Quantum SNC 5100 Mode d’emploi

Release Notes

6-00997-10 Rev A

ADIC, Scalar, and SNC are registered trademarks of Advanced Digital Information

Corporation. All other product, company, or service names mentioned herein are the property

of their respective owners.

Product: SNC® 5100 Firmware v4.45.18

Date: May 2006

Contents

Purpose of this Release

This release provides Firmware v4.45.18 for the SNC 5100. The SNC 5100 is used with the Scalar® 1000

and the Scalar 10K.

Resolved Issues

This release of Firmware v4.45.18 is based on Firmware 4.45.17. Issues resolved by Firmware 4.45.18

include the following:

Page Topic

1 Purpose of this Release

1 Resolved Issues

4 Documentation

Change

Request

Number

Description

56424 SNC does not return Reservation Conflict on Mode Sense command.

56886 Host loses SNC and drives after cable pull test.

57118 SNC 5101 in LIP Login loop with 4.45.18 build 1 does not work correctly.

4.45.17

55738 Upgrade QLogic Microcode to 3.03.19

55193 SDLT320 Bug Check causes SNC to hang.

54527 SNC 510X incorrectly identifies GBIC devices.

52968 Watchdog timer required to identify and recover 510x hang.

52257 WRITE command with zero transfer length not processed correctly.

2© May 2006, ADIC

50483 Vendor Unique ASC/ASCQ clash with libraries.

50287 QLogic debug dump procedure improvement.

50136 ResultFlags not reported for all cases of scsintTapeWriteCDBSent

48777 HPUX ioscan sees ghost devices when invoked against an SNC with VPS enabled.

49427 scsiRescan can hang the CLI.

42933 SCSI device info doesn't show up in Dell SNC Manager Immediately with SNC fw

4.50.03

42000 Drive Dump files have bytes swapped and are unreadable by IBM TOWN Tool.

40947 vpsMapShow should be added to 5k firmware supportDump.

39745 SNC is returning invalid data together with sense data for an invalid lun command.

36296 CLI help command does not display vpsHelp and sfmHelp in the list.

24904 Upgrade QLogic MicroCode to Version 3.03.18

4.45.16

41999 Drive Dump files have bytes swapped and are unreadable by IBM TOWN Tool.

41469 The reserveShow command was not displaying the entire port name for an HPUX

host.

41457 Sony SDX-700C Drive does not respond to AMC refresh.

41238 SCSI Timeout values incorrect for tape read and write.

40488 SCSI command timeout values not conformant to IBM LTO-x Specifications.

40466 Command Flow Logging: Every playback allocates new copy buffer and does not free

if playback interrupted.

39723 IBM Changer ULT3583-TL not in changer device list.

39587 SCSI Over IP: “No Device 6.14.21” message is displayed on SNC when an inquiry

command is send to an invalid device.

39534 Need to properly show serial numbers of targets in the mapShowDatabase output

39388 SNC 4000 not properly logging in to McData switch, which prevents the host from

discovering the Scalar 24 .

38542 uaQueue sending old UAs to host after PLOGI event.

38186 Drive dump was failing on the SNC 5101 and SNC 4000.

37913 CFL was throwing an exception when the log wrapped.

37811 mkRelease doesn’t stop if build component is unsuccessful.

37359 Add paCommandFlowLogEnabled variable to SANMgr MIB.

37237 When testing Enhanced Data Streaming, memory that was allocated by dsStart was

not released after dsStop.

Change

Request

Number

Description

37231 CFL was not using the type field to determine if the log entry was owned by SOIP2.

36626 If there was no memory for a playback copy buffer, CFL was not printing an error

message.

36615 The setTimeHost command does not clear input string prior to new input

39587 SCSI Over IP: “No Device 6.14.21” message is displayed on SNC when an inquiry

command is send to an invalid device.

39534 Need to properly show serial numbers of targets in the mapShowDatabase output

39388 SNC 4000 not properly logging in to McData switch, which prevents the host from

discovering the Scalar 24 .

38542 uaQueue sending old UAs to host after PLOGI event.

38186 Drive dump was failing on the SNC 5101 and SNC 4000.

37913 CFL was throwing an exception when the log wrapped.

37811 mkRelease doesn’t stop if build component is unsuccessful.

37359 Add paCommandFlowLogEnabled variable to SANMgr MIB.

37237 When testing Enhanced Data Streaming, memory that was allocated by dsStart was

not released after dsStop.

37231 CFL was not using the type field to determine if the log entry was owned by SOIP2.

36626 If there was no memory for a playback copy buffer, CFL was not printing an error

message.

36615 The setTimeHost command does not clear input string prior to new input

36295 snmpSet error on AMC View Event Log with viewing level =0 (All Events).

36216 Command Flow Logging: Events for failed medium changer are not available if

changer doesn’t respond when SCSI Channel is rescanned.

36157 When testing Enhanced Data Streaming, the test report was displaying MBPS

instead of the number of Tape Writes completed.

36156 When testing Enhanced Data Streaming using two Fibre Channel ports concurrently

and with the SNC in Target mode, tape test errors were recorded.

36085 When the copy test tool or serverless backup sends an XCOPY command, the

Command Flow Logging (CFL) feature was not displaying a completion status.

36075 Request to pull SNC command logs using AMC interface.

35664 Want ability to reset a specified SCSI bus from the CLI and SNMP.

Change

Request

Number

Description

4© May 2006, ADIC

Documentation

These related documents are currently available for the SNC 5100:

Document Number Document Title

6-00676-03 SNC Firmware 4 User’s Guide

6-00020-02 SNC 5100 for the Scalar 1000 and 10K User Guide

Table des matières

Autres manuels Quantum Stockage

Quantum

Quantum Scalar i500 Manuel utilisateur

Quantum

Quantum SuperLoader DLT Manuel utilisateur

Quantum

Quantum FIREBALL PLUS AS 10.2 Manuel utilisateur

Quantum

Quantum DXi4701 Manuel utilisateur

Quantum

Quantum StorNext QD6000 Manuel utilisateur

Quantum

Quantum PX500 Series Manuel utilisateur

Quantum

Quantum ValueLoader DLT VS160 Manuel utilisateur

Quantum

Quantum Bigfoot 1.2AT Manuel utilisateur

Quantum

Quantum DXi6900 Guide de démarrage rapide

Quantum

Quantum FastStor 2 Manuel utilisateur

Quantum

Quantum Superloader 3 Manuel utilisateur

Quantum

Quantum Scalar i500 Manuel utilisateur

Quantum

Quantum DXi6500 series Manuel technique

Quantum

Quantum StorNext QD7000 Manuel utilisateur

Quantum

Quantum P7000 Series Manuel utilisateur

Quantum

Quantum StorNext QD7000 Manuel utilisateur

Quantum

Quantum DXi7500 Manuel technique

Quantum

Quantum Scalar 10K Manuel utilisateur

Quantum

Quantum ATL PowerStor L200 Series Manuel utilisateur

Quantum

Quantum Superloader 3 Mode d’emploi

Quantum

Quantum RDX 8000 Manuel utilisateur

Quantum

Quantum ValueLoader DLT VS80 Manuel utilisateur

Quantum

Quantum DXi9000 Series Manuel utilisateur

Quantum

Quantum StorNext QD7000 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur