G-MT008G User manual
9
Upmove123456 120 reply to Set OK upload interval settings (default 120 seconds)
3.3.7. The interval setting of entering dormancy
Auto123456 reply Set OK automatic working mode (default) device without any alarm, no operation af
ter 5 minutes, the device enters the dormancy state: GPS, GPRS. Telephone or SMS or shock will wa
ke up equipment immediately.
The time interval from the working state to the dormancy state of the terminal is 5 minutes.
Instruction format: sleep,123456,10 reply OK, open sleep 10: for 10 minutes 0: means no sleep.
3.3.8.Setting up time setting for fortification
When the vehicle power is closed, the terminal ACC line is low. If the power supply is not opened w
ithin 3 minutes, the terminal will enter the fortification state. If the vehicle is set up, the vehicle will
vibrate continuously for 5 seconds and will trigger the vibration anti-theft alarm mechanism. In the nex
t 3 minutes, the power supply of the vehicle is still unopened (ACC state still is still not low). The e
nd will immediately start the shock burglar alarm.
The setting time of the guard can send SMS messages to the terminal at the time of setting up the gu
ard, and set up the new fortification time. The default automatic guard time is 3 minutes.
Fortification instruction format:
ACCLT,123456,3 reply OK (3 indicates automatic fortification after 3 minutes) SMS set up automatic f
ortification time.
3.3.9. language and time zone settings
Terminal provides Chinese and English two language display, different regions of time according to the
time zone settings.
Instruction format: 109# reply OK handover in English
Zone123456 E08 reply OK modified time zone E08: East eight district.
3.3.10. The IP address and port number of the server platform
The IP address and port number are provided by the platform operators. When purchasing this product,
OK is generally set. If the user needs to set up his own, he can consult the platform operator.
Instruction format:
IP 123.1.150.82 2332 reply to set IP OK
SMS instruction: IP+ space +IP address + space + port number
3.3.11. Restart the terminal
When the terminal works GPRS link exception, such as: the terminal parameter is set correctly, but th
e terminal is not online, you can send SMS instructions to the terminal. In order to enable the termina
l to perform remote restart, the terminal can resume normal operation.
Instruction format: CQ reply to system reset OK! Device restart
3.3.12. Restore the factory setting
When the terminal setup parameters are not properly set, you can send short message instructions to re
store terminal parameters to the default setting value of the terminal, try to restore the terminal to nor
mal work.
Restore the factory setting instruction: FORMAT
When the terminal receives the instruction, it will restore the setting parameters of the terminal to the
default value.
3.4. terminal operation
3.4.1 start / turn off
Boot: insert the valid SlM card at the terminal, then connect all the wiring. Turn on the terminal pow
er switch (back to the SIM card holder to turn on the terminal power), and the power indicator lights
up. After starting up, GSM began to search the GSM network signal. At that time, the GSM indicator
light was dark for two seconds, and the green light was in normal communication. The GPS indicator
lights up for 2 seconds. It starts searching for the GPS satellite signal. The GPS indicator light is bri
ght, indicating that the GPS has been positioned.
