Quantum Scalar 10K Mode d’emploi

Quantum, Scalar, DLT, DLTtape, the Quantum logo, and the DLTtape logo are all registered trademarks of Quantum Corporation. SDLT and Super DLTtape are

trademarks of Quantum Corporation. LTO and Ultrium are trademarks of HP, IBM and Quantum in the U.S.A. and other countries. Other trademarks are the

property of their respective companies.

Release Notes

Contents 0

Purpose of This Release ................................................................................................ 1

New Features and Enhancements............................................................................... 2

Compatibility Matrix..................................................................................................... 2

Resolved Issues .............................................................................................................. 3

Known Issues ................................................................................................................. 5

Documentation............................................................................................................... 6

Contacting Quantum..................................................................................................... 7

Purpose of This Release 0

The Scalar 10K 320 release includes new features and enhancements that extend

its capabilities. These release notes describe these new features and

enhancements, as well as currently known issues and issues that were resolved

for this release of the product. These notes also provide drive and auxiliary

firmware compatibility information. Visit http://www.quantum.com for additional

information about the Scalar 10K and previous releases.

Product Scalar® 10K 320A.00004

Date September 2007

Release Notes

Document 6-00016-32 Rev A

September 2007

2 New Features and Enhancements

New Features and Enhancements 0

The Scalar 10K 320 release includes the following new features and enhancements:

• The Scalar 10K tape library now supports the integration of IBM LTO-4 Fibre Channel

4 Gb drives.

• The posting of Tape Alerts is now configurable.

• Tape Alert log data is returned so that SDLC can generate reports.

Compatibility Matrix 0

See the following table for information on drive and auxiliary firmware compatibility

with the 320 release of Scalar 10K 320A.00004. This information is current as of this

product release. For the most up to date information on Quantum Global Services, please

visit: www.quantum.com/support

Drive Firmware

S10K Release

Library Firmware: 320A.00004

Component Firmware Version

RMU 210A.00002

Scalar DLC 2.7

AMC/LMC 4.5.1/1.5.1

SNC

SNC 3000 3.42.18

SNC 5100 4.45.22

Drive Types

Quantum DLT 8000 V80

Quantum SDLT 220 V94

Quantum SDLT 320 (SCSI) V961

IBM LTO-1 (SCSI) 5AU1

IBM LTO-1 (FC) 5AU1

IBM LTO-2 (SCSI) 67U1

IBM LTO-2 (FC) 67U1

IBM LTO-3 (FC) 2G 73P5

IBM LTO-3 (FC) 4G 73P5

Release Notes

Document 6-00016-32 Rev A

September 2007

Resolved Issues 3

Note: The library assigns 12-character logical serial numbers to 3592-J1A tape drives. If you use IBM Tivoli®Storage

Manager (TSM), install a version of the TSM device driver that is later than maintenance release 5.2.4.4 (for TSM

5.2) or later than 5.3.1.1 (for TSM 5.3) to ensure that TSM can properly identify 3592-J1A tape drives according to

their 12-character logical serial numbers.

Resolved Issues 0

This release of Scalar 10K firmware resolved the following issues..

IBM LTO-4 (FC) 4G 75X2

IBM 3590 E1A / H1A / B1A DOIF_2D4

IBM 3592-J1A D310_A0D

IBM TS1120 D3I1_B25

AIT-2 0203 001

AIT-3 0209_0001

Change

Request

Number

Service

Request

Number

Description

Version 320A.00004

1588 Aux trace screen shows tower numbers in hex.

1589 Need change to display location of print log port.

1727 Inserting AIT-3 tapes always causes retries. Handling too high on the top

magazine cell.

2551 342084 Operator Panel warning when moving tapes outside of COD licensed

slots.

2603 S10K log file corruptions (various).

2747 History log shows wrong initiator.

2806 427194 When one IE station door is being taught and inventoried the RES to all

other IE stations can be incorrect.

2807 Need to have option to speed up I/E station teach operations.

2825 DLT-8000 Sleds incorrectly log a stepper motor task fails to start.

2841 Get/put window test doesn't reserve library, interference with auto

reteach.

2844 Get SAC 7C and Library TA flag 13 instead of TA flag 2 when move tape

to blocked storage

Drive Firmware

S10K Release

Library Firmware: 320A.00004

Component Firmware Version

Release Notes

Document 6-00016-32 Rev A

September 2007

4 Resolved Issues

2876 Logical serial number (12 character) causing configuration errors with

TSM application.

2911 IVT test does not run LTO move cartridge test in 4th IE.

2931 418156 Library should compare drive fiducial labels with actual sled type.

2938 Service login timeout is handled incorrectly at "service->verify->all-

>perform all tests" screen if the 'Accept' input is 'y' when the timeout

occurs.

2939 Remove fibre channel topology and data rate selection for LTO-1 FC

drives.

2974 S10K Tape alert flags are reported incorrectly in the S10K log and need a

mechanism to report tape alert log data back to SDLC.

3024 550364 If the IE cable between the IE and the LMC becomes disconnected and a

new teach is performed the teach fails with SAC 01, 40, A3.

3031 On large dual aisle systems, it has been observed that tower 13 sometimes

fails to teach new on the secondary aisle side.

3032 566896 Serial number and logical serial number are truncated by 1 character on

the operator panel.

3038 527016 E_LSC_WFSCRDBF_BAD_READBUFFER_HANDLE is reported with

RMU 192 and 304 Library firmware.

3041 622572 If a LTO barcode label is printed in the reverse direction the library

incorrectly places the label into the bottom cell and forces a rescan.

3045 Need to merge changes form CR64557(support of LB and LX media for

3592 drives) onto main tree for 320.

3050 582456 On systems with a lot of drives (70+ drives), the Log sense page 3B

interferes with vary on of drive causing SAC 71.

3071 Need to add changes (DDC\LDC\LBI boot \appl code problem 313 code)

to 320 code.

3073 3592 drive modules power supply diags for the 4th drive bay do not work

properly.

3074 S10K 314A FW does not identify media type and usage.

3075 3592 short media returns an incorrect media character through SCSI read

element status.

3081 Code can take the library offline and not post an error.

3352 When varying a drive offline the library does not queue a unit attention

until the menu is exited. It should queue the UA as soon as the drive has

been varied offline and not wait for the user to exit the menu.

Change

Request

Number

Service

Request

Number

Description

Release Notes

Document 6-00016-32 Rev A

September 2007

Known Issues 5

Known Issues 0

This release of Scalar 10K firmware has the following known issues. This list contains

cumulative information for the previously released versions.

Change

Request

Number

Service

Request

Number

Description Workaround

33359 282830 On occasion, the vertical mounting

of a 3590 tape drive might be higher

than the vertical window expected

by the library firmware to

successfully scan for the drive

fiducial. As a result, the library

cannot teach the drive.

Manually adjust the vertical

placement of the 3590 tape drive or

the front bezel until the library can

successfully teach the drive.

40518 When a Teach Current operation is

performed for a DM, a drive teach

failure can return an incorrect bay

number to the Operator Panel.

Physically inspect the drive bay that

the failure indicated or possibly the

bay that is located immediately

before. The bay that is identified by

the failure might not exist.

41203 When using a data tape instead of a

FUP tape to update a list of drives,

the library correctly posts a “BAD

FIRMWARE MEDIA” operator

intervention message, but continues

to the next drive in the list. The

operation should fail and not

continue.

No applicable workaround is

available.

41301 After cleaning cartridges are ejected

from drives, the View dialog (Main

MenuSetupCleaningView)

continues to indicate a Valid status

for the first cleaning cartridge rather

than clearing the status.

Make sure that cleaning cartridges

are inserted into the library by using

the Insert Clean Tape command

(Main MenuCommands Insert/

EjectInsert Clean Tape). This

operation physically inserts the

cartridges and also inserts them into

the library database.

NOTE: Do not use Main Menu

SetupCleaningMedia to perform

this operation. This operation inserts

the cartridges into the library

database only.

Release Notes

Document 6-00016-32 Rev A

September 2007

6 Documentation

Documentation 0

The following documents are currently available for the Scalar 10K.

41305 The usage count for the first cleaning

cartridge increments when a second

cleaning cartridge is used.

Make sure that cleaning cartridges

are inserted into the library by using

the Insert Clean Tape command

(Main MenuCommands Insert/

EjectInsert Clean Tape). This

operation physically inserts the

cartridges and also inserts them into

the library database.

NOTE: Do not use Main Menu

SetupCleaningMedia to perform

this operation. This operation inserts

the cartridges into the library

database only.

Document Number Document Title

6-01023-02 Rev A Scalar 10K Unpacking Instructions

6-01337-04 Rev A Scalar 10K Planning Guide

6-00058-05 Rev A Scalar 10K Operator Guide

6-01338-04 Rev A Scalar 10K SCSI Reference Manual

Change

Request

Number

Service

Request

Number

Description Workaround

Release Notes

Document 6-00016-32 Rev A

September 2007

Contacting Quantum 7

Contacting Quantum 0

More information about this product is available on the Service and Support website at

www.quantum.com/support. The Service and Support Website contains a collection of

information, including answers to frequently asked questions (FAQs). You can also access

software, firmware, and drivers through this site.

For further assistance, or if training is desired, contact Quantum:

For the most updated information on Quantum Global Services, please visit:

www.quantum.com/support

Quantum Technical Assistance

Center in the USA:

+1 800-284-5101

For additional contact information: www.quantum.com/support

To open a Service Request: www.quantum.com/esupport

Autres manuels pour Scalar 10K

Table des matières

Autres manuels Quantum Stockage

Quantum

Quantum LTO 3A Mode d’emploi

Quantum

Quantum F2000 Manuel utilisateur

Quantum

Quantum Scalar i500 Manuel utilisateur

Quantum

Quantum DLTtape DLT 2000 Manuel utilisateur

Quantum

Quantum DXi6900 Guide de démarrage rapide

Quantum

Quantum Internal Storage System Travan 40 GB Manuel utilisateur

Quantum

Quantum Q250 Manuel du produit

Quantum

Quantum DLTtape DLT 2000 Manuel

Quantum

Quantum DX3000 Manuel utilisateur

Quantum

Quantum PX502 Manuel utilisateur

Quantum

Quantum Scalar 10K Manuel utilisateur

Quantum

Quantum StorNext QD7000 Manuel utilisateur

Quantum

Quantum QXS G2 Series Manuel d'utilisation

Quantum

Quantum LTO 2U Feuille d'instructions

Quantum

Quantum DPM 5500 Manuel utilisateur

Quantum

Quantum P3000 Series Manuel utilisateur

Quantum

Quantum QXS 12G Series Manuel technique

Quantum

Quantum LTO 1U Manuel utilisateur

Quantum

Quantum ATL 7100 Manuel utilisateur

Quantum

Quantum Tape Drives A-Series Manuel utilisateur

Quantum

Quantum DLT-V4 Manuel utilisateur

Quantum

Quantum LTO-4 (Model B) Manuel utilisateur

Quantum

Quantum DXi4601 Manuel utilisateur

Quantum

Quantum ValueLoader DLT VS80 Mode d'emploi

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur