Rimage Everest III Manuel utilisateur

Corporate Headquarters:

Rimage Corporation

7725 Washington Avenue South

Minneapolis, MN 55439

USA

800 553 8312 (toll free US)

Service: +1 952 946 0004

(International)

Fax: +1 952 944 6956

European Headquarters:

Rimage Europe GmbH

Hans-Böckler-Straße 7

63128 Dietzenbach, Germany

Tel: +49-(0) 6074-8521-0

Fax: +49-(0) 6074-8521-21

CD and DVD Recording Software

Disclaimer

This Product, Software, or Documentation may be

designed to assist you in reproducing material in

which you own the copyright or have obtained

permission to copy from the copyright owner.

Unless you own the copyright or have permission

to copy from the copyright owner, you may be

violating copyright law and be subject to payment

of damages and other remedies. If you are

uncertain about your rights, you should contact

your legal advisor. If you are neither in possession

of the copyright nor have authorization from the

owner of the copyright, unauthorized copying of

CDs or DVDs violates national and international

legislation and can result in severe penalties.

Rimage Corporation reserves the right to make

improvements to the equipment and software

described in this document at any time without any

prior notice. Rimage Corporation reserves the right to

revise this publication and to make changes from

time to time in the content hereof without obligation of

Rimage Corporation to notify any person or

organization of such revisions or changes.

This document may contain links to web sites that

were current at the time of publication, but may have

moved or become inactive since. This document may

contain links to sites on the Internet that are owned

and operated by third parties. Rimage Corporation is

not responsible for the content of any such third-party

site.

Rimage™ is a trademark of the Rimage Corporation.

Everest III Printer™ is a trademark of the Rimage

Corporation. Dell®is registered trademark of Dell

Computer Corporation. FireWire®is a registered

trademark of Apple Computer, Inc. Macintosh®is a

registered trademark of Apple Computer, Inc.

All other trademarks and registered trademarks are

the property of their respective owners.

Support information

US, Asia/Pacific, Mexico/Latin America Europe

Rimage Corporation

7725 Washington Avenue South

Minneapolis, MN 55439

USA

Attn: Rimage Services

Service:

North America: 800-553-8312

Asia/Pacific, Mexico/ Latin America: 952-946-0004

FAX: 952-946-6956

When you contact Rimage Services, please provide:

•Unit serial number and software version.

•Functional and technical description of the problem.

•Exact error message received.

Rimage Europe GmbH

Hans-Böckler-Straße 7

63128 Dietzenbach, Germany

Tel: +49-(0) 6074-8521-0

FAX: +49-(0) 6074-8521-21

Rimage Europe Technical Website

http://www.rimage.de/support.html

Select the appropriate Support link to

learn more. If you cannot find a solution

on our website, email Rimage Services,

Europe at [email protected].

Learn more online

At www.rimage.com/support.html, you can experience Rimage’s world-class Support and

Services.

1. Select your product family. 2. Select your product. 3. Learn more on your

product page.

From your product page you can access:

•Information about the latest software and firmware updates

•Product specifications

•Troubleshooting tips and FAQs

•The latest documents

•Printing tips

•Current firmware and driver downloads

Contents

Introduction ...................................................................................... 1

Printer Requirements.......................................................................................1

Operating System requirements............................................................................1

Media requirements............................................................................................... 1

Ribbon requirements.............................................................................................1

Label design requirements....................................................................................2

Identify the parts of the Everest printer ......................................... 3

Front view........................................................................................................3

Control panel ...................................................................................................4

Rear view ........................................................................................................5

Everest printer switches ........................................................................................6

Mode switch positions ...........................................................................................6

Operate the Everest printer............................................................. 7

Powering on and off the Everest printer ..........................................................7

Installing the Everest Printer Driver .................................................................7

Installing the Everest printer driver (PC) ...............................................................7

Installing the Everest printer driver (Macintosh)....................................................8

Placing a disc on the printer tray .....................................................................9

Setting your printing preferences on a Windows PC .....................................10

Navigate to printing preferences (PC).................................................................10

Setting media size, media type, orientation, and ribbon type (PC) .....................11

Setting print quality, color matching, and image adjustments (PC)..................... 12

Setting the printable area (PC)............................................................................13

Adjusting the print alignment and color density (PC) .......................................... 14

Setting your printing preferences on a Macintosh..........................................15

Navigate to printing preferences (Macintosh)......................................................15

Setting media type, ribbon type, and print quality (Macintosh)............................15

Setting color matching, brightness, and threshold (Macintosh)...........................16

Setting the printable area (Macintosh) ................................................................17

Adjusting the print alignment and color density (Macintosh)...............................18

Checking the ribbon remaining......................................................................19

Maintain the Everest printer.......................................................... 20

Maintenance schedule...................................................................................20

Changing the print ribbon ..............................................................................21

110875_A i

Rimage Everest III printer

Changing the retransfer ribbon......................................................................23

Cleaning the Everest printer ..........................................................................25

Clean the print head with the Everest cleaning kit ..............................................25

Clean the tacky rollers with the Everest cleaning kit ...........................................26

Clean the air filter ................................................................................................27

Clean the platen roller with the Everest cleaning kit............................................ 27

Learn More...................................................................................... 29

Everest Printer Specifications .............................................................................29

Rimage™ Cautions and Warnings................................................ 30

Everest III Printer...........................................................................................30

Technical support and product updates ..............................................................30

Safety information ...............................................................................................30

Safety testing.......................................................................................................32

Rimage Everest III Printer Limited 1 Year Warranty ...........................................35

Introduction

110875_A 1

Introduction

This manual provides the information needed to operate the Rimage Everest III printer, identify

the parts, and configure printing preferences. To unpack and set up your Everest printer, refer to

the Everest Unpacking and Setup Instructions included with your product.

Printer Requirements

Operating System requirements

The Rimage Everest printer is compatible only with Windows®2000 Professional, Windows® XP

Professional, and Macintosh®OSX v 10.3/10.4.

Media requirements

You must use discs that are coated with a surface designed for thermal printing. The media in

Rimage Media Kits™ is designed for optimum use in the Everest printer.

For more information about Rimage Media Kits™ – convenient packages of thermal retransfer-

printable discs and ribbons, all guaranteed by Rimage – contact Rimage at 800-445-8288.

Ribbon requirements

-Important: Use only Everest III print ribbons with the Everest III printer. Print ribbons

designed for the Everest II printer or earlier will not print correctly in the Everest III printer.

The Everest printer requires a print ribbon and a retransfer ribbon. The standard print ribbon has

three colors: Cyan, Magenta, and Yellow (CMY). These three colors combine in printing to create

full color discs. Print ribbons are also available in black and CMY+White (CMY+W).

Ribbons Part Number Number of Discs Printed

3-Color (CMY) 203638-001 500

4-Color (CMY+W) 203639-001 375

Black (monochrome) 203640-001 1000

Retransfer ribbon 203474-001 500

Retransfer ribbon 203384-001 1000

Rimage Everest III printer

2 110875_A

Label design requirements

The Everest printer Windows compatible software ships with a label editor called CD Designer™,

which is installed on your PC during a typical installation of the Rimage software. If you have a

Windows based PC, you can use CD Designer to design your labels.

Notes:

oCD Designer is not Macintosh compatible and will not be installed with the Macintosh

compatible software.

oIf you are using a Macintosh computer or you have another software application that you

prefer, you can create a label and save it as an Acrobat® (.pdf) file, a .jpg file, or a .tiff file.

-Important!

oIf you are using a standalone Everest printer or an AutoEverest AutoPrinter, you can print

using a label file designed in any program.

oIf your Everest printer is on a Rimage autoloader (except the AutoEverest AutoPrinter)

and using Windows compatible software, only the Acrobat (.pdf) or CD Designer (.btw)

file can print directly to the Everest printer.

To create a label with a software application other than CD Designer, use the following criteria:

•Color depth – Save the artwork for the label with the color set to millions of colors.

•DPI – Use pictures or logos set to 300 DPI (dots per inch).

•Label design size – A full size disc is 120 mm (4.723”). The hole is 15 mm (0.59”). The

printable area and hub sizes vary depending on the disc manufacturer.

Printable

Area 118 mm

Hub Size

24 mm

•Media – The media that is in Rimage Media Kits™ has a printable area of 24-118 mm.

On most labels, print settings of 24 mm and 118 mm are recommended. For more

information about Rimage Media Kits™ – convenient packages of thermal retransfer-

printable discs and ribbons, all guaranteed by Rimage – contact Rimage at 800-445-

8288.

Identify the parts of the Everest printer

110875_A 3

Identify the parts of the Everest printer

This section describes the Everest printer hardware and features.

Front view

Side cover latches

Handle

Side cove

Control panel

Printer tray

Rimage Everest III printer

4 110875_A

Control panel

The control panel, located on the front of the printer, includes an operator button

and four indicator lights. The control panel allows you to monitor and control the

Everest printer.

#Tip: If all indicator lights are blinking, the printer did not initialize properly. To

correct this issue:

1. Remove the power cord. The Everest printer powers down.

2. Set the mode switch to the proper position. For more information, refer

to the table on page 6.

3. Reconnect the power cord. The Everest printer powers on.

Control panel indicators

Image Name Functionality

Operator Button The Operator button is used to complete the following

tasks:

•Open the printer tray

•Close the printer tray

•Reset after an error

•Put the printer in sleep mode

#Tip: To put the printer into sleep mode, press and

hold the Operator button for 10 seconds. Press

the Operator button again to resume normal

operation.

The Error indicator light, located on the operator button,

illuminates when operator action is required.

Error indicator light

Disc Present

indicator light

The Disc Present indicator light illuminates when a disc

is placed on the tray or when the disc is properly

clamped.

The Disc Present indicator light flashes when an

Everest print latch is open or a ribbon is not detected.

Active indicator light The Active indicator light illuminates when the printer

has completed initialization.

The Active indicator light flashes when the Everest

printer is receiving data from the host.

The Power indicator light illuminates when the Everest

printer is powered on.

Power indicator light

Autres manuels pour Everest III

Table des matières

Langues :

Autres manuels Rimage Imprimante

Rimage

Rimage Everest 600 Manuel utilisateur

Rimage

Rimage 480i Instructions d'utilisation et de sécurité

Rimage

Rimage Desktop 360i Manuel de référence

Rimage

Rimage AutoEverest AutoPrinter Instructions d'utilisation et de sécurité

Rimage

Rimage Amigo II Manuel utilisateur

Rimage

Rimage Producer IIIN Manuel utilisateur

Rimage

Rimage 5400N Disc Copy Station Manuel utilisateur

Rimage

Rimage AutoPrinter Manuel utilisateur

Rimage

Rimage PrismPlus! Manuel utilisateur

Rimage

Rimage Prism III Manuel utilisateur

Rimage

Rimage Desktop 360i Manuel utilisateur

Rimage

Rimage PrismPlus! Manuel utilisateur

Rimage

Rimage Amigo II Manuel utilisateur

Rimage

Rimage 480i Manuel de la liste des pièces

Rimage

Rimage Everest Encore Manuel utilisateur

Rimage

Rimage AutoEverest AutoPrinter Manuel utilisateur

Rimage

Rimage Professional 5400N Manuel utilisateur

Rimage

Rimage Professional 3400 Manuel utilisateur

Rimage

Rimage Everest II Instructions d'installation

Rimage

Rimage Professional 5100N Manuel de la liste des pièces

Rimage

Rimage Amigo II Manuel utilisateur

Rimage

Rimage Amigo II Instructions d'installation

Rimage

Rimage Allegro 100 Manuel utilisateur

Rimage

Rimage Autostar II Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur