Rimage 480i Mode d’emploi

Adjust the Print Head on a Rimage® 480i Printer

Adjust a Print Head on a Rimage® 480i Printer

This document explains how to adjust a print head on a 480i printer in a Rimage 2000i autoloader.

Before you begin:

1. Stop or pause all jobs.

2. Power off the external control center (PC).

3. Power off the Rimage 2000i.

4. Disconnect the power cord from the 2000i.

5. Disconnect the power cord from the power outlet.

Required tools:

•Screwdriver

•One disc

1. Access the internal hardware of the 480i printer.

a. Open the printer service door on the top of

the Rimage 2000i.

b. Locate the adjustment knobs (Qty. 2).

Note: The knob on the left adjusts the

black ink cartridge, the knob on the right

adjusts the color ink cartridge.

2. Adjust the print head.

a. Turn the adjustment knob to the left to raise

the print head.

b. Turn the adjustment knob to the right to lower

the print head.

Tip: Place a screwdriver in the center of

the adjustment knob to turn it in the

desired direction.

Adjust the Print Head on a Rimage® 480i Printer

3. Check the print head adjustment.

a. Place a disc (Qty. 1) on the printer tray.

b. Manually move the printer tray about half way

into the printer.

c. Manually move the ink carriage so that it sits

directly over the center of the disc.

d. From the back of the system, make sure that

the print head on either ink cartridge is flush

with the surface of the disc.



Important! You should be able to move

the printer tray in and out without

scratching the disc on the print head.

4. Run diagnostic test 6 (print test) to check the print head alignment.



Important! Make sure that the Rimage 2000i is not in an error state before running diagnostic test 6. If

the system is in an error state, one or more of the indicator lights on the printer control panel will flash

when the system is powered on. Refer to the Rimage 480i User Guide for more information.

a. Power on the system.

i. Connect the power cord to the back of the Rimage 2000i.

ii. Connect the power cord to the power outlet.

iii. Power on the Rimage 2000i.

iv. Allow the system to fully initialize. This may take up to 5 minutes.

b. Perform printer diagnostic test 6.

i. Press and hold the cancel (X) button.

ii. While holding the cancel (X) button, press the tray button (middle button) 6 times.

iii. Release the tray button.

iv. Release the cancel (X) button. Diagnostic test 6 begins. The printer prints a disc with horizontal

and vertical lines.

5. Make sure that the lines printed on the disc are not blurred or smudged. If you see imperfections on the

printed disc, repeat the procedure in this document to adjust the print head accordingly.

Printer Tray

Disc

Print Head

Adjust the Print Head on a Rimage® 480i Printer

Support information

Contact Rimage US, Asia/Pacific, Mexico/Latin America: When you contact Rimage Support, please provide:



Web:

www.rimage.com/support



KnowledgeBase: http://rimage.custhelp.com



North America: 800-553-8312



Asia/Pacific, Mexico/Latin America: 952-946-0004

•Unit serial number and software version.

•Functional and technical description of the problem.

•Exact error message received.

Contact Rimage Europe: Rimage Corporation reserves the right to make improvements

to the equipment and software described in this document at

any time without any prior notice. Rimage Corporation

reserves the right to revise this publication and to make

changes from time to time in the content hereof without

obligation of Rimage Corporation to notify any person or

organization of such revisions or changes.



Web: www.rimage.de



Email: support@rimage.de



Tel: +49-(0) 1805-7462-43



Fax: +49-(0) 6074-8521-101

Autres manuels pour 480i

Ce manuel convient aux modèles suivants

Autres manuels Rimage Imprimante

Rimage

Rimage Desktop 360i Manuel de la liste des pièces

Rimage

Rimage Professional 5100N Manuel de la liste des pièces

Rimage

Rimage Producer IIIN Manuel utilisateur

Rimage

Rimage PrismPlus! Manuel utilisateur

Rimage

Rimage AutoPrinter II Manuel utilisateur

Rimage

Rimage Amigo II Manuel utilisateur

Rimage

Rimage Prism Manuel utilisateur

Rimage

Rimage Desktop 360i Instructions d'utilisation et de sécurité

Rimage

Rimage Prism Mode d’emploi

Rimage

Rimage Desktop 360i Manuel d'utilisation et d'entretien

Rimage

Rimage PrismPlus! Manuel utilisateur

Rimage

Rimage CDPR6 Manuel utilisateur

Rimage

Rimage Amigo II Manuel utilisateur

Rimage

Rimage 480i Manuel utilisateur

Rimage

Rimage 5400N Disc Copy Station Manuel utilisateur

Rimage

Rimage Professional 3400 Manuel utilisateur

Rimage

Rimage Autostar II Instructions d'utilisation et de sécurité

Rimage

Rimage Everest Guide de démarrage rapide

Rimage

Rimage Prism III Manuel utilisateur

Rimage

Rimage 480i Fiche technique

Rimage

Rimage Prism Manuel de service

Rimage

Rimage Prism III Manuel utilisateur

Rimage

Rimage Everest III Manuel utilisateur

Rimage

Rimage 110705-000 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur