Renesas RX65N Series Manuel utilisateur

Quick Start Guide Renesas RX65N Cloud Kit

Note: The steps described in this document were correct at the time of this document was created and may have

changed at the time of reading.

This documentdescribes how to install and run the AWS cloud connectivity demo on Renesas RX65N Cloud Kit and

visualize the sensor data onthe webdashboard.

What you need to get started:

1. Prepare Renesas RX65N Cloud Kit (www.renesas.com/rx65n-cloud)

2. Register AWS account (https://aws.amazon.com)

3. Register Renesas web dashboard account (https://cloud.renesasrx.com/accounts/register#)

4. Write the sample program if your board is re-flashed from the default

(https://www.renesas.com/search/keyword-search.html#q=R01QS0035EU)

5. Prepare Wi-Fi Internet access environment

1. Register AWS Account

1. Create an AWS account by going to portal: https://portal.aws.amazon.com/billing/signup#/start

2. After login, go to your account name in upper right-handcornerand click on “My Security Credentials”.

3. If the below window pops up, click on “Continue to Security Credentials”.

R12QS0036EJ0101

4. Click on “Access keys (access key ID and secret access key)”.

5. Click on “Create New AccessKey” and ‘Download KeyFile”. Make anote ofthe “Access Key ID’ and “Secret

Access Key”. This information will be required in Step 7.

2. Register Web Dashboard Account and Create an IoT Thing

6. Create a web dashboard account at https://cloud.renesasrx.com

7. After login, go to “Setting”and enter the cloud provider configuration byentering the “AWS Access Key”and “AWS

Secret Key” noted in the Step 5. Make sure to select “AWS IoTCore Region” same as AWS account. Click “Save”.

This will provision the dashboard for the AWS access.

8. Click on “Register a newdevice” and Enter any name under “Device Name” and then click “Create”.

9. A new window will pop up with the device name and security credentials. Make anote ofall the dataor savethe

webpage for later reference. Don’t close this windowuntil kit is provisioned for the credentials as this information is

available only once.

3. Provision the Kit for the AWS Credentials

10. Connectthe cloud kitas below. Make sure Silex Pmod module is connected to Cloud Option Board PMOD

connector CN5.

11. Connect USB cable from CN18 to the PC.

12. Open Terminal program like “Tera Term” and configure it forserialconnectionas 115k baud rate, 8-bit data, no

parity.Make sure to assignthe COMport assigned to the kit.

13. Ensure linkis fitted to EJ2on the Target Board for RX65N for non-debugger operation.

14. Power up the kitby connecting USB cables to TBboard connectorECN1 and Cloudoption board CN6 toPC.

15. If the board ispre-programmed with the demo code and has no Wi-Fi and AWS credential pre-stored, the following

message will appear ontheTerminal window. Skip the steps 16 and 17 and follow the steps thereafter.

16. If the board isprovisioned already with the Wi-Fi and AWS credential, the below message willbe shown on the

terminal.

Cloud Option Board

Silex Pmod Module

Target Board for RX65N

17. If unsure about provisioning data, clickany key to program thenewprovisioning data. Otherwise, if the kit is

provisioned with the correctdata,then wait for the kitto connect to AWS and skip the steps18 to23.

18. Enter Wi-Fi SSID and click enter.

19. Enter Wi-Fi password for the Wi-Fi network chosen in the previous step.

20. Input the device name created in the dashboard in the Step 8 and press enter.

21. Copy and paste the endpoint address from credential window of the dashboard and press enter.

22. Copy and paste the certificate from credential window from the dashboard and press enter.

23. Copy and paste the private key from the dashboard and press enter.

24. Verify the setting. If correct, enter “0” to write the provisioning data in Flash.

25. Wait about 1 minute without inputting anything from the keyboard. If you enter something from the keyboard

here, the SSIDand password entered 1) to 6) will be cleared and you will need to enter it again. After a reset or

when the power is turned on again, it will tryto connectto the cloud with the SSIDand passwordentered

previously. If you change the SSID or password, you can reset itby pressing any key at the step of “Please

press any button to reprovision”. If communication doesnot start in about 1 minute, press RESET_SW and wait

again or check the input information again.

26. If provisioning information is correct then the kit will be connected to AWS now, and will be ready to post the

sensor data on AWS cloud and dashboard.

4. Visualize Sensor Data on the dashboard

27. Go back to Dashboard and close the credential window.

28. Click on “Device”. Click “View” button to see the sensordashboard.

29. The dashboard will openand show the sensor’s value. The sensorvalue will beupdated every 30

seconds.

5. Monitor Sensor data on AWS Console

30. Go back to AWS account. Click on “Services->IoT Core->Manage->Things”.

31. Click on the Things name (Referred as device name) created in the dashboard (step 8).

32. Click on Shadowto monitor sensor data.

6. Next Step

After you have completed quick start procedure, review hardware detail of the kit. The hardware detail can be found

in the user’s manual of the Target Board for RX65N and Cloud Option Board user’s manual.

7. User Manuals

The user manuals for this kit is available at: www.renesas.com/rx65n-cloud

RX65N Group User's Manuals (R01UH0590EJ0210) is available at: https://www.renesas.com/RX65N

8. Support

Online technical support and information is available at: https://en-support.renesas.com/dashboard

Technical Contact Details: https://www.renesas.com/us/en/support/contact.html

Website: https://www.renesas.com/

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Renesas Electronics:

RTK5RX65N0S00000BE RTK5RX65N0S01000BE

Autres manuels pour RX65N Series

Table des matières

Autres manuels Renesas Microcontrôleur

Renesas

Renesas V850ES/JF3-L Manuel utilisateur

Renesas

Renesas 78K0 Series Manuel utilisateur

Renesas

Renesas RX600 Series Manuel utilisateur

Renesas

Renesas V850ES/IE2 Manuel utilisateur

Renesas

Renesas M16C-Flasher Manuel utilisateur

Renesas

Renesas RH850 Series Instructions d'installation et d'utilisation

Renesas

Renesas RSKRL78G14 Guide de démarrage rapide

Renesas

Renesas DA1459 PRO Devkit Series Manuel utilisateur

Renesas

Renesas DK-S124 Manuel utilisateur

Renesas

Renesas uPD789881 Manuel utilisateur

Renesas

Renesas RA2E2 Series Manuel utilisateur

Renesas

Renesas V850ES/Fx3 Series Manuel utilisateur

Renesas

Renesas EK-RA2E2 Manuel utilisateur

Renesas

Renesas RL78G14 Instructions d'installation et d'utilisation

Renesas

Renesas R-IN32M3 Series Manuel utilisateur

Renesas

Renesas QB-78K0FX1 Manuel utilisateur

Renesas

Renesas RL78 Series Manuel utilisateur

Renesas

Renesas Synergy DK-S7G2 Manuel utilisateur

Renesas

Renesas RX63N Manuel utilisateur

Renesas

Renesas RX Series Manuel utilisateur

Renesas

Renesas RX65N Series Manuel utilisateur

Renesas

Renesas RL78/G23 Manuel utilisateur

Renesas

Renesas 7542 Manuel utilisateur

Renesas

Renesas 78K0/F 2 Series Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur