Rigol DS1102E Manuel utilisateur

RIGOL

Data Sheet

DS1000E, DS1000D Series

Digital Oscilloscopes

DS1102E, DS1052E, DS1102D, DS1052D

Main Features

Dual analog channels and 16 channels logic

analyzer, 100MHz maximum bandwidth,

1GSa/s maximum real-time Sample rate and

25GSa/s maximum equivalent Sample rate

5.6 inch and 64 k TFT LCD make the

waveform displays more clear and vivid

Abundant trigger types: Edge, Pulse Width,

Video, Slope, Alternate, Pattern and

Duration

Unique adjustable trigger sensitivity enables

to meet different demands

Enable to measure 20 types of wave

parameters and track measurements via

cursor automatically

Unique waveform record and replay

function

Fine delayed scan function

Built-in FFT function, hold practical digital

filters

Pass/Fail detection function enables to

output testing results

Math operations available to multiple waves

Powerful PC application software UltraScope

Standard configuration interface: USB

Device, USB Host , RS-232 and support U

disk storage and PictBridge print standards

The new function “Key Lock” can meet the

needs of industrial production

Support for remote command control

May. 2013

RIGOL Technologies, Inc.

Applications

Electronic Circuit Test

Circuit Functional Test

Logical Relation Between Singals

Verification

Circuit of Mixed Signal Test

Education & Training

Product Overview

DS1000E, DS1000D series are kinds of economical

digital oscilloscope with high-performance.

DS1000E series are designed with dual channels

and 1 external trigger channel.

DS1000D series are designed with dual channels

and 1 external trigger channel as well as 16

channels logic analyzer.

Easy to Use Design

Built-in help menu enables information

getting more convenient

Multiple Language User Interface, support

Chinese & English input

Support U disk and local files storage

Waveform intensity can be adjusted

To display a signal automatically by AUTO

Pop-up menu makes it easy to read and use

Automatically Measure 20 Wave Parameters

Automatic measure FFT cursor measure

Digital channels setup

Waveform recording

Cursor Measure

Pattern trigger

Key Lock function

This function is widely used in most productions. All keys are locked

except F1 to F5 and MENU ON/OFF in this mode.

To lock the keyboard, use menu; to unlock, correct code has to be input.

Also, you can reset a new code if necessary.

RIGOL provides powerful PC application software: UltraScope, which

enables to: Capture and measure wave; Perform local or remote

operation; Save waves as “.bmp” format; Save files as “.txt” or “.xls”

format; Print waveforms.

Measurement window

UltraScope Software

Key Lock

Pass/Fail testing

16 Channels Logic Analyzer

Being equipped with 16 channels logic analyzer, DS1000D series mixed

signal oscilloscopes achieve mixed signal measure coordinating with 2

analog channels.

Each channel can be turned on or off independently, or in groups of

8(D7-D0 and D15-D8); also, you can set waveform size and threshold

types or change the display position on screen for digital channel.

Waveform Recording

In virtue of waveform recording function from DS1000E and DS1000D, not

only the outputs from two channels could be recorded, but also the waves

outputted by Pass/Fail test could be easily recorded. Totally, up to 1000

frames of waves are available to record. Besides, users can analyze waves

according to reall or save

transient waves so as to get more exact datum.

Pass/Fail Testing

The Pass/Fail function monitors the changes of signals by comparing

whether the input signal is within the pre-defined mask. The testing results

not only can be displayed on screen or output by isolated pass/fail port, but

also can be alarmed according to turn on system sound.

DS1000E, DS1000D series oscilloscopes

provide 20 types of wave parameters for

automatically measuring, which contains

10 Voltage and 10 Time parameters.

Both DS1000E and DS1000D series contain abundant triggers:

Edge trigger, Pulse Width trigger, Video trigger, Slope trigger

Alternate trigger, Pattern trigger (DS1000D), Duration trigger

(DS1000D)

Especially the duration trigger is a new type from perfect combination of

patten and pulse width trigger. Unique function of adjustable trigger

sensitivity is good for filtering possible noise from signal in order to avoid

false triggers.

Multiple Trigger

In cursor mode, users can easily

measure by moving cursor. Besides, 3

types of cursor measurement are

optional: Manual, Track and Auto.

Specifications

All specifications apply to DS1000E, DS1000D Series Oscilloscopes unless where noted. To come up to

these specifications, two conditions must be met firstly:

The instrument must have been operated continuously for 30 minutes under the specified

operating temperature.

Do perform Self-Calibration operation through the Utility menu if the range of operating

temperature variations up to or more than 5°C.

NOTE: All specifications are guaranteed unless where marked “typical”.

Specifications

Bandwidth

DS1102E

DS1052E

DS1102D

DS1052D

100MHz

50MHz

100MHz

50MHz

Acquisition

Sample Modes

Real-Time Sample

Equivalent Sample

Sample Rate 1GSa/s[1], 500MSa/s

DS1102X

DS1052X

25GSa/s

10GSa/s

Averages

The waveform will be displayed one time while all the channels finish N

times Sample, N could be selectable from 2, 4, 8, 16, 32, 64, 128 and 256

Inputs

Input Coupling

DC, AC, GND

Input Impedance

1MΩ±2%, the input capacity is 18pF±3pF

Probe Attenuation Factors

1X, 5X, 10X, 50X, 100X, 500X,1000X

Maximum Input Voltage

400V (DC

＋

AC Peak, 1MΩ input impedance)

40V (DC+AC Peak)

[2]

Time Delay between Channel (typical)

500ps

Horizontal

Sample Rate Range

Real-Time: 13.65Sa/s-1GSa/s

Equivalent: 13.65Sa/s-25GSa/s

Waveform Interpolation

Sin(x)/x

Memory Depth

Channel

Mode

Sample rate

Memory Depth

(normal)

Memory Depth

(long memory)

Single

channel

1GSa/s 16kpts N.A.

Single

channel

500MSa/s

or lower

16kpts 1Mpts

Dual

channel

500MSa/s

or lower

8kpts N.A.

Dual

channel

250MSa/s

or lower

8kpts 512kpts

Scanning Speed Range

(Sec/div)

2ns/div~50s/div, DS1102X

5ns/div~50s/div, DS1052X

1-2-5 Sequence

Sample Rate and Delay

Time Accuracy

±50ppm (any interval ≥1ms)

Delta Time

Measurement Accuracy

(Full Bandwidth)

Single: ±(1 Sample interval + 50ppm × reading + 0.6 ns)

>16 averages: ±(1Sample interval + 50ppm × reading + 0.4 ns)

Vertical

A/D Converter

8-bit resolution, all channels sample simultaneously

Volts/div Range

2mV/div~10V/div (at the input terminal connecting to BNC)

Maximum Input

Maximum input voltage on analog channel

CAT I 300Vrms, 1000Vpk; instantaneous overvoltage 1000Vpk

CAT II 100Vrms, 1000Vpk

RP2200 10:1：CAT II 300Vrms

RP3200 10:1：CAT II 300Vrms

RP3300 10:1：CAT II 300Vrms

Offset Range

±40V (250mV/div~10V/div)

±2V (2mV/div~245mV/div)

Analog Bandwidth

100MHz (DS1102D,DS1102E)

50MHz (DS1052D, DS1052E)

Single-shot Bandwidth

100MHz (DS1102D, DS1102E)

50MHz (DS1052D, DS1052E)

Selectable Analog

Bandwidth Limit (typical)

20MHz

Lower Frequency

Response (AC –3dB)

≤5Hz (at input BNC)

Rise Time at BNC (typical)

<3.5ns, <7ns, respectively at 100MHz, 50MHz

Dynamic range

±5div

DC Gain Accuracy

2mV/div-5mV/div:

±4% (In Normal or Average acquisition mode)

10mV/div-10V/div:

±3% (In Normal or Average acquisition mode)

DC Measurement

Accuracy, Average

Acquisition Mode

When vertical displacement is zero, and N ≥16:

±(DC Gain Accuracy×reading+0.1div+1mV)

When vertical displacement is not zero, and N ≥16:

±[DC Gain Accuracy×(reading+vertical displacement)+(1% of

vertical displacement) + 0.2div]

When vertical scale is between 2mV/div and 245mV/div, add 2mV

more for setting value.

When vertical scale is between 250mV/div and 10V/div, add 50mV

more for setting value.

Delta Volts

Measurement Accuracy

(Average Acquisition Mode)

U nder sam e setting and condition, the voltage difference (△V)

between any two points in the waves coming from the average of

more than 16 waves have been acquired:

±(DC Gain

Accuracy×reading + 0.05 div)

Trigger

Trigger Sensitivity

0.1div~1.0div (adjustable)

Trigger Level Range

Internal

±6 divisions from center of screen

EXT

±1.2V

Trigger Level Accuracy (typical)

applicable for the signal of

rising and falling time ≥20ns

Internal

±(0.3div × V/div)(±4 divisions from center of screen)

EXT ±(6% of setting + 200 mV)

Trigger Offset In Normal mode: pre-trigger (memory depth/ 2*Sample rate),

delayed trigger 1s

In Slow Scan mode: pre-trigger 6div, delayed trigger 6div

Trigger Holdoff Range 500ns~1.5s

Set Level to 50% (typical) When input signal frequency ≥50Hz

Edge Trigger

Edge trigger slope

Rising, Falling, Rising + Falling

Pulse WidthTrigger

Trigger Condition

(

＞

＜

, =) Positive pulse width, (

＞

＜

, =) Negative pulse width

Pulse Width Range

20ns ~10s

Video Trigger

Video Standard

Line Frequency

Support for standard NTSC, PAL and SECAM broadcast systems. Line

number range: 1~525 (NTSC) and 1~625 (PAL/SECAM)

Slope Trigger

Trigger Condition

(

＞

＜

, =) Positive slope, (

＞

＜

, =) Negative slope

Time Setting

20ns~10s

Alternate Trigger

Trigger on CH1

Edge, Pulse Width, Video, Slope

Trigger on CH2

Edge, Pulse Width, Video, Slope

Pattern Trigger[2]

Pattern Type

D0~D15 select H, L, X, ,

Duration Trigger[2]

Pattern Type

D0~D15 select H, L, X

Qualifier

＞

＜

, =

Time Setting

20ns~10s

Measurements

Cursor

Manual

Voltage difference between cursors (∆V)

Time difference between cursors (∆T)

Reciprocal of ∆T in Hertz (1/∆T)

Track

Voltage value for Y-axis waveform

Time value for X-axis waveform

Auto

Cursors are visible for Automatic Measurement

Auto Measure

Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq,

Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1→2,

Delay1→2

Remarks:

[1] Only one channel is available when the Sample rate is 1GSa/s.

[2] For DS1000D Series.

General Specifications

Display

Display Type

145mm (5.6 inch) diagonal TFT Liquid Crystal Display

Display Resolution

320 horizontal ×RGB×234 vertical pixels

Display Color

64k color

Display Contrast (typical)

150:1

Backlight Brightness (typical)

300 nit

Probe Compensator Output

Output Voltage (typical)

Approximately 3Vpp (peak to peak value)

Frequency (typical)

1kHz

Power Supply

Supply Voltage

100 ~ 240VACRMS, 45~440Hz, CAT II

Power Consumption

Less than 50W

Fuse

2A, T level, 250 V

Environmental

Ambient Temperature

Operating 10

℃

~ 40

℃

Non-operating -20

℃

~ +60

℃

Cooling Method

fan cooling

Humidity

below +35

℃

: ≤90% relative humidity

+35

℃

~ +40

℃

: ≤60% relative humidity

Altitude

Operating at 3,000 m or below

Non-operating at 15,000 m or below

Mechanical

Dimensions

Width

303mm

Height

154mm

Depth

133mm

Weight

Without package

2.3kg

Packaged

3.5kg

IP Protection

IP2X

Calibration Interval

The recommended calibration interval is one year

Ordering Information

Name of Product

RIGOL DS1000E, DS1000D series oscilloscopes

Standard Accessories

Probe×2 (1.5m), (1:1 or 10:1 adjustable)

Passive Probes

A Power Cord that fits the standard of

destination country

A USB Cable

A Data Cable (DS1000D series)

An Active Logic Head (DS1000D series)

20 Logic Testing Nips (DS1000D series)

20 Logic Testing leads (DS1000D series)

A CD-ROM (including User’s Guide and

Application Software)

A Quick Guide

Optional Accessories

BNC Cable

USB Data Cable

RS232 Cable

USB-GPIB Adapter

DS1000E, DS1000D soft carrying case

Warranty

Thank you for choosing RIGOL products!

RIGOL Technologies, Inc. warrants that this

product will be free from defects in materials and

workmanship from the date of shipment. If a

product proved defective within the respective

period, RIGOL will provide repair or

replacement as described in the complete

warranty statement.

For the copy of complete warranty statement or

maintenance, please contact with your nearest

RIGOL sales and service office.

RIGOL do not provide any other warranty items

except the one being provided by this summary

and the warranty statement. The warranty items

include but not being subjected to the hint

guarantee items related to tradable

characteristic and any particular purpose.

RIGOL will not take any responsibility in cases

regarding to indirect, particular and ensuing

damage.

If you have any problem or requirement when using our products, please contact RIGOL Technologies,

Inc. or your local distributors, or visit: www.rigol.com.

Autres manuels pour DS1102E

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Rigol Équipement de test

Rigol

Rigol RP7080S Manuel utilisateur

Rigol

Rigol DHO924S Manuel utilisateur

Rigol

Rigol MSQ7054 Manuel utilisateur

Rigol

Rigol DS1000E series Manuel utilisateur

Rigol

Rigol DG900 Pro Series Manuel utilisateur

Rigol

Rigol DS4024E Manuel utilisateur

Rigol

Rigol DS6000 Series Manuel utilisateur

Rigol

Rigol MSO8000 Series Manuel utilisateur

Rigol

Rigol MSO8064 Manuel utilisateur

Rigol

Rigol RP1010H Manuel utilisateur

Rigol

Rigol MSO4000 Series Manuel utilisateur

Rigol

Rigol MS05000-4CH Manuel utilisateur

Rigol

Rigol MSO2000A Series Manuel utilisateur

Rigol

Rigol DS1000Z Series Manuel utilisateur

Rigol

Rigol RP7000S Series Manuel utilisateur

Rigol

Rigol DS6000 Series Manuel utilisateur

Rigol

Rigol DS2000E Series Mode d'emploi

Rigol

Rigol MSO2000A Series Mode d'emploi

Rigol

Rigol DL3000 Series Mode d'emploi

Rigol

Rigol DS1000D series Manuel utilisateur

Rigol

Rigol DG800 Pro Series Mode d'emploi

Rigol

Rigol DS1000E series Manuel utilisateur

Rigol

Rigol MSO8000 Series Manuel utilisateur

Rigol

Rigol RP1003C Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur