert rod into top clip rail of second

SuperSnap until both holders meet.

Fig. 5 & 6 Repeat steps 2-3 for

additional SuperSnaps.

Instruction Sheet

Instructions for assembly

Incept-11.13.02

The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSSuperSnapRodCCLoop

Figure 3

Figure 6

Figure 2Figure 1

Figure 5

Figure 4

Page 1 of 2

SuperSnap

12S300

Cable Clip

06-5050

Loop & Saucer

16-0018SL

End Caps

06-5475

6” Rod

97-0304-06

Parts

(continued)

Step 4

Snap all sections of the SuperSnap

open. Fig. 7

Note: It is easier to open and close

the SuperSnap by starting at one

end and working your way down

the holder.

Step 5

Insert poster (top and bottom) into

all sections of SuperSnap. Fig. 8

Step 6

To close, snap the SuperSnap shut.

Fig. 9

Step 7

Push end caps into place. Fig. 10

Step 8

Suspend holders. Finished Look

Important note:

Please save and reuse the

SuperSnap, End Caps and

CableClips for future projects.

Instructions for assembly

Incept-11.13.02

The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the

manufacturer nor any sales agent may be held liable for injury, loss or

damage resulting from the use of these products.

Part #02INSSuperSnapRodCCLoop

SuperSnap™ with Rod Connector Instruction Sheet

Open all

holders

Finished Look

Page 2 of 2

Figure 10Figure 9

Figure 7 Figure 8

SuperSnap

12S300

Cable Clip

06-5050

Loop & Saucer

16-0018SL

End Caps

06-5475

6” Rod

97-0304-06

Autres manuels pour CABLE CLIP

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ROSE DISPLAYS Accessoires

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH CABLE AND SAUCER Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ECONOSTAND WITH ANOQUICK Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT CLAMP BASE SQ Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT WEIGHTED BASE SQ Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH ONEUP GOTCHA CLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ADVANCETRAK WITH CABLE CLIP AND CABLE Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SPIDER CEILING TRACK QUICK PAGE Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT SCREW BASE SQ Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI SQUARE WITH MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOSCREEN WITH BASE RAIL Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT SCREW BASE Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOGRIP WITH MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SNAIL ADHESIVE DISK Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS BUTTERFLY CLIPS WITH NON-LOCKING HOOKS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH PEGS AND MULTICLIPS Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH CABLE CLIP AND LOOP AND... Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT WEIGHTED BASE Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS RAN-BAS-CC WITH CORD AND BARB Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH CABLE CLIP AND BALL... Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS FISH CLIP Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI SQUARE WITH CABLE CLIP AND BALL... Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT MAGNET BASE SQ Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND WITH BALL CHAIN Manuel utilisateur

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH WALL HANGERS Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur