Ricoh G1398501 Manuel utilisateur

Setup Guide

Read This First

Trademarks.............................................................................................................3

Safety Information .................................................................................................4

Positions of RWARNING and RCAUTION labels ..............................................8

ENERGY STAR Program .......................................................................................9

How to Read This Manual ...................................................................................10

Guide to the Printer

Exterior: Front View.............................................................................................11

Exterior: Rear View ..............................................................................................12

Inside.....................................................................................................................14

Control Panel........................................................................................................15

Setting Up

Where to Put the Printer......................................................................................17

Checking the Contents of the Box .....................................................................20

Unpacking.............................................................................................................22

Installing the Waste Toner Bottle and Photo Conductor Unit .........................23

Installing the Toner Cartridge.............................................................................29

Loading Paper ......................................................................................................33

Turning the Power On .........................................................................................36

Selecting the Display Language.........................................................................38

Test Printing .........................................................................................................40

Adjusting the Image Density...............................................................................42

Installing Options

Available Options.................................................................................................44

Option List ................................................................................................................44

Option Installation Flow Chart ..................................................................................45

Installing Options......................................................................................................46

Attaching Paper Feed Unit Type 3000................................................................48

Attaching AD440 (Duplex Unit)...........................................................................53

Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM

Module) ...............................................................................................................56

Attaching Printer Hard Disk Type 3000..............................................................61

Formatting the Printer Hard Disk..............................................................................65

Attaching User Account Enhance Unit Type E .................................................67

Attaching IEEE 1394 Interface Board Type B....................................................71

Attaching IEEE 802.11b Interface Unit Type H ..................................................74

Attaching Bluetooth Interface Unit Type 3245 ..................................................78

Attaching IEEE 1284 Interface Board Type A....................................................82

Attaching Network Data Protection Unit Type C...............................................84

Connecting the Printer

Network Connection ............................................................................................86

USB Connection...................................................................................................88

Parallel Connection .............................................................................................89

IEEE 1394 Connection .........................................................................................90

Configuration

Ethernet Configuration........................................................................................91

IEEE 802.11b (Wireless LAN) Configuration .....................................................96

IEEE 1394 Configuration ...................................................................................102

IP over 1394...........................................................................................................102

SCSI print...............................................................................................................104

Installing the Printer Driver

Quick Install........................................................................................................106

Install the Operating Instructions.....................................................................108

Read This First

Trademarks

Microsoft, Windows and Windows NT are registered trademarks of Microsoft

Corporation in the United States and/or other countries.

Bluetooth®is a registered trademark of the Bluetooth SIG, Inc. worldwide.

Other product names used herein are for identification purposes only and might

be trademarks of their respective companies. We disclaim any and all rights to

those marks.

The proper names of the Windows operating systems are as follows:

•Microsoft

®Windows®95 operating system

•Microsoft

®Windows®98 operating system

•Microsoft

®Windows®Millennium Edition (Windows Me)

• The product names of Windows®2000 are as follows:

Microsoft®Windows®2000 Advanced Server

Microsoft®Windows®2000 Server

Microsoft®Windows®2000 Professional

• The product names of Windows®XP are as follows:

Microsoft®Windows®XP Professional

Microsoft®Windows®XP Home Edition

• The product names of Windows ServerTM 2003 are as follows:

Microsoft®Windows ServerTM 2003 Standard Edition

Microsoft®Windows ServerTM 2003 Enterprise Edition

Microsoft®Windows ServerTM 2003 Web Edition

• The product names of Windows NT®4.0 are as follows:

Microsoft®Windows NT®Server 4.0

Microsoft®Windows NT®Workstation 4.0

Read This First

Safety Information

When using your printer, the following safety precautions should always be fol-

lowed.

In this manual, the following important symbols are used:

Indicates a potentially hazardous situation which, if instructions are not followed, could result in

death or serious injury.

Indicates a potentially hazardous situation which, if instructions are not followed, may result in

minor or moderate injury or damage to property.

Read This First

•Confirm the wall outlet is near the machine and freely accessible, so

that in the event of emergency, it can be unplugged easily.

•Plug and unplug the power cable with dry hands, or an electric shock

could occur.

•Only connect the machine to the power source described in the man-

ual.

•Avoid multi-wiring.

•Do not damage, break or make any modifications to the power cord.

Do not place heavy objects on it, pull it hard or bend it more than nec-

essary. These actions could cause an electric shock or fire.

•Do not incinerate spilled toner or used toner. Toner dust is flammable

and might ignite when exposed to an open flame.

•Disposal should take place at an authorized dealer or an appropriate

collection site.

•If you dispose of the used toner containers yourself, dispose of them

according to local regulations.

•Dispose at an authorized dealer or approved collection site. If you dis-

pose of the used toner containers yourself, do so according to local

regulations.

•Do not risk electric shock by handling the power cord or plug with wet

hands.

•Do not take apart or attempt any modifications to this machine. There

is a risk of fire, electric shock, explosion or loss of sight. If the ma-

chine has laser systems, there is a risk of serious eye damage.

•The supplied power cord is for use with this equipment only. Do not

use with other appliances. Doing so may result in fire, electric shock,

or injury.

•Keep the machine away from flammable liquids, gases, and aerosols.

A fire or an electric shock might occur.

Read This First

•Place no objects on the right cover.

•Do not pull out the paper tray forcefully. If you do, the tray might fall and

cause an injury.

•The inside of this printer becomes very hot. Do not touch parts labelled “v”

(indicating a hot surface). Touching these parts will result in burns.

•Do not handle the plug with wet hands. Doing so might cause an electrical

shock.

•Keep the machine in an area that is within optimum environmental condi-

tions. Operating the machine in an environment that is outside the recom-

mended ranges of humidity and temperature can cause an electrical fire

hazard. Keep the area around the socket free of dust. Accumulated dust

can become an electrical fire hazard.

•Place the machine on a strong and level surface. Otherwise, it might fall and

injure someone.

•If toner or used toner is inhaled, gargle with plenty of water and move into

a fresh air environment. Consult a doctor if necessary.

•If your skin comes into contact with toner or used toner, wash the affected

area thoroughly with soap and water.

•If toner or used toner gets into your eyes, flush immediately with large

amounts of water. Consult a doctor if necessary.

•If toner or used toner is swallowed, dilute by drinking a large amount of wa-

ter. Consult a doctor if necessary

•Avoid getting toner on your clothes or skin when removing a paper jam or

replacing toner. If your skin comes into contact with toner, wash the affected

area thoroughly with soap and water.

•If toner gets on your clothing, wash with cold water. Hot water will set the

toner into the fabric and may make removing the stain impossible.

•Keep toner (used or unused) and the toner bottle out of reach of children.

•Grip the plug, not the cord, when pulling the plug from the socket. Pulling

the cord causes wear and tear that can result in fire or electric shock.

•Wait at least one hour after power off before replacing parts. Not allowing

the printer to cool may result in burns.

•Lifting the paper feed unit carelessly or dropping it may cause injury.

Read This First

❒Under certain temperature and humidity conditions, printing may cause va-

pour to issue from paper. The standard tray (behind the control panel) may

emit steam during printing.

❒Our products are engineered to meet the highest standards of quality and

functionality. When purchasing expendable supplies, we recommend using

only those specified by an authorized dealer.

❒Rating voltage of the connector for options: Max. DC 24 V.

❒Voltage must not fluctuate more than 10%.

•When removing misfed paper, do not touch the fusing unit because it could

be very hot.

•The printer weights approximately 32 kg (70.5 lb.). When moving the print-

er, use the inset grips on both sides, and lift slowly. The printer will break or

cause injury if dropped.

•Before installing options, the machine should be turned off and unplugged

for at least half an hour. Components inside the machine become very hot,

and can cause a burn if touched.

•Lifting the paper feed unit carelessly or dropping it may cause an injury.

•Do not touch the inside of the controller board compartment. It may cause

a machine malfunction or a burn.

•When moving the machine, each person should hold the handles that are

located on opposite sides, and then lift it slowly. Lifting it carelessly or drop-

ping it may cause an injury.

•When you move the printer, remember to unplug the power cord from the

wall outlet to avoid a fire or an electric shock.

•When moving the printer after use, do not take out any of the Toners, Photo

Conductor Units, nor the Waste Toner Cartridge to prevent toner spill inside

the machine.

•When lifting the machine, use the inset grips on both sides. Otherwise the

printer could break or cause an injury if dropped.

•Before moving the machine, unplug the power cord from the wall outlet. If

the cord is unplugged abruptly, it could become damaged. Damaged plugs

or cords can cause an electrical or fire hazard.

Read This First

Positions of RWARNING and RCAUTION

labels

This machine has labels for RWARNING and RCAUTION at the positions

shown below. For safety, please follow the instructions and handle the machine

as indicated.

High temperature parts. Turn off the main power and be careful when replac-

ing fusing unit / removing misfed paper.

The inside of this printer becomes very hot. Do not touch parts labelled “v”

(indicating a hot surface). Touching these parts will result in burns.

The inside of this printer becomes very hot. Do not touch parts labelled “v”

(indicating a hot surface). Touching these parts will result in burns.

Do not incinerate toner or toner containers. Toner dust may cause flashback

when exposed to an open flame.

Read This First

ENERGY STAR Program

❖Low-power Mode (Energy Saver mode)

This printer automatically lowers its power consumption 1 minutes after the

last operation has been completed. To exit Low-power (Energy Saver) mode,

press any key on the control panel. For more information about how to con-

figure Energy Saver mode, see “Making Printer Settings with Control Panel”,

Software Guide as a HTML file on the CD-ROM.

❖Specifications

As an ENERGY STAR Partner, we have deter-

mined that this machine model meets the EN-

ERGY STAR Guidelines for energy efficiency.

The ENERGY STAR Guidelines intend to establish an international energy-saving system for

developing and introducing energy-efficient office equipment to deal with environmental issues,

such as global warming.

When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall

place the ENERGY STAR logo onto the machine model.

This product was designed to reduce the environmental impact associated with office equip-

ment by means of energy-saving features, such as Low-power mode.

Energy Saver mode Power Consumption 10 W or less

Default Time 1 minutes

Recovery Time 3 seconds or less

Read This First

How to Read This Manual

The following set of symbols is used in this manual.

This symbol indicates a potentially hazardous situation that might result in death

or serious injury when you misuse the machine without following the instructions

under this symbol. Be sure to read the instructions, all of which are described in

the Safety Information section.

This symbol indicates a potentially hazardous situation that might result in minor

or moderate injury or property damage that does not involve personal injury

when you misuse the machine without following the instructions under this sym-

bol. Be sure to read the instructions, all of which are described in the Safety In-

formation section.

* The statements above are notes for your safety.

If this instruction is not followed, paper might be misfed, originals might be dam-

aged, or data might be lost. Be sure to read this.

This symbol indicates information or preparations required prior to operating.

This symbol indicates precautions for operation, or actions to take after abnormal

operation.

This symbol indicates numerical limits, functions that cannot be used together,

or conditions in which a particular function cannot be used.

This symbol indicates a reference.

[]

Keys that appear on the machine's display.

Keys and buttons that appear on the computer's display.

{}

Keys built into the machine's control panel.

Keys on the computer's keyboard.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ricoh Imprimante

Ricoh

Ricoh Neptune-P1 Manuel utilisateur

Ricoh

Ricoh IM CW2200 Manuel utilisateur

Ricoh

Ricoh DDP 184 Manuel utilisateur

Ricoh

Ricoh IM C300 Manuel utilisateur

Ricoh

Ricoh Ri 4000 Manuel utilisateur

Ricoh

Ricoh Aficio GX7000 Manuel utilisateur

Ricoh

Ricoh Aficio 2105 Instructions d'installation et d'entretien

Ricoh

Ricoh SH-P1 M020 Guide de démarrage rapide

Ricoh

Ricoh C410DN - Aficio SP Color Laser Printer Manuel utilisateur

Ricoh

Ricoh S-C4.5 Guide de démarrage rapide

Ricoh

Ricoh LCIT RT5130 Guide de démarrage rapide

Ricoh

Ricoh FAX2700L Manuel utilisateur

Ricoh

Ricoh C125 P Manuel utilisateur

Ricoh

Ricoh C220N - Aficio SP Color Laser Printer Manuel utilisateur

Ricoh

Ricoh B234 Manuel utilisateur

Ricoh

Ricoh Aficio SP C431DN-HS Manuel utilisateur

Ricoh

Ricoh SP 212 SFNw Manuel utilisateur

Ricoh

Ricoh Aficio SP C430DN Manuel utilisateur

Ricoh

Ricoh AficioSP C410DN Instructions d'installation

Ricoh

Ricoh Aficio GX7000 Manuel utilisateur

Ricoh

Ricoh SP 150w Manuel d'instructions

Ricoh

Ricoh SP 8400DN Manuel utilisateur

Ricoh

Ricoh PRIPORT VT1730 Manuel utilisateur

Ricoh

Ricoh 403080 - Aficio SP 4100N-KP B/W Laser... Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur