Ricoh Pro L4130 Manuel utilisateur

RICOH Pro L4130/L4160 Print Guide

Thank you for purchasing our printer cutter RICOH Pro L4130/L4160.

This “Print Guide” explains the printing method using RICOH Pro L4130/L4160 and the attached software RIP

[RICOH Software RIP] and items to be checked/set before printing.

First, confirm the following items:

Before printing, the preparation for RICOH Pro L4130/L4160 and the software RIP [RICOH Software RIP] is

required.

First, prepare the followings:

About system configuration (Refer to P. 2)

The explanation of the system configuration to print is described.

Prepare RICOH Pro L4130/L4160 (Refer to P. 3)

To use RICOH Pro L4130/L4160, the items below are explained:

Connect the PC in which the software [RICOH Software RIP] has been installed with

RICOH Pro L4130/L4160.

Turn on the power supply.

Depending on the media to be set, adjust the print head height etc.

Set the media.

Perform test printing to check whether there is no nozzle clogging etc.

Correct the feeding rate of media.

Correct the ink drop position.

Prepare the RICOH Software RIP (Refer to P. 4)

The preparation of the software [RICOH Software RIP] is explained.

For the installation method, refer to the manual of the RICOH Software RIP.

The printing method using a sample is

explained.

Here, the printing method using a sample image included in the attached CD.

Perform printing (Refer to P. 5)

Some typical questions are described.

Typical questions (Refer to P. 7)

- 2 -

First, confirm the following items:

About system configuration

Instruct to print the printing data created with the application such as Illustrator or Photoshop etc. from the PC in

which the attached RICOH Software RIP has been installed.

RICOH Software RIP

Send the data to be printed to the PC in which

RICOH Software RIP has been installed.

Instruct to print from RICOH

Software RIP.

- 3 -

Prepare RICOH Pro L4130/L4160

Following the procedures below, prepare RICOH Pro L4130/L4160.

1. Connect a PC in which the attached

RICOH Software RIP is installed with

RICOH Pro L4130/L4160.

• For details, refer to P.1-10 of RICOH Pro L4130/

L4160 Operation Manual.

2. Turn on the power supply of RICOH Pro

L4130/L4160.

• For details, refer to P.2-3 of RICOH Pro L4130/L4160

Operation Manual.

3. Before setting a media, check the height of

print head.

• For details, refer to P.2-5 of RICOH Pro L4130/L4160

Operation Manual.

• Adjust the Height-adjusting lever depending on the

media to be used.

4. Set the media.

• When setting the roll media : P.2-8 to 12 of RICOH Pro L4130/L4160 Operation Manual

• When setting the leaf media : P.2-14 to 15 of RICOH Pro L4130/L4160 Operation Manual

5. Perform a test printing.

• Check if discharging defect such as nozzle clogging exists or not.

• For details, refer to P.2-20 to 21 of RICOH Pro L4130/L4160 Operation Manual.

6. Perform a feed correction.

• Correct the feeding rate of media.

• For details, refer to P.2-23 to 24 of RICOH Pro L4130/L4160 Operation Manual.

7. Perform a test dot position correction.

• Correct the ink drop position.

• For details, refer to P.2-25 to 26 of RICOH Pro L4130/L4160 Operation Manual.

USB cable

Power switch

Height-adjusting lever

- 4 -

Prepare the RICOH Software RIP

Check that the attached software RIP [RICOH Software RIP] is prepared.

1. Check if the attached RICOH Software RIP is installed.

• If it is installed, the icon on the right is displayed on the PC desktop.

• For the installation, refer to Installation Guide of the attached

RICOH Software RIP.

2. Check the connection with RICOH Pro L4130/L4160.

(1) Is the power supply of RICOH Pro L4130/L4160 turned ON?

(2) Is the PC in whichthe attached RICOH Software RIP is installed connected with RICOH Pro

L4130/L4160?

3. Register the printer in the attached RICOH Software RIP.

• For print in RICOH Pro L4130/L4160, the registration of the printer into the attached RICOH

Software RIP is required.

• If you have already registered a printer, you can skip this step. Proceed to "Perform printing".

(1) Double click to start the RICOH Software RIP.

• The main window of the RICOH Software RIP is displayed.

• If no printer is registered, the [Printer Management...] window appears. In this case, pro-

ceed to step (3).

(2) From the menu, select [Environments], and then

[Printer Management...].

• The [Printer Management...] window appears.

(3) Click [Add].

• The [Printer setting]window appears.

(4) Set the printer information.

(The setup procedure described below assumes

that RICOH Pro L4160 is connected. Set the

printer information in the following order:)

• Output Port : USB2.0

• Available Printers : Select Pro L4160.

• Model : RICOHProL4000

• Color : Select depending on the

device.

• Printer Name : Enter "4160".

(For an ink set, the information retrieved from

the printer is displayed.)

(5) Click [OK].

• The confirmation screen is displayed.

Clicking [OK] starts the registration of the

printer.

• The [Do you create the hot folder and printer

driver?] confirmation window appears. If you

want to create them, click [Yes]. (You can also

create them at a later time.)

- 5 -

Perform printing

Here, the printing method using a sample image included in the CD of the JV 34 Operation Manual.

1. Double-click to start the attached RICOH Software RIP.

• The main window of the attached RICOH Software RIP is displayed.

2. Set the CD of RICOH Pro L4130/L4160

Operation Manual into the disk drive.

3. Click [Print Guide / Sample data].

• The “Print Guide and Sample Data” dialog is dis-

played.

4. To select the data you want to print from the RICOH Software RIP, select

[File], and then [Open] from the menu.

• The “Select file name to print” window appears.

5. Select the file to be printed, and click [Open].

• If more than one printer is registered, select [ProL4160] from [Printer Name].

• For details on the Favorites setting, see the RICOH Software RIP Reference Guide.

• The file is loaded. The loaded file is displayed on the [ProL4160] tab in the main window.

• Check P. 2 t o P. 4 “ F i r s t , c o n f irm the following items:” without fail before creating a seal/a

sticker.

- 6 -

6. Select the file loaded into the [ProL4160] tab.

7. To check or edit the settings, from [Function icons] displayed in the

right side of the window, select the icons shown below.

• For details about each function icon, see the attached RICOH Software RIP Reference Guide.

(1) To specify the enlargement, reduction, or copy setting, select (General Print).

(2) To select a profile that matches the medium or ink set installed in RICOH Pro L4130/4160,

select (Quality).

8. To print a file, select (Execution) from the [Function icons] displayed

in the right side of the window.

(1) Select [RIP & Print] or [Immediate Print].

(2) Click [Start].

• If you have replaced a medium in RICOH Pro L4130/4160, perform the following steps to

acquire the width of the medium from the printer.

1. In the media window,

select the [ProL4160]

tab.

2. In the [Printer] section,

click .

- 7 -

Typical questions

The answers to the questions/ the troubles frequently asked by the customer are provided.

About errors

“Replace a WIPER” is displayed

Check the wiper and if there are any scratches at the apical end of the wiper film, replace the wiper by

following the Chapter 4 “Replacing the wiper” of the OPERATION MANUAL.

“WASTE TANK” is displayed

The waste ink tank is nearly full. Replace the waste ink tank by following the procedures in Chapter4 “If a

Waste Ink Tank Confirmation Message Appears” of the OPERATION MANUAL. (Even if you replace

the waste ink tank, the display does not disappear.)

Supplied items

Purchase them in a distributor in your district or our office.

Name of part Specifications Part codes Remarks

Pro Wiper kit Type A Including 10 841906

Pro Waste Ink Bottle Type A One 841907

Pro Cutter Blade Type A One 841908

Pro Absorbent Sponge kit Type A 3 set 841910

Pro Flushing Cartridge Type A 220ml

For North America ：

841971

For Europe ：841974

Dedicated for rear

surface set of main

body

Pro Maintenance kit Type A 200ml

For North America ：

841970

For Europe ：841973

Pro Filter kit Type A 841912

EN GB EN US EN AU M153-7571

Autres manuels pour Pro L4130

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ricoh Imprimante

Ricoh

Ricoh M001 Manuel utilisateur

Ricoh

Ricoh Aficio SP C430DN Manuel utilisateur

Ricoh

Ricoh Aficio AP600LU Manuel utilisateur

Ricoh

Ricoh 403079 - Aficio SP C410DN-KP Color Laser... Manuel utilisateur

Ricoh

Ricoh PRO C7200 Guide d'installation

Ricoh

Ricoh Pro 8100S Manuel utilisateur

Ricoh

Ricoh SP C261SFNw Manuel utilisateur

Ricoh

Ricoh Aficio GX7000 Manuel utilisateur

Ricoh

Ricoh PRO C7200S Mode d'emploi

Ricoh

Ricoh SP4100N - Aficio SP B/W Laser Printer Manuel utilisateur

Ricoh

Ricoh Aficio 480W Instructions d'installation et d'entretien

Ricoh

Ricoh Pro 8300 Series Guide d'installation

Ricoh

Ricoh SP C440dn Manuel utilisateur

Ricoh

Ricoh G-P1 Manuel de service

Ricoh

Ricoh Aficio CL3000 Manuel utilisateur

Ricoh

Ricoh Aficio AP400N Manuel du propriétaire

Ricoh

Ricoh StreamPunch Pro Guide de l'administrateur

Ricoh

Ricoh FW780 Manuel utilisateur

Ricoh

Ricoh 5100N - Aficio SP B/W Laser Printer Manuel utilisateur

Ricoh

Ricoh GX7000 SubliJet R Manuel utilisateur

Ricoh

Ricoh Aficio SP 100SF Manuel utilisateur

Ricoh

Ricoh Aficio GX3000 Manuel utilisateur

Ricoh

Ricoh SP 112SU Manuel utilisateur

Ricoh

Ricoh Ri 100 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur