REED ST-615 Manuel utilisateur

reedinstruments

www com

Pantone 485 & 123

485 = (0/100/100/10)

123 = (0/18/100/0)

Model ST-615

Digital Thermo-Hygrometer

with remote

or integral probe

Instruction

Manual

reedinstruments

www com

Pantone 485 & 123

485 = (0/100/100/10)

123 = (0/18/100/0)

Table Of Contents

Introduction ................................................................................................ 2

Features...................................................................................................... 2

Specications............................................................................................. 3

Meter Descriptions ..................................................................................... 4

Display Descriptions................................................................................... 4

Operation.................................................................................................... 5

Maintenance............................................................................................... 7

Battery Replacement.................................................................................. 7

Introduction

This device measures relative humidity, air temperature (with probe),

plus “K” type thermocouple wide temperature measurements. The large,

easy-to-read backlit LCD includes primary and secondary displays plus

numerous status indicators. Careful use of this meter will provide years of

reliable service.

Features

• Semiconductor sensor for temperature measurements of 0°C to 40°C

and 32°F~104°F plus type-K thermocouple wide temperature measure-

ments of –20.0°C to 1000°C and –4.0°F~1832°F

• Humidity measurement from 0.1%RH to 100.0%RH with 0.1%RH

resolution and fast time response. (The measuring range is from 0% to

100%, but above 98% and below 5% the deviation is not specied.)

• Fast response for Humidity measurement

• Data Hold and MAX Hold function

• Large dual digital LCD display with function indication

reedinstruments

www com

Pantone 485 & 123

485 = (0/100/100/10)

123 = (0/18/100/0)

Specifications

Display: Dual LCD with Backlight and status Indicators

Sensor Type:

1 - Humidity: Precision capacitance sensor

Function Range &

Resolution Accuracy

Humidity 5.0 to 98.0% RH ± 3.5% RH

Temperature (K-type)

(probe accuracy not

included)

-20.0 to 199.9°C ±(3.0% reading + 4°C)

-20 to 1000°C

-4.0 to 199.9°F ±(3.0% reading + 7°F)

-4 to 1832°F

2 - Temperature: Thermistor (probe) and type “K” thermocouple

Response Time: Probe Temperature and

Relative Humidity: 3 minutes

Accuracy note: Accuracy is specied for the following ambient

temperature range: 64 to 82°F (18 to 28°C)

Sampling Rate: 2.5 samples per second

Operating Conditions: 32 to 122°F (0 to 50°C);

< 80% RH non-condensing

Storage Conditions: 14 to 140°F (-10 to 60°C);

<80% RH non-condensing

Power Supply: 9V Battery with auto power off (after 10 minutes)

Dimensions: 5.9 x 2.8 x 1.4” (150 x 72 x 35mm)

Weight: 210g

reedinstruments

www com

Pantone 485 & 123

485 = (0/100/100/10)

123 = (0/18/100/0)

Meter Description

1. “K” type thermocouple input jack

2. Humidity/Air Temperature Probe

3. Temperature measurement reading display

4. Relative Humidity measurement reading display

5. Power ON/OFF button

6. Thermometer measurement buttons (6)

7. Relative Humidity function buttons (2)

8. Backlight function buttons

Display Descriptions

Probe temperature

°F/°C measurement reading

MAX (1) Probe temperature

°F/°C MAX Hold

HOLD (1) Probe temperature

°F/°C Data Hold

% RH

measurement reading

MAX (2) % RH MAX Hold

HOLD (2) % RH Data Hold

LOW battery indicator

reedinstruments

www com

Pantone 485 & 123

485 = (0/100/100/10)

123 = (0/18/100/0)

Operation

Power

Press the button to turn power on or off.

Probe Humidity & air Temperature Measurements

1. Hold the probe in the area to be tested & allow adequate time

for readings to stabilize.

2. Read the Relative Humidity (center of LCD) and

Probe Temperature (top of LCD).

NOTE: Do not immerse the probe in liquid; it is intended

for use in air on

Type- K Thermocouple Temperature Measurements

1. If you wish to measure the temperature in °F, set the function switch to

the °F range. If you wish to measure temperature in °C, set the function

switch to the °C range.

2. Insert the Temperature Probe into the Temperature Socket, making sure

to observe the correct polarity.

3. Touch the Temperature Probe head to the part whose temperature you

wish to measure. Keep the probe touching the part under test until the

reading stabilizes (about 30 seconds).

Read the temperature in the display. The digital reading will indicate the

proper decimal point and value.

WARNING: To avoid electric shock, be sure the thermocouple has

been removed before changing to another measurement function.

reedinstruments

www com

Pantone 485 & 123

485 = (0/100/100/10)

123 = (0/18/100/0)

Automatic Power OFF

To conserve battery life the meter automatically shuts off after 10 minutes.

°C or °F buttons

1. The user can select the Temperature units. Press the °C or °F button at

the center of the meter.

0.1 or 1 buttons

1. 0.1 or 1 Temperature Resolution buttons at the center of the meter

2. The thermometer allows two choices of resolution:

High resolution: 0.1°C or 0.1°F or Low resolution: 1°C or 1°F

Data Hold Buttons

1. Displays can be held (frozen) at any time by pressing the HOLD button.

For Temperature, use the HOLD button on the left. For Relative Humid-

ity, use the HOLD button on the under the button of the meter.

2. Press HOLD again to exit the mode.

MAX Buttons

1. Press the MAX button to display only the highest reading.

For Temperature, use the MAX button on the left. For Relative Humidity,

use the MAX button on the under the button of the meter.

2. Press the MAX button again to exit this mode.

Backlight Display

1. Press the backlight button to turn the display light on.

2. Press the button again to turn it off.

reedinstruments

www com

Pantone 485 & 123

485 = (0/100/100/10)

123 = (0/18/100/0)

Maintenance

Cleaning and storage

1. The meter should be cleaned with a damp cloth and mild detergent

when necessary. Do not use solvents or abrasives.

2. Store the meter in an area with moderate temperature and humidity.

Battery Replacement

The battery symbol appears on the lower right of the LCD when the 9V

battery needs to be replaced. Replace the 9V battery as follows:

1. Turn the meter off and disconnect the air temperature probe.

2. Remove the large at-head screw on the back of the meter to remove

the probe holder.

3. Remove the rubber holster that surrounds the entire meter by pulling it

over the top of the meter.

4. Remove the small Phillips head screw on the back of the meter.

5. Open the battery compartment and replace the 9V battery.

6. Re-assemble the meter before operating.

reedinstruments

www com

Pantone 485 & 123

485 = (0/100/100/10)

123 = (0/18/100/0)

Notes _________________________________________

________________________________________________

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur