Roadragon MT-009 4G Manuel utilisateur

MT-009 4G User manual

User Manuel

MT-009 4G

MT-009 4G User manual

content

1.feature of product.................................................................................................................................................1

2.technical parameter.............................................................................................................................................. 2

2.1 Machine parameters..........................................................................................................................................2

Product features...............................................................................................................................................................3

3.1 Positioning monitoring function.......................................................................................................................3

3.1.1 Regular monitoring.............................................................................................................................3

3.1.2 Blind spot compensation.................................................................................................................... 3

3.1.3 corner compensation...........................................................................................................................3

3.1.4 Base station positioning......................................................................................................................3

3.1.5 A-GPS................................................................................................................................................. 3

3.2 Alarm function.................................................................................................................................................. 4

3.2.1 Low pressure alarm.............................................................................................................................4

3.2.2 Overspeed alarm, low speed alarm.....................................................................................................4

3.2.3 Vibration alarm................................................................................................................................... 4

3.2.4 Displacement alarm............................................................................................................................... 4

3.2.5 Positioning module abnormal alarm...................................................................................................4

3.2.6 Main power failure alarm................................................................................................................... 4

3.2.7 Disassembly alarm..............................................................................................................................4

3.3 Smart function...................................................................................................................................................5

3.3.1 Smart sleep..........................................................................................................................................5

3.3.2 Intelligent self-test.............................................................................................................................. 5

3.3.3 Tamper detection.................................................................................................................................5

3.3.4 Static drift suppression....................................................................................................................... 5

3.3.5 Mileage Statistics................................................................................................................................5

3.3.6 Remote settings...................................................................................................................................5

3.3.7 Remote upgrade.................................................................................................................................. 6

3.3.8 Dual IP or dual domain name............................................................................................................. 6

3.3.9 Ministry standard agreement version................................................................................................. 6

4.Installation Notes................................................................................................................................................. 7

4.1 Get to know the product................................................................................................................................ 7

4.2 Installation and debugging.............................................................................................................................8

4.2.1 SIM card installation..............................................................................................................................8

4.2.2 Power on the host...................................................................................................................................8

4.3 parameter settings............................................................................................................................................. 8

4.4 More SMS instructions..................................................................................................................................... 9

1.feature of product

Support GPS/Beidou, AGPS, base station and other positioning functions, accurate

positioning;

The device supports 4G and 2G networks in most regions of the world, which can meet

the needs of almost all regions of the world and cross-regional use. 4G network supports

TDD LTE/FDD LTE, 2G network supports GSM/GPRS.

The host has a built-in high-sensitivity G-sensor acceleration sensor.

The host has a built-in photosensitive sensor.

Equipped with basic functions such as intelligent self-check, intelligent sleep, remote oil

and power off, remote wireless upgrade intelligent function and alarm function.

DC 9~100V ultra-wide voltage input range, suitable for positioning monitoring of

automobiles, electric motorcycles and other vehicles.

Products with similar performance specifications, the smallest volume, easy to conceal

installation.

2.technical parameter

2.1 Machine parameters

Product Features

specific description

Operating Voltage

DC 9V~100V

Working current

Average current <40mA (DC12V),

maximum current <120mA (DC12V)

Built-in battery

90mAH,3.6V，Lithium polymer battery

battery protection

Anti-200V power supply reverse connection;

main power voltage detection;

Terminal volume

70mm*40mm*13mm(L*W*H)

Terminal weight

47±5g

Operating temperature

-20℃～70℃

storage temperature

-40℃～85℃

Relative humidity

5%～95%

Communication module

TDD LTE:B38/B39/B40/B41

FDD LTE:B1/B3/B5/B8

GSM:900/1800MHz

GNSS module

GPS L1:1575.42MHz

BD B1: 1561.098MHz

Product features

3.1 Positioning monitoring function

3.1.1 Regular monitoring

The vehicle satellite terminal can set a certain moment or a certain time period or at a certain time interval, and

send the vehicle's position and status information to the monitoring center.

3.1.2 Blind spot compensation

When the terminal enters the GPRS/LTE blind area, the trajectory data will be saved at the

shortest time interval of 30S, and the blind area data will be uploaded to the platform when the

communication module is online again. Up to 4000 pieces of blind spot compensation data can be

saved.

3.1.3 corner compensation

When the vehicle enters the curve, the terminal detects that there is a certain angular deviation

in the driving direction (default 20 degrees), and will add a regular return message to ensure that the

driving trajectory is more accurate.

3.1.4 Base station positioning

The terminal uses satellite positioning by default. When it enters the satellite signal blind area

and cannot be accurately positioned, the terminal automatically switches to base station positioning.

The terminal obtains base station information every 30S, uploads the base station information, and

the specific location is analyzed by the server.

3.1.5 A-GPS

The terminal has the A-GPS function. When the terminal is connected to GPRS, the AGPS

function can be used to speed up the positioning speed of the satellite positioning module and

improve the positioning accuracy.。

3.2 Alarm function

3.2.1 Low pressure alarm

When the battery voltage on the vehicle is too low (0-11V or 19-22V), the vehicle terminal will report a low

voltage alarm to the monitoring center.

3.2.2 Overspeed alarm, low speed alarm

When the vehicle speed is higher than the overspeed alarm value, the vehicle terminal will notify the monitoring

center. Similarly, when the vehicle speed is lower than the low-speed alarm value, a low-speed alarm will be

reported to the monitoring center. The alarm value can be set.

3.2.3 Vibration alarm

The device turns on the vibration alarm function. After the device is turned off for more than 10 minutes (the

fortification range: 1~20 minutes), the device vibrates and within 3 minutes (the delay range can be set: 1~10

minutes), the device will report the vibration alarm information.

3.2.4 Displacement alarm

When the device setting displacement exceeds 100 meters, an alarm (SMS prompt) will be generated, and the alarm

information will be reported when the displacement radius exceeds 100 meters when the device is turned off. (Note:

the displacement range is 100~2000m).

3.2.5 Positioning module abnormal alarm

When the host detects that the GPS/BD satellite module is working abnormally, it will report the satellite receiver

fault alarm to the monitoring center.

3.2.6 Main power failure alarm

When the main battery of the vehicle is damaged or cannot supply power, the built-in backup power supply can

keep the system working and send a power failure alarm to the monitoring center.

3.2.7 Disassembly alarm

The device has a built-in photosensitive sensor, which can detect changes in the ambient light of the device. When

abnormal exposure is detected, the device will automatically generate disassembly alarm information and report it

to the monitoring center in real time.

3.3 Smart function

3.3.1 Smart sleep

The host has a built-in high-sensitivity G-sensor acceleration sensor, which can monitor whether the vehicle is

moving in real time. When no motion is detected for a long time, the host automatically enters a power-saving state,

closes the GPS/BD module, and at the same time GSM enters the heartbeat return state. In this state, the power

consumption of the device is extremely low, which can greatly reduce the impact on the vehicle battery loss.

3.3.2 Intelligent self-test

The vehicle-mounted terminal can perform self-diagnosis. Once a fault occurs, it will send a fault notification to the

center, such as satellite positioning module, GSM module, etc., and can automatically take relevant measures. The

monitoring center can also query the current model, version, configuration, running status, and device function of

the terminal.

3.3.3 Tamper detection

The vehicle terminal can automatically identify the disassembly state through the light sensor

and power detection module. And report the disassembly data to the platform in real time.

3.3.4 Static drift suppression

The host has a built-in high-sensitivity G-sensor acceleration sensor and a complete set of

positioning data filtering algorithms, which can filter out most of the static drift data and ensure the

accuracy of satellite positioning data.

3.3.5 Mileage Statistics

The vehicle mileage data is sent back to the monitoring center together with the vehicle

positioning data; the initial mileage can be set when the vehicle is installed。

3.3.6 Remote settings

Remotely set various parameters of the terminal through the central system, including IP, center

number, various monitoring parameters, etc.

3.3.7 Remote upgrade

As long as the GPRS status is available, the terminal software can be upgraded by remote

wireless mode.

3.3.8 Dual IP or dual domain name

The terminal supports dual IP connection between the main server and the standby server, and the default

connection is to the main server. If there is a problem with the main server, it will automatically switch to the

standby server. The primary server and backup server can be set in two ways: IP or domain name.

3.3.9 Ministry standard agreement version

The terminal can choose the JTT808 partial standard protocol when it leaves the factory, which

is suitable for all platforms that support the partial standard protocol.

4.Installation Notes

4.1 Get to know the product

red LED light

Fast flash: GPRS connected

Slow flash: GPRS connected

Steady on: The module is

abnormal

Green LED light

Flashing quickly: Searching for positioning signals

Steady on: precise positioning

Slow flash: base station positioning

Off: Unlocated

Backup battery

switch

SIM card holder

satellite positioning antenna

Red: connect to the positive pole

of the power supply

Black: connect to the negative

pole of the power supply

Orange: ignition switch, ACC

Yellow: car lock output line

4.2 Installation and debugging

4.2.1 SIM card installation

Open the top cover of the terminal, insert the prepared SIM card into the card holder, and then

confirm that the card buckle is in place. Please ensure that the SIM card has been activated with

GPRS/LTE function in advance, and know the SIM card number。

Pull the cover up

to turn on。

4.2.2 Power on the host

After installing the SIM card, turn the battery switch to the ON position, and the red light starts

to flash, indicating that the host is powered on and working。

4.3 parameter settings

Note: The terminal has a built-in ID number, and the customer's IP port can be preset at the factory.

Generally, no parameter setting is required; if you need to modify the IP, set it according to the

following instructions. The following two methods require the SIM card to start the SMS function。

For example, The client's server IP is：119.23.233.52 ，The port number：6000 ，Then use SMS to

write:IP,119.23.233.52,6000,T# 。The terminal will reply:IP:119.23.233.52:6000,T Then the setting is

successful (T refers to TCP, U refers to UDP).

For example, The client's server domain name is :www.365qczx.com ，port is ：6000 ，write using

SMS:IP,www.365qczx.com,6000,T# 。terminal reply:IP:www.365qczx.com:6000,T Then the setting is

successful (T refers to TCP, U refers to UDP)。

Use caution：

It is strictly forbidden to use the equipment not in accordance with the operating instructions,

Autres manuels pour MT-009 4G

Table des matières

Autres manuels Roadragon GPS

Roadragon

Roadragon LTS-100D Guide de configuration

Roadragon

Roadragon LTS-60TH Guide de configuration

Roadragon

Roadragon LTS-50DS Guide de configuration

Roadragon

Roadragon LLS-100TS Guide de configuration

Roadragon

Roadragon LTS-100DST Manuel utilisateur

Roadragon

Roadragon GLL-150 Manuel utilisateur

Roadragon

Roadragon G-M100 Manuel utilisateur

Roadragon

Roadragon LTS-100DS Manuel utilisateur

Roadragon

Roadragon BK-800 Manuel utilisateur

Roadragon

Roadragon TK-6WT Manuel utilisateur

Roadragon

Roadragon G-V303 Manuel utilisateur

Roadragon

Roadragon MT-009 4G Manuel utilisateur

Roadragon

Roadragon G-MT008G Manuel utilisateur

Roadragon

Roadragon G-V803 Manuel utilisateur

Roadragon

Roadragon LTS-3YT Manuel utilisateur

Roadragon

Roadragon LLS-300T Guide de configuration

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur