ⅥControl of Motions
1. What can be controlled?
①Motions along X, Y, Z, E
②Disable stepper motor: can unlock the motors to move muzzle and platform freely by hands.
2. Attention: E motion indicates the extruder motor, to move it the nozzle temperature must be
over 175°C.
3. Operation sequence:
1) Move X, Y, Z:
Info screen -- "Prepare" -- "Move axis" -- "Move 10mm/Move 1mm"
-- "Move X/Move Y/Move Z/Move E" --
2) Disable stepper motors:
Info screen -- "Prepare" -- "Disable steppers"
Illustration
190°is set automatically for
nozzle temperature.
40°C is set automatically for
bed temperature.
