Rimage Desktop 360i Instructions d'utilisation et de sécurité

110809_B 1

a. Connect the USB 2.0 cable from the Rimage 360i to your PC

USB 2.0 port.

b. Connect the power cord

from the Rimage 360i to

the power outlet.

a. Power on your PC.

b. At your PC, insert the

Rimage 360i Software

disc in the

PC disc drive.

c. Follow the onscreen prompts to complete the installation.

In Windows 2000, a warning message that the software

you are about to install does not contain a digital signature

displays. To install the software, select Yes.

In Windows XP, a warning message that the software has

not passed Windows Logo testing displays. To install the

software, select Continue Anyway.

d. When the Installation Status screen displays Rimage

software was successfully installed, select Finish.

Install the Rimage 360i software.

If you are unfamiliar with the procedures in this document, ask your

computer technician for help or refer to your PC documentation.

Before you begin:

• You must have administrative privileges to install and operate the

Rimage 360i software on your PC.

• Do not plug in any cables until you are instructed to do so.

• Obtain a computer than meets the PC speciﬁcations listed in the

‘Learn more’ section of your Rimage 360i User Guide.

1 2

Setup and Installation

for Windows®

Connect the Rimage 360i cables.

Important! You must have administrative privileges to

install and operate the Rimage 360i software on your PC.



USB 2.0

Cable

Power

Cord

 Note: If the software installation does not start

automatically, navigate: Start > Run > Browse and

select the Setup ﬁle from the disc.

 Note: Leave the software disc in the disc drive

until you have completed step 3.

 Note: The PC must have a USB 2.0 port. For more

information, refer to the computer speciﬁcations

listed in the ‘Learn More’ section of your Rimage 360i

User Guide.

2110809_B

43 5

Install the printer driver. Install the ink cartridges. Activate your software.

Learn more.

For more information about operating and maintaining your

Rimage 360i, refer to your Rimage 360i User Guide.

After software installation, a version of the Rimage 360i

User Guide in the langauge you selected during software

installation is available in PDF format on your hard drive at

Start > Programs > Rimage > Manuals.

For information about the software included with your Rimage

360i, refer to the online help.

For additional support and product information,

go to www.rimage.com/support.html.

You have 30 days to activate your software. Until your

software is activated, you will be prompted to activate your

software each time you use it.

a. Open the ink cartridge

access door.

b. When the ink cartridge carriage is still, lift both ink

cartridges latches.

c. Slide the matching ink cartridges into the matching

carriages as shown.

d. Close the ink cartridge

latches.

e. Close the ink cartridge

access door. The printer

initializes.

f. Align the ink cartridges. For speciﬁc instructions,

refer to the Rimage 360i User Guide.

Ink cartridge

latch

a. To power on the Rimage 360i, press the power

switch. The Rimage 360i initializes.

In Windows 2000, the printer driver installation

completes automatically.

In Windows XP, the Found New Hardware Wizard

displays. To install the required printer driver, complete

the following prompts:

i. In the Found New Hardware Wizard, select No,

not this time. Windows searches for the installed

driver.

ii. Select Next. The window updates.

iii. Select Install the software automatically.

iv. Select Next. A warning message that the software

has not passed Windows Logo Testing displays.

v. Select Continue Anyway. The driver installation

starts.

vi. At the Completing the Found New Hardware

Wizard window, select Finish.

b. Remove the Rimage 360i Software disc from the PC

disc drive.

Ink Cartridge

Access Door

Autres manuels pour Desktop 360i

Table des matières

Autres manuels Rimage Imprimante

Rimage

Rimage 5400N Disc Copy Station Manuel utilisateur

Rimage

Rimage Amigo II Instructions d'installation

Rimage

Rimage Autostar II Instructions d'utilisation et de sécurité

Rimage

Rimage AutoPrism Manuel utilisateur

Rimage

Rimage Desktop 360i Manuel d'utilisation et d'entretien

Rimage

Rimage Amigo II Manuel

Rimage

Rimage 480i Fiche technique

Rimage

Rimage Producer IIIN Manuel utilisateur

Rimage

Rimage AutoEverest AutoPrinter Manuel utilisateur

Rimage

Rimage Professional 3400 Manuel utilisateur

Rimage

Rimage AutoPrinter II Manuel utilisateur

Rimage

Rimage 480i Mode d’emploi

Rimage

Rimage Everest II Instructions d'installation

Rimage

Rimage Everest 600 Manuel utilisateur

Rimage

Rimage Prism Manuel utilisateur

Rimage

Rimage Everest Manuel utilisateur

Rimage

Rimage Prism CDPR11 Manuel utilisateur

Rimage

Rimage Desktop 360i Manuel de la liste des pièces

Rimage

Rimage Everest III Manuel utilisateur

Rimage

Rimage Amigo II Manuel utilisateur

Rimage

Rimage AutoPrism Instructions d'utilisation et de sécurité

Rimage

Rimage Prism Mode d’emploi

Rimage

Rimage Amigo II Manuel utilisateur

Rimage

Rimage 480i Manuel de la liste des pièces

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur