Rimage Amigo II Manuel utilisateur

Serial Cable

FireWire Cable

USB Cable

Printer Cable

Printer Power Cord

USB Cable

Printer Cable

Serial Cable

(Amigo II only)

FireWire Cable (Amigo II only)

Power Cord

USB Cable

Tie Wrap

Tape

Foam

Replace the Producer II

Before you begin:

1. Stop or pause all jobs.

2. Power off the external control center (PC).

3. Power off the Producer II.

4. Disconnect the power cord from the Producer II.

5. Remove the cover (Autostar II and Protégé II only).

Caution: Some cables in your system may be latched. Equipment

damage may occur if cables are not disconnected appropriately.

Caution: Lift the Everest printer with care; it is very heavy.

1Disconnect the autoloader cables.

2Disconnect the printer and autoloader cables.

Use this procedure to set up your replacement unit when you are completing a rapid

exchange.

The term ‘Producer II’ is used throughout this document to refer to the Autostar II,

Protégé II, Amigo II, and AutoPrinter II.

 Note: The photos in this document are of the Autostar II, Protégé II, Amigo II, or

AutoPrinter II. Your system may not look exactly like the system pictured.

At the back of the Producer II, disconnect the cables:

USB cable (Autostar II & Protégé II only)

Power cord

Serial cable

FireWire Cable

•

a. At the back of the printer, disconnect the cables:

Printer cable

Printer power cord

USB cable

•

b. Remove the printer from the autoloader and set it aside.

Everest printer

Prism printer

Autostar II and Protégé II

Amigo II or AutoPrinter II

3Pack the autoloader to return.

a. Tape the power cord and cables to the top of the autoloader.

b. Lower the lift arm.

c. Place a tie wrap around the belt, just below the pulley.

d. Insert the shipping foam just above the carousel.

e. Tape the mailbox feed tray to the side of the autoloader.

Continued on next page











Complete the steps in the Rimage Autostar II and Protégé II Setup and

Installation (110630), Rimage Amigo II Setup and Installation (110655), Rimage

AutoEverest Setup and Installation (110660), or Rimage AutoPrism Setup and

Installation (110824) included with your product. These documents are also

available at

www.Rimage.com/Support.html. Navigate: Producer Family > Support - your

product > Documents tab.

 Note: You are installing the same printer that you removed from the

Producer II.

Refer to the label on the box of your replacement Producer II.

Unpack the replacement Producer II.

Set up the replacement Producer II.

5Pack the autoloader to return.

Autres manuels pour Amigo II

Ce manuel convient aux modèles suivants

Autres manuels Rimage Imprimante

Rimage

Rimage Everest 600 Manuel utilisateur

Rimage

Rimage Amigo II Instructions d'utilisation et de sécurité

Rimage

Rimage Professional 5400N Manuel utilisateur

Rimage

Rimage AutoEverest AutoPrinter Instructions d'utilisation et de sécurité

Rimage

Rimage Everest 600 Manuel utilisateur

Rimage

Rimage Amigo II Instructions d'installation

Rimage

Rimage Everest Encore Instructions d'utilisation et de sécurité

Rimage

Rimage Professional 3400 Manuel utilisateur

Rimage

Rimage Prism III Manuel utilisateur

Rimage

Rimage Desktop 360i Manuel

Rimage

Rimage AutoPrinter II Manuel utilisateur

Rimage

Rimage Everest Encore Manuel utilisateur

Rimage

Rimage Desktop 360i Manuel d'utilisation et d'entretien

Rimage

Rimage PrismPlus! Manuel utilisateur

Rimage

Rimage Prism Manuel utilisateur

Rimage

Rimage 110705-000 Manuel utilisateur

Rimage

Rimage Everest Guide de démarrage rapide

Rimage

Rimage 480i Manuel utilisateur

Rimage

Rimage Everest 600 Manuel utilisateur

Rimage

Rimage Professional 5100N Manuel de la liste des pièces

Rimage

Rimage Prism Mode d’emploi

Rimage

Rimage 480i Mode d’emploi

Rimage

Rimage 480i Fiche technique

Rimage

Rimage Prism III Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur