Roadragon LTS-3YT Manuel utilisateur
LTS-3YT User manual
User Manuel
LTS-3YT
LTS-3YT User manual
Content
Chapter One: Product Photo............................................................................................................................. 3
Chapter two: Product feature............................................................................................................................4
Chapter three: Technical Parameters................................................................................................................ 5
3.1 【Parameter】................................................................................................................................ 5
3.2【4G frequencies in different countries】..........................................................................................5
Chapter 4: Function.......................................................................................................................................... 6
4.1 【Basic function】......................................................................................................................... 6
4.1.1 Position......................................................................................................................6
4.1.2 AGPS......................................................................................................................6
4.1.3 LBS........................................................................................................................... 6
4.1.4 Battery Level Detect..................................................................................................7
4.1.5 Intelligent Tracking................................................................................................... 7
4.1.6 Clock mode............................................................................................................... 7
4.1.7 Backend Specific Commands................................................................................... 7
4.1.8 Blind zone compensation.......................................................................................... 7
4.1.9 E-Sim.........................................................................................................................8
4.2【Extention/Optional Functions】..................................................................................................... 8
4.2.1 Light Sensor.............................................................................................................. 8
4.2.2 Motion Detect............................................................................................................8
4.2.3 Temperature and humidity detect..............................................................................8
Chapter Five: Installation Guide.......................................................................................................................9
5.1 【Installation diagram】................................................................................................................ 9
5.2 【Installation and debugging】....................................................................................................10
5.2.1 SIM card installation............................................................................................... 10
5.2.2Main Unit power on................................................................................................. 10
5.2.3 Parameter setting..................................................................................................... 10
5.3 【Key parameter setting】........................................................................................................... 10
5.3.1 Fixed mode..............................................................................................................10
5.3.2 Track mode..............................................................................................................11
5.3.3 Position mode..........................................................................................................11
5.3.4 Clock mode............................................................................................................. 11
5.3.5 Motion and static mode...........................................................................................12
5.4【Common SMS command list】....................................................................................................12
LTS-3YT User manual
1
Chapter One: Product Photo
Chapter two: Product feature
1. This product is designed for the applications on container management, it can
replace the air vent of the container, which will not affect the integrity of the
container, meanwhile for a concealable installation.
2. The standby time is long. If the data upload interval is one packet every 24 or 48
hours and the working time is about 5-10 years, the battery can support different
battery capacity to meet different needs of customers.
3. Low Voltage: The working voltage can be decreased to 10μA during sleep mode,
to make sure the unit would work longer.
4. The device supports 4G, 3G, 2g networks in most parts of the world, which can
almost meet the needs of all regions of the world and cross-regional use. 4G
network supports tdd lte/fdd lte,3g network, supports wcdma,2g network,
supports gsm/gprs
5. Wireless, easy to install, the product has double waterproof function design, it is
completely applicable to the outdoors usage, anti-water, salt, sun, aging and other
tough environment
6. Support E-Sim with better stability and vibration proof.
Chapter three: Technical Parameters
3.1 【Parameter】
Characteristic
s
Description
Working
Voltage
Built in Unchangeable Lithium battery
（3.6V，5400～10800mAh）
Optional 5400/8100/10800mAh
Power
Consuming
Average working current<100mA;Sleep
current<20uA;
Communication
4G network: TDD LTE/ FDD LTE
3G network: WCDMA
2G network: GSM/ GPRS
GNSS
Support GPS、BD Dual mode
GPS L1:1575.42MHz,C/A Code
BD B1: 1561.098MHz
Dimension
205mm*68mm*27mm（L*W*H）
Weight
200g±5g
Waterproof
IP67
Double waterproof function
Working
Temperature
-20℃～70℃
Relative
humidity
5%～95%
3.2【4G frequencies in different countries】
Regions
Frequencies
China/India
TDD LTE:B38/B39/B40/B41
FDD LTE:B1/B3/B5/B8
WCDMA:B1/B8
GSM:900/1800MHz
Europe/Middle
TDD LTE:B38/B40/B41
East/Africa
FDD LTE:B1/B3/B5/B7/B8/B20
WCDMA:B1/B5/B8
GSM:B3/B8
North America
FDD LTE:B2/B4/B5/B12/B13/B14
WCDMA:B2/B4/B5
Australia/Taiwa
n/Brazil
FDD LTE:B1/B3/B4/B5/B7/B8/B28
WCDMA:B1/B2/B5/B8
GSM:B2/B3/B5/B8
Chapter 4: Function
4.1 【Basic function】
4.1.1 Position
The default setting is the terminal would send one packet each 24 hours, the packet information
includes: Position status, longitude and latitude, GSM Signal Strength, GPS numbers, battery voltage
etc, the upload interval can be configured, the unit is able to work no less than 365 days.
4.1.2 AGPS
The terminal is with APGS function, when the terminal connects GPRS; AGPS is used for speeding up
the position speed and improve the position accuracy
4.1.3 LBS
The default position mode is by GPS, when GPS enters into the blind zone and can not position
accurately, the terminal will switch to LBS, LBS provides the reference location which is not very
accurate
4.1.4 Battery Level Detect
The terminal will upload the battery level status together with the location data pack, and display the
battery level on the backend so the user could well know the balance battery , and meanwhile display
the current transmission time and the balance battery level of the next uploading pack, so the user
could have clear view on the terminal status
4.1.5 Intelligent Tracking
In case of found the door of the container is stolen or in other emergency cases and the real time
location of the container needs to be tracker, a SMS can be sent or send a command from the backend,
when the terminal starts work next time, it will receive this command and enter into track mode, and
upload the location data according to the preconfigured interval by customer until a stop tracking
command is received
4.1.6 Clock mode
The terminal could verify the timely wake up time points, maximum 4 points can be set for position
that is more accurate and connection to the server, this function could use SMS command or backend
command to set
4.1.7 Backend Specific Commands
Since the working time of the terminal is short, it is rare to receive the SMS, to ensure the command
sending efficiently, the backend uses a specific commands for MT06CW which can preset the
command, when the terminal is online, the backend will automatic send this command, to make sure
the commands is properly received.
4.1.8 Blind zone compensation
When the terminal enter into blind zone when in sleep mode, it will store the trace data according to
the preconfigured time interval and it will upload the data in the blind zone to the backend,
4.1.9 E-Sim
This terminal support E-Sim which could improve the product stability and to prevent the card slot is
loosen or the SIM is removed.
4.2【Extention/Optional Functions】
4.2.1 Light Sensor
Built in high sensitive light sensor module, it could detect the light changes from dark to light and
wake up the terminal to send alarm, this function is for detecting the door open alarm purpose.
4.2.2 Motion Detect
Built in high sensitive, low consumption G-sensor to detect whether the equipment is in motion or
static status and providing the real time moving data.
4.2.3 Temperature and humidity detect
The temperature and humidity detection interface is reserved inside the device, and the digital
temperature and humidity sensor can be connected to detect the temperature and humidity in the
container in real time.
Chapter Five: Installation Guide
5.1 【Installation diagram】
Battery
Switch
SIM card slot
Red LED：
Fast blink：GPRS connecting
Slow Blink：GPRS Connected
Solid on：Module error
Light sensor
E-SIM
Green LED：
Solid on-Position
Blink：LBS
Off：Unpositioned
5.2 【Installation and debugging】
5.2.1 SIM card installation
Open the top cover of the terminal, insert the prepared SIM card into the SIM cardholder, and then
confirm that the SIM card button is well placed. Please make sure that the SIM card has the GPRS
function available in advance and write down the SIM card number.
If the terminal is with built in E-SIM, no need to insert SIM card
5.2.2Main Unit power on
After installing the SIM card, turn the battery switch to the ON position. When the red light starts to
flash, indicating that the terminal is powered on.
5.2.3 Parameter setting
TCP/UDP connection mode setting
For example, the client's server IP is: 119.145.40.64, port number: 8881. If it is connected by TCP, use
SMS to edit: *88*1119145040064*8881*1#; if it is UDP connection, edit:
*88*1119145040064*8881*0#. The terminal will reply: set ok, the setting is successful.
5.3 【Key parameter setting】
5.3.1 Fixed mode
Command format：HX,T#
Command description：T:wake up time，unit：minutes，default T：1440，value range :10-43200f
minutes；for example，HX,1440#,set the wake up time is 1440 minutes (24 hours)。
Remark: Normally we use the default setting 1440, if set shorter wakeup time, the working time of the
terminal will be reduced.
Table des matières
Autres manuels Roadragon GPS
Roadragon
Roadragon MT-009 4G Manuel utilisateur
Roadragon
Roadragon MT-009 4G Manuel utilisateur
Roadragon
Roadragon G-V303 Manuel utilisateur
Roadragon
Roadragon LTS-100DST Manuel utilisateur
Roadragon
Roadragon G-MT008G Manuel utilisateur
Roadragon
Roadragon LTS-60TH Guide de configuration
Roadragon
Roadragon LTS-50DS Guide de configuration
Roadragon
Roadragon G-M100 Manuel utilisateur
Roadragon
Roadragon LLS-100TS Guide de configuration
Roadragon
Roadragon G-V803 Manuel utilisateur
