Radiopost TS401 Manuel utilisateur
User Manual
for 4 Channel Transmitter
TS401 2.4GHz
2
■General Information
Caution
☞It is prohibited to copy a part of or the whole of this manual.
☞The contents of the manual may change without prior notice.
☞If there are mistakes or missing parts in this manual, please contact us.
☞In some cases, the manufacturer does not take responsibilities for the results which are
brought upon by the customers.
■Compliance Information Statement (for U.S.A.)
This device, trade name Radiopost, model number TS401, complies with part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Thank you for purchasing the Radiopost TS401 2.4GHz. The unique features of
this product are introduced in this manual. Please read the instruction manual
carefully and thoroughly for optimal enjoyment and control.
This RC system operates with a direct connection between the transmitter and
its receiver, using a 2.4GHz digital frequency band. As others transmitters may
use various frequencies or a crystal type FM band, Radiopost‟s TS401 2.4GHz
system is free from interference to respond more quickly and accurately.
Radiopost TS401 2.4GHz is designed for all kinds of RC cars and boats.
Whether it is on-road or off-road, at a pond or lake, Radiopost‟s products are
made for various RC hobbyists. From beginners to experts, Radiopost wishes
you the best as you set forth into the RC world with our specialized products.
▶TS401 2.4GHz is a high powered RC system. Please check the maximum
coverage distance and operation range for your safety.
▶The 2.4GHz is an ISM band that can be used for devices or equipments
other than RC hobby models. The use of different products in the same
2.4GHz bandwidth may cause frequency interferences among the products.
So, before you start, check to see if the servos move properly and other
connections, by performing a test run from the furthest distance possible.
▶As various manufacturers and products may have different 2.4GHz
technology, only the Radiopost receivers bind with the TS401.
3
■Safety
■Precautions & Warnings
▣Precautions in Application, Export and Modification
Before using the TS401 2.4GHz system, please carefully and thoroughly read
this manual in order to use your RC system safely.
Use this product in a safe manner, observing all safety precautions at all
times.
Please follow and observe all additional rules at the place of operation as
suggested (i.e. race tracks, lakes, etc.) or wherever you use the RC system.
If the RC model is not running properly, please immediately stop all controls.
Do not run the RC model before completely fixing the problems.
The RC model you use may cause injuries or damages. Please always be
careful when running the RC system and models.
Water or moisture may cause malfunctions to the system. Please keep the
RC system away from water and moisture.
For the RC boat, please install the receiver and servo in the waterproof box.
If you are a beginner to the RC hobby, we strongly recommend that you
seek the advice of experts who can assist you or contact your local RC
hobby shop.
▶(Application) Do not use the transmitter for non-RC models. This
product is not designed and intended for use in any application other
than the radio control models for hobby and recreational purposes.
▶(Export precautions) When this product is exported from the country of
manufacturer, its use is to be approved by the laws governing the
country of destination for the devices emitting radio frequency. If this
product is then re-exported to other countries, it may be subject to
restrictions on such export. Prior approval of the appropriate government
authorities may be required. If you have purchased this product from an
exporter outside your country and not an authorized Radiopost
4
▣Precautions for the Transmitter
▣Precautions for the Receiver
distributors or dealer in your country, please immediately contact the
seller to determine if such export regulations have been met. Use of this
product with other than models may be restricted by the export and
trade control regulations and an application for export approval must be
submitted.
▶(Modifications, Adjustment and Replacement of Parts) Radiopost is not
responsible for the unauthorized modification, adjustment and
replacement of parts on this product. Any such changes may void any
or all warranties associated with this product.
▶To start, first switch on the transmitter and secondly, the receiver.
After using the RC Model, please switch off the receiver first and then
the transmitter. Reversing the order of powering on and off may cause
critical damages to the devices or persons.
▶Please check if the batteries for transmitter and receiver are fully charged
before starting.
▶ The antenna for Radiopost‟s transmitter TS450 2.4GHz is built-in the
product (Internal). The antenna in located underneath the front top
section, above the power switch of the transmitter. Be careful not to
cover this part of transmitter, as it may cause weak signal output if
covered.
▶The receiver antenna is made of coaxial cable that consists of a covered
part and naked wire part. The naked wire is used to receive the radio
wave. Be careful not to bend the naked part of the wire, as it also may
weaken the signal quality of the receiver.
▶An antenna cable is very delicate. Please handle it with care.
▶Do not forcibly pull the antenna cable.
▶Do not cut or link the antenna cable with other wires.
5
▶Do not drive the models on rainy days, on damp or humid days and or at
night. If the product(s) come in contact with water, malfunctions may
occur to the transmitter and the model and may cause the systems be out
of control.
Warning
▶Covered part of the antenna may be slightly made into a smooth curve. But
do not fully bend it repeatedly or too sharply, which may cause unexpected
problems with the antenna.
▶The antenna must be installed in the plastic tube or antenna pipe to stand
upright according to the RC model assembly instruction. It is highly
recommended to mount the antenna of receiver away from the motor, the
battery and the speed controller.
▶If the connector of receiver shakes, an unexpected outcome may occur
during controlling. Please check if the receiver, the servo and the switch
connectors are firmly attached to the model.
▶The receiver is sensitive to vibrations, impacts and humidity. Please take
appropriate measures for the receiver to be kept away vibration,
impact and humidity. If not, malfunctions or other problems may occur.
▶When mounting the receiver, avoid any contact with carbon or metal chassis.
▶The contact between metal components mounted on the product may
cause electrical noise and may cause malfunctions and decrease the
receiver‟s performance.
▶The manufacturer is not responsible for the damages caused by the use of
parts other than Radiopost‟s genuine components.
▶Use five AA-size dry cell batteries, five AA-size rechargeable batteries, or its
equivalents only. Batteries other than specified above may cause serious
damages on your TS401. Misuse of battery may void warranty.
Warning
6
■General Information
■Safety
■Precautions & Warnings
1. Before Using
1.1 Features
1.2 Parts and Accessories
1.3 Nomenclature
1.4 Welcome Screen
1.4.1 Vertical View
1.4.2 Horizontal View
2. Personal Adaptation
2.1 How to Remove and Attach the Adapter for Wheel Extension
2.2 How to Change the Wheel Angle
2.3 How to Change the Wheel Position for the Left-handed Use
3. Functions and Description of Buttons
3.1 Edit Buttons
3.2 Trim Buttons
3.3 Dial Buttons
3.4 Push Switches
4. Function Map (Quick Menu/All Menu)
4.1 Quick Menu
4.2 All Menu
5. Description of Functions
5.1 Model
5.1.1 Model Select
5.1.2 Model Name
5.1.3 Model Copy
5.1.4 Model Reset
5.2 Subtrim
5.3 Dual Rate
5.4 EPA 1
5.5 EPA 2
5.6 Exponential
5.6.1 Steer Exponential
5.6.2 Throttle EXP
Table of Contents
7
5.7 Reverse
5.8 Bind Receiver
5.9 Selection of Switch
5.9.1 Push Switch
5.9.2 Dial Switch
5.9.3 Trim Switch
5.10 Speed
5.10.1 Steer Speed
5.10.2 Throttle Speed
5.11 Brake
5.12 Monitor
5.13 Adjust
5.14 Timer
5.15 LAP List
5.16 Edit Banner
5.17 System
5.18 Advanced
5.18.1 Throttle Mode
5.18.2 ABS
5.18.3 TH-Acceleration
5.18.4 AT-Start
5.18.5 Idle-Up
5.18.6 ATL
5.18.7 AUX CH Position
5.18.8 Boat Mode
5.18.9 Prog Mix
■Troubleshooting Guide
■Abbreviation
■Warranty
■Contact
8
1.1 Features
1. Before Using
▣2.4GHz radio communication system
Frequency channel setting unnecessary and channel shifting takes place
within the 2.4GHz band automatically. This system minimizes the
interference from other 2.4GHz systems by using DSSS that has high
signal transmission rate.
▣Model memory for 20 models
The model names can use letters, numbers and symbols so that logical
names may be used.
▣Two menu mode
The menu is consist of 2 sub-menus – Quick menu and 8 Icons‟ menu –
so that quickly and easily call the functions.
▣Brake Mixing
Brake mixing of the front and rear wheels can be adjusted independently.
▣A.B.S system
A.B,S function applies the brakes that gasoline engine cars do not lose
their grip on the road even when braking at corners.
▣ACCEL
Gasoline engine cars have a time lag before the clutch and brakes
become effective. The ACCEL function reduces this time lag.
▣Throttle speed
Sudden trigger operation on a slippery road surface will cause the wheel
to spin and the model not to accelerate smoothly. By using the throttle
speed function, operation can be performed smoothly and easily. It also
suppresses battery consumption.
▣Left-handed support
The left and right installation direction of the wheel section can be
reversed.
9
▣Racing timer
The racing timer can record total time and average lap time.
The race time and audible alarm can be set.
▣Tension adjustment function
The tension of the steering wheel & throttle trigger springs can be
adjusted from the outside.
▣Color LCD
LCD can be adjusted with favorite color among blue, brown, green
and background can be adjusted black or white.
▣Rubber grip handle
Rubber grip handle is designed for comfortable grip and control.
▣Internal antenna
The built-in antenna is applied for the convenience to carry around and
cannot be broken.
10
1.2 Parts and Accessories
No.
Name
Description
Q’ty
Remarks
1
TS401 Transmitter
4Ch. Surface Transmitter
1
2
RP24RS5D Receiver
5Ch. Receiver
2
3
Battery Holder
Holder for AA Battery
1
4
Wheel Holder
Holder for Wheel Set
1
5
Wire
Wire Used with Wheel Set
1
6
Screw
Screws for Wheel Holder
4
7
Hex Wrench
Used for Personal
Adaptation
1
8
User Manual
User Guide for TS401
1
Transmitter
User Manual
Battery Holder
1.5 mm
Hex Wrench
5Ch.
Receivers
Wheel Holder
Wire Screws for
Wheel Holder
Table des matières
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
