RIOTEC LS6322A Manuel utilisateur

1

Programming Quick Guide

LS6322A./ FS5022A

Installation

Make sure that the scanner has the correct cable to plug in the PC as

below described:

*Note : Please install PL-2303 driver for USB serial

Auto-sensing setup

The auto-sensing features works

when putting scanner on stand.

When scanner removes from stand,

scanner will become trigger mode.

Reset Configuration to Defaults

(For RS232, USB serial)

If you are unsure of the scanner configuration or have scanned the

incorrect codes, please scan the “Set Factory default” barcode. This

will reset the scanner to its factory defaults.

Default

READING MODE

Scan

(Level) Scan

(Pulse)

* Scan (Level) - A trigger pull activates the laser and decode

processing. The laser remains on and decode processing continues

until a trigger release, a valid decode, or the Laser On Time-out is

reached.

* Scan (Pulse) - A trigger pull activates the laser and decode

processing. The laser remains on and decode processing continues

until a valid decode or the Laser On Time-out is reached.

Redundancy Level

This scanner offers two levels of decode redundancy. Select higher

redundancy levels for decreasing levels of bar code quality. As

redundancy levels increase, the decoder’s aggressiveness decreases.

Select the redundancy level appropriate for the bar code quality.

Redundancy Level 1

barcode must be successfully read twice

before being decoded

Redundancy Level 2

barcode must be successfully read three times

before being decoded:

1D Symbologies On/OFF -1

ENABLE Code 128 DISABLE

ENABLE ISBT 128 DISABLE

ENABLE Code 39 DISABLE

ENABLE Code 39

FULL ASCII DISABLE

ENABLE

rioptic

Code 39 DISABLE

ENABLE UPC-A DISABLE

ENABLE UPC-E DISABLE

ENABLE EAN-8 DISABLE

ENABLE EAN-13 DISABLE

ENABLE CODABAR DISABLE

2

1D Symbologies On/OFF-2

ENABLE Interleaved 25 DISABLE

ENABLE Discrete 25 DISABLE

ENABLE MSI DISABLE

ENABLE Chinese 25 DISABLE

ENABLE Matrix 25 DISABLE

ENABLE GS1 DataBar DISABLE

ENABLE GS1 DataBar

Limited DISABLE

ENABLE GS1 DataBar

Expanded DISABLE

1D Symbologies On/OFF -3

ENABLE Composite

CC-C DISABLE

ENABLE Composite

CC-A/B DISABLE

ENABLE Composite

TLC 39 DISABLE

ENABLE Code 32 DISABLE

ENABLE CODE 93 DISABLE

ENABLE CODE 11 DISABLE

ENABLE Interleaved 25 DISABLE

ENABLE Discrete 25 DISABLE

 Information in this document is subject to change without notice.

 For more information, please visit:

www.riotec.com.tw R_140708_01

Ce manuel convient aux modèles suivants

Autres manuels RIOTEC Lecteur de codes-barres

RIOTEC

RIOTEC iDC9272N Manuel utilisateur

RIOTEC

RIOTEC iLS6300VBU Manuel utilisateur

RIOTEC

RIOTEC CR6300C Manuel utilisateur

RIOTEC

RIOTEC LS6300F Manuel utilisateur

RIOTEC

RIOTEC LS6300E Manuel utilisateur

RIOTEC

RIOTEC iDC9602N Manuel utilisateur

RIOTEC

RIOTEC iDC9507A Manuel utilisateur

RIOTEC

RIOTEC iLS6300JBU Manuel utilisateur

RIOTEC

RIOTEC iCR6307AB Manuel utilisateur

RIOTEC

RIOTEC iDC9277L Manuel utilisateur

RIOTEC

RIOTEC iDC9500 Manuel utilisateur

RIOTEC

RIOTEC OM7228J Manuel utilisateur

RIOTEC

RIOTEC LS6308J Manuel utilisateur

RIOTEC

RIOTEC DC9270D Manuel utilisateur

RIOTEC

RIOTEC iDC9273A Manuel utilisateur

RIOTEC

RIOTEC iDC9607A Manuel utilisateur

RIOTEC

RIOTEC iLS6303XBU Manuel utilisateur

RIOTEC

RIOTEC LS6308K Manuel utilisateur

RIOTEC

RIOTEC iDC9270J Manuel utilisateur

RIOTEC

RIOTEC iDC92700 Manuel utilisateur

RIOTEC

RIOTEC iDC9500K Manuel utilisateur

RIOTEC

RIOTEC DC9257L Manuel utilisateur

RIOTEC

RIOTEC RIOSCAN iLS6307LS Manuel utilisateur

RIOTEC

RIOTEC FS5027L Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur