Ricoh FW770 Manuel utilisateur

FW740

Operating Instructions

RICOH

Power Source: 220 V, 230 V, 240 V, 50 Hz, more than 7 A

Please make sure to connect the power cord to a power source as

above. For details about power source, see page 43.

Power Consumption: 1.4 kW

BESCHEINIGUNG DES HERSTELLERS/IMPORTEURS

Hiermit wird bestätigt, daß der/die/das

RICOH FW740

(Gerät, Typ, Bezeichnung) In Übereinstimmung mit den Bestimmun-

gen der

163, Verfügung 1046/1984

(Amtsblattverfügung) funkenstört ist.

Der Deutschen Bundespost wurde das Inverkehrbringen dieses

Gerätes angezeigt und die Berechtigung zur Überprüfung der Serie

auf Einhaltung der Bestimmungen eingeräumt.

RICOH COMPANY, LTD. (Name des Herstellers/Importeurs)

For good copy quality, Ricoh recommends that you use genuine

Ricoh toner.

Ricoh shall not be responsible for any damage or expense that may

result from the use of parts other than genuine Ricoh parts in your

Ricoh office product.

In accordance with ISO Standard 7001, this machine uses the follow-

ing symbols for the main switch:

means POWER ON.

means POWER OFF.

means STAND BY

Note: Some illustrations may be slightly different from your machine.

Overseas Affiliates

U.S.A.

RICOH CORPORATION

5 Dedrick Place

West Caldwell, New Jersey 07006

(TEL) 201-882-2000

Netherlands

RICOH EUROPE B.V.

Groenelaan 3 P.O. Box 114

1180 AC - Amstelveen Holland

(TEL) 020-5474111

United Kingdom

RICOH U.K. LTD.

Ricoh House

1 Plane Tree Crescent, Feltham,

Middlesex, TW13 7HG

(TEL) 081-751-6611

Germany

RICOH DEUTSCHLAND GMBH

Mergenthalerallee 38-40,

65760 Eschborn

(TEL) (06196) 906-0

France

RICOH FRANCE S.A.

383 Avenue de General de Gaulle,

B.P. 307, 92143 Clamart Cedex

(TEL) 01- 4094-3838

Spain

RICOH ESPAÑA S.A.

Guitard, 45

08014 Barcelona

(TEL) 490-09-60

Italy

RICOH ITALIA S.p.A.

Via della Metallurgia, 12

(zona Basson) - 37139 VERONA

(TEL) 045-851 00 44

Hong Kong

RICOH BUSINESS MACHINES,

LTD.

23/F., China Overseas Building,

139, Hennessy Road,Wan Chai,

SAFETY INFORMATION

Safety During Operation

We’veidentifiedallsafetymessagesinthismanualwiththewords

warn-

ing

and

caution

. These words mean the following.

WARNING: Important information to alert you to a situation that might

cause serious injury and damage to your property if instructions are not

followed properly.

Caution: Important information that tells how to prevent damage to your

equipment, or how to avoid a situation that might cause minor injury.

WARNINGS

Since some parts of the copier are supplied with high electrical

voltage, touch only the parts specified in this manual.

Donotmodifyorreplaceanypartsotherthantheonesspecified

in this manual.

Do not incinerate toner or tonercontainers. Toner dustcould ig-

nite when exposed to open flames.

Do not store toner where it will be exposed to heat.

Do not eat or swallow toner, and keep itout of reach of children.

The fusing unit may be very hot. Be careful when handling it.

Whenmovingthecopieracrosstheroom,pushthecopiertable,

not the copier itself.

Cautions

While copying, do not turn off the main switch.

While copying, do not open orclose theoriginal table, the upper

unit, or any of the covers.

While copying, do not unplug the power cord.

Keep corrosive liquids, such as acid, off the machine.

Do not allow paper clips, staples, or othersmall metallic objects

to fall inside the machine.

General Safety Information

Always turn the copier off when you’ve finished copying for the

day, but leave it plugged in.

When the copier will not be used for a long period, disconnect

the power cord.

Ifthecopiermustbetransportedbyvehicle,pleasecontactyour

service representative.

This copier can only be installed by a qualified service repre-

sentrative.

When the copier is plugged in and the main switch is in the

Stand-by position, the anti-condensation heaters are on. In

case of an emergency, unplug the copier’s power cord.

COPYING

Making One Copy

To make a copy, you should first open the lower table of the copier (the

copy table); then pull out the original guides at the exit; place the copy

paper on the copy table; and last of all set the original on the top table of

the copier (the original table). When you’ve set the original, the copier

will take it in. Follow the steps below.

CAUTION: If during copying your original gets stuck in the copier,

press the Emergency Stop key .

1. Open the copy paper table.

2. Open the original guides but do

not force them.

3. If you want, set the image density

(page 7) and the leading edge

margin (page 8) or change the

copymediasetting(page13).

4. Set the copy and original guides

(option) on the copy table to

match the size of your copy pa-

per and your original.

* Original guides are shown closed

to keep illustrations clear.

5. WaituntiltheSetPaper indicator

lights up on the operation panel.

6. Place the sheet of copy paper on

the copy table. Slide the paper

straight into the copier until it stops.

The copier will soon pull it in. Once

the paper is set, the beeper will

sound.

7. Wait until the Set Original indi-

cator lights up on the operation

panel.

8. Center your original face up on

the original table. Slide the origi-

nal straight into the copier until

the copier pulls it in.

COPYING Making One Copy

9. The original comes out from the

opening just under the original

table

.Thecopyisdeliveredfrom

theslotontopofthecopier



About the original guides...

The original guides you pulled out at the exit keep the original from going

into the copy paper entrance. Always use the original guides with originals

thinner than 0.1 mm, with very long originals, or with very curly originals.

When sliding the original into the copier...

When inserting the original in the copier, slide it in carefully, but quickly.

Otherwise, the original might skew as it goes through the machine.



Making One Copy COPYING

Copying With The Roll Feeder

To make a copy using the roll feeder option, you do not need to set pa-

per on the copy table; the paper will be fed to the copier from the roll

feeder. You should first input the paper length and other settings, then

press the RF Select key , and lastly place the original on the top ta-

ble (the original table). Follow the procedure below.

1. Setthe originalguides(option)to

match the size of your original.

2. Follow the key strokes below.

If you want to change the size, press

the +and -keys until the size you want

appears in the display.

Press the Preset Cut key to choose a

paper length. The length appears in the

display, in millimeters.

If you want, set the image density

(page 7) and the leading edge mar-

gin (page 8) or change the copy me-

dia setting(page 13).

Press the Function Select key until

thearrowpointsatPaperLength.

COPYING Copying With The Roll Feeder

3. When the RF Select indicator

lightsuponthepanel,presstheRF

Select key. The roll feeder starts.

Once the copier has set the copy

paper,thebeeperwillsound.

4. Wait until the Set Original indi-

cator lights up on the operation

panel.

5. Place your original face up on

the original table. Slide the origi-

nal straight into the copier until

the copier pulls it in.

6. The original comes out from the

opening just under the original

table

.Thecopyisdeliveredfrom

theslotontopofthecopier



¬

Copying With The Roll Feeder COPYING

Autres manuels pour FW770

Table des matières

Autres manuels Ricoh Imprimante

Ricoh

Ricoh SP 210 Manuel utilisateur

Ricoh

Ricoh Pro L5130 Instructions originales

Ricoh

Ricoh InfoPrint 1622 Express Manuel utilisateur

Ricoh

Ricoh SP 311SFNw Manuel utilisateur

Ricoh

Ricoh Lanier AP206 Manuel utilisateur

Ricoh

Ricoh AP1400/AP2000 Manuel utilisateur

Ricoh

Ricoh 2238 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

Ricoh

Ricoh Aficio MP C4501 Manuel utilisateur

Ricoh

Ricoh P C311W Manuel utilisateur

Ricoh

Ricoh L5160 Guide d'installation

Ricoh

Ricoh Pro C9200 Manuel utilisateur

Ricoh

Ricoh G190 Manuel utilisateur

Ricoh

Ricoh AP610N - Aficio B/W Laser Printer Manuel utilisateur

Ricoh

Ricoh Ri 100 Manuel utilisateur

Ricoh

Ricoh DDP 184 Manuel utilisateur

Ricoh

Ricoh Aficio SP C232DN Guide de démarrage rapide

Ricoh

Ricoh MET-C2yz Manuel de service

Ricoh

Ricoh Ri 4000 Manuel utilisateur

Ricoh

Ricoh MP C306 series Manuel utilisateur

Ricoh

Ricoh Pro C900 Instructions d'installation et d'utilisation

Ricoh

Ricoh Aficio SP C320DN Instructions d'installation

Ricoh

Ricoh MP C6502SP Guide de démarrage rapide

Ricoh

Ricoh G112 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur