
GLL-150 User manual
5
Class 4 (2W @ 850/ 900 MHz)
Class 1(1W @ 1800/1900MHz)
Cache 2000 (point) location information
2.4 Function
1 ,built-in GPS module or Beidou module,
2, support 2G or 3G (WCDMA) network
3, the use of RFID electronic tag, support RFID card unlock function
4, the use of high strength plastic mold, lock body is not easy to destroy, passive failure will provide an
alarm signal, can be anti fall, shock, waterproof, dust-proof.
5, high capacity battery, up to 15000MHA, can be connected to work for up to 7 days
6, built-in strong magnetic, can make the lock firmly adsorbed on the car body
7, with low power alarm function, when the electricity is less than a certain value, the indicator light will
start
8, with buzzer prompt function, when the lock is not normally locked, the terminal will automatically issue
beep alarm to remind the driver
9, terminal with alarm reminders, when sewing is illegally cut off when the terminal will take the initiative
to send alarm
10, GPRS communication mode terminal, after each connection, automatically enter the GPS positioning
mode, using TCP/IP and UDP protocol,
11, remote configuration of the relevant logistics lock information.
12, location information, switch status, electronic lock, instant information, etc..
13, monitoring center remote authority unlock, IC card unlock mode, handheld unlock mode, SMS unlock
mode, etc.
14, monitoring center according to the pre-set location, range, vehicle overtime, route to regulate the
logistics of walking routes, such as violations, real-time reporting, monitoring and so on.