Pyle Pro PCAU33 Manuel utilisateur

www.pyleaudio.com

PCAU33

2x75W Max Stereo Power Amplifier

with USB Input

1 - Pyle Pro PCAU33 Manual

FEATURES AND CONTROLS

Pyle Pro PCAU33 Manual - 2

Your new Pyle Pro PCAU33 Stereo Power Amplifier

gives you the power and versatility you need in a professional sound system.

Its wide frequency response make it suitable for amplifying music or vocal

program material.

The front located USB 2.0 interface allows you to connect the input of your

MP3 devices conveniently. It can be used for meeting halls, house, restaurant,

school, stores, live bands, or office.

3 - Pyle Pro PCAU33 Manual

FEATURES AND CONTROLS

(1)Blue LED Output Level Display

(2)Power On/Off and LED Indicator

Main power switch, the indicator lights when the amplifier is turned on.

(3)USB 2.0 Input Interface with LED Indicator

Press to play the last song backward, press to play the next song forward,

and press to play and/or pause the song. When the song is ceased from playing,

it will be memorized to resume once the amplifier is reactivated and/or the USB

input is selected again.

(4)USB/LINE Input Selector

Press in to select the USB input and press up for the LINE input. When it is switched

to LINE input while the USB is still on playing, the playing signal of USB continues,

just it is not sent to the amplifier's output.

(5)MASTER Volume Control

Lets you control the overall volume level.

(6)BASS and TREBLE Controls

Allows you to boost or attenuate bass and treble for the desired sound.

(7)LINE RCA Input

Lets you connect most high level audio sources such as CD player, tape deck, tuner,

camcorder, or VCR. It is compatible with the computerized devices (MP3) via 3.5mm

to RCA Converter.

(8)Push Type Speaker Terminal

Lets you easily connect speaker wires directly to the amplifier. The speaker

impedance can be ranged from 4 to 8 Ohms for the general stereo output. The total

speaker impedance must be at least 4-Ohm per channel at stereo mode.

(9)110/220 Voltage Selector

This amplifier has selectable input voltage from 110V/60Hz (the standard in USA and

CANADA) to 220V/50Hz (for EUROPEAN operation). Please make sure the switch is

in the proper position before operating, otherwise, the severe damage will be

incurred and not covered by the warranty.

(10)Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the

amplifier suddenly turns off and will not turn on, check the fuse and if necessary

replace it with a 1.5-amp, 250-volt, fast-acting, 5x20mm fuse (not supplied).

CONNECTION DIAGRAM

Pyle Pro PCAU33 Manual - 4

Specifications are typical; individual units might vary.

Specifications are subject to change and improvement without notice.

Specifications

5 - Pyle Pro PCAU33 Manual

Output Power, 2 channels driven

4-Ohm, 1 kHz, 1% THD .............................................................................. 15Wx2

4-Ohm, 1 kHz, 10% THD ............................................................................. 23Wx2

Max Power ................................................................................................... 75Wx2

Total Harmonic Distortion, 1 kHz Rated Power ................................................ 0.3%

Input Sensitivity, 1 kHz, 4-Ohm Rated Power

LINE ....................................................

........................................................

200mV

USB ....................................................

........................................................

200mV

Frequency Response ............................................................

...............

20Hz-20kHz

Signal to Noise Ratio, 1 kHz, 4-Ohm Rated Power

LINE .....................................................

..........................................................

80dB

USB .....................................................

..........................................................

80dB

Tone Controls

BASS ............................................................................................. +/-10dB, 100Hz

TREBLE ......................................................................................... +/-10dB, 10kHz

Power Requirement ................................................. 120V AC 60Hz/230V AC 50Hz

Power Fuse .......................................................... 1.5A, 250V fast-acting, 5x20mm

Dimensions, inches (mm) WxHxD ..................... 7.48 x 2.87 x 5.39 (190 x 73 x 137)

Weight, lbs (kg) ....................................................................................... 4.61 (2.09)

Pyle Pro PCAU33 Manual - 6

PYLE PRO AMPLIFIER

7 - Pyle Pro PCAU33 Manual

Your Pyle Pro Amplifier is an example of superior design and craftsmanship.

The following suggestions will help you care for your amplifier so you can

enjoy years of use:

Keep the amplifier dry. If it gets wet, wipe immediately.

Use the amplifier only in well-ventilated installations.

Handle the amplifier gently and carefully - do nto drop!

Keep the amplifier away from dust adn dirt.

Wipe occasionally with a damp cloth to keep it looking new.

Do not use harsh chemicals, solvents or detergents!

Table des matières

Autres manuels Pyle Pro Amplificateur

Pyle Pro

Pyle Pro PTAU45 Manuel utilisateur

Pyle Pro

Pyle Pro PCAU48BT Manuel utilisateur

Pyle Pro

Pyle Pro PWMA600 Manuel utilisateur

Pyle Pro

Pyle Pro PT-1201X Manuel utilisateur

Pyle Pro

Pyle Pro PWMA-1003T Manuel utilisateur

Pyle Pro

Pyle Pro PYLE PRO amplifier PT-1100/PT3300 Manuel utilisateur

Pyle Pro

Pyle Pro PEXA3000 Manuel utilisateur

Pyle Pro

Pyle Pro PT4000 Manuel utilisateur

Pyle Pro

Pyle Pro PCA2 Manuel utilisateur

Pyle Pro

Pyle Pro PWMA100 Manuel utilisateur

Pyle Pro

Pyle Pro PSA2000 Manuel utilisateur

Pyle Pro

Pyle Pro PEA4000 Manuel utilisateur

Pyle Pro

Pyle Pro PT-2400 Manuel utilisateur

Pyle Pro

Pyle Pro PT110 Manuel utilisateur

Pyle Pro

Pyle Pro PT-600A Manuel utilisateur

Pyle Pro

Pyle Pro Waisband Amplifier PWMA30 Manuel utilisateur

Pyle Pro

Pyle Pro PQ1000 Manuel utilisateur

Pyle Pro

Pyle Pro PQA3100 Manuel utilisateur

Pyle Pro

Pyle Pro PD950A Manuel utilisateur

Pyle Pro

Pyle Pro Waistband Amplifier PWMA20 Manuel utilisateur

Pyle Pro

Pyle Pro PTA1 Manuel utilisateur

Pyle Pro

Pyle Pro PD750A Manuel utilisateur

Pyle Pro

Pyle Pro PT610 Manuel utilisateur

Pyle Pro

Pyle Pro AZR6XA Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur