Rigol DS2000 Series Guide de démarrage rapide

Autres manuels pour DS2000 Series

3

Ce manuel convient aux modèles suivants

2

Table des matières

Autres manuels Rigol Équipement de test

Rigol

Rigol DHO900 Manuel utilisateur

Rigol

Rigol DS1000Z Series Guide de démarrage rapide

Rigol

Rigol DS1000CA series Mode d'emploi

Rigol

Rigol HDO4000 Series Manuel utilisateur

Rigol

Rigol DG900 Pro Series Manuel utilisateur

Rigol

Rigol DS1102E Manuel utilisateur

Rigol

Rigol MSO5000 Series Manuel utilisateur

Rigol

Rigol SA5000 Series Mode d'emploi

Rigol

Rigol MSO8064 Manuel utilisateur

Rigol

Rigol DS4000E Series Manuel utilisateur

Rigol

Rigol DS6104 Manuel d'installation et d'exploitation

Rigol

Rigol DS1000Z Series Manuel utilisateur

Rigol

Rigol DS2000 Series Manuel utilisateur

Rigol

Rigol DS1000CA series Manuel utilisateur

Rigol

Rigol MSO5072 Manuel utilisateur

Rigol

Rigol DS4024 Manuel utilisateur

Rigol

Rigol DHO900 Manuel utilisateur

Rigol

Rigol DS1000Z-E Series Manuel utilisateur

Rigol

Rigol DS70000 Series Manuel utilisateur

Rigol

Rigol MSO5152-E Manuel utilisateur

Rigol

Rigol RP1003C Manuel utilisateur

Rigol

Rigol DS1204B Mode d'emploi

Rigol

Rigol DS8000-R Series Manuel utilisateur

Rigol

Rigol VS5000 Series Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur

FAQ

Instrument Solution –FAQ Solution Title

DS2000, DS4000, DS6000 Firmware Upgrade Procedure

Date:12/16/2013

Solution:

0. Check to see that the USB stick is recognized by inserting into the USB

input on the front panel. The instrument should indicate USB Device

Detected.

NOTE: If the device is not recognized, try another USB memory stick. We

also recommend minimizing the number of folders, files, and programs on the

stick. Drives less than 4GB in total volume are also recommended.

1. Download the proper firmware file and transfer to the root directory of a

USB memory stick. If you have downloaded the packed .rar/.zip file. Do not

forget to unpack and only copy the .GEL file to your USB stick.

2. Plug the instrument in to an uninterruptible power supply.

WARNING! Don't power cycle or disturb the instrument until the upgrade is

complete.. as the instrument can be damaged.

NOTE: USB Stick is not plugged in DS2000/DS4000/DS6000 at this time!!!

3. Press the power on button on the front panel of the instrument.All of the

buttons will light. At the same time press two or three times the Help key on

the front panel. All buttons will unlight

4. If you now can see the Rigol Logo on the screen you failed to go into update

mode. Please go back to step 3.

If the screen stays black and the Single light will illuminate (as below in the

picture) you can go ahead.

5. Now it is time to insert the USB stick into the front panel.

6. The CH1 button will flash and then go solid.

7. After 5-10 minutes, all of the buttons on the front panel will be lit. The

upgrade is complete.

8. Remove the USB drive and power cycle the instrument.

9. Special Note for DS2000/DS2000A users:

There are two possible issues which can arise during the first re-boot after

the update:

1.) The DS2000 stick during booting. (RIGOL logo visible on the screen)

Solution:

Reboot again and press the 6th button from above on the left side of the

screen again and again till the boot process is finished.

Scope should now work as usual.

2.) After the first successful boot the screen looks scrambled and the

parameters are wrong.

Solution:

Press Storage Button -> press soft key Default and load the factory

default values.

10. You can check the firmware revision by pressing

Utility > System > System info