ProSoft Technology ILX800-SMSG Manuel utilisateur

ILX800-SMSG

Micro800 Platform

SMS Text Plug-in Module for GSM

Networks

August 24, 2016

USER MANUAL

Your Feedback Please

We always want you to feel that you made the right decision to use our products. If you have suggestions, comments,

compliments or complaints about our products, documentation, or support, please write or call us.

How to Contact Us

ProSoft Technology, Inc.

9201 Camino Media, Suite 200

Bakersfield, CA 93311

+1 (661) 716-5100

+1 (661) 716-5101 (Fax)

www.prosoft-technology.com

[email protected]

ILX800-SMSG User Manual

August 24, 2016

ProSoft Technology®, is a registered copyright of ProSoft Technology, Inc. All other brand or product names are or

may be trademarks of, and are used to identify products and services of, their respective owners.

ProSoft Technology®Product Documentation

In an effort to conserve paper, ProSoft Technology no longer includes printed manuals with our product shipments.

User Manuals, Datasheets, Sample Ladder Files, and Configuration Files are provided on the enclosed DVD in

Adobe®Acrobat Reader file format (.PDFs). These product documentation files may also be freely downloaded from

our web site: www.prosoft-technology.com

Important Safety Information

The following Information and warnings pertaining to the radio module must be heeded.

WARNING –EXPLOSION HAZARD –DO NOT REPLACE ANTENNAS UNLESS POWER HAS BEEN SWITCHED

OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.

"THIS DEVICE CONTAINS A TRANSMITTER MODULE, FCC ID: . PLEASE SEE FCC ID LABEL ON BACK OF

DEVICE."

"THIS DEVICE USES AN INTERNAL COMPACT FLASH RADIO MODULE AS THE PRIMARY RADIO

COMPONENT. THE COMPACT FLASH RADIO MODULE DOES NOT HAVE AN FCC ID LABEL. THE COMPACT

FLASH RADIO MODULE HAS NO USER SERVICEABLE PARTS."

"THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING

TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE

MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE

UNDESIRED OPERATION."

"CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR

COMPLIANCE COULD VOID THE USER’s AUTHORITY TO OPERATE THE EQUIPMENT."

Industry Canada Requirements

"THIS DEVICE HAS BEEN DESIGNED TO OPERATE WITH AN ANTENNA HAVING A MAXIMUM GAIN OF 24 dB.

AN ANTENNA HAVING A HIGHER GAIN IS STRICTLY PROHIBITED PER REGULATIONS OF INDUSTRY

CANADA. THE REQUIRED ANTENNA IMPEDANCE IS 50 OHMS."

"TO REDUCE POTENTIAL RADIO INTERFERENCE TO OTHER USERS, THE ANTENNA TYPE AND ITS GAIN

SHOULD BE CHOSEN SUCH THAT THE EQUIVALENT ISOTROPICALLY RADIATED POWER (EIRP) IS NOT

MORE THAN THAT REQUIRED FOR SUCCESSFUL COMMUNICATION."

"THE INSTALLER OF THIS RADIO EQUIPMENT MUST INSURE THAT THE ANTENNA IS LOCATED OR

POINTED SUCH THAT IT DOES NOT EMIT RF FIELD IN EXCESS OF HEALTH CANADA LIMITS FOR THE

GENERAL POPULATION; CONSULT SAFETY CODE 6, OBTAINABLE FROM HEALTH CANADA."

Important User Information

Important: Power must be provided from a limited power source.

Because of the variety of uses for the products described in this publication, those responsible for the application and

use of these products must satisfy themselves that all necessary steps have been taken to assure that each

application and use meets all performance and safety requirements, including any applicable laws, regulations, codes

and standards. In no event will ProSoft Technology be responsible or liable for indirect or consequential damage

resulting from the use or application of these products.

Any illustrations, charts, sample programs, and layout examples shown in this publication are intended solely for

purposes of example. Since there are many variables and requirements associated with any particular installation,

ProSoft Technology does not assume responsibility or liability (to include intellectual property liability) for actual use

based upon the examples shown in this publication.

Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation and Maintenance of Solid-State

Control (available from your local Rockwell Automation office), describes some important differences between solid-

state equipment and electromechanical devices that should be taken into consideration when applying products such

as those described in this publication.

Throughout this publication, notes may be used to make you aware of safety considerations. The following

annotations and their accompanying statements help you to identify a potential hazard, avoid a potential hazard, and

recognize the consequences of a potential hazard:

Warning: Identifies information about practices or circumstances that can cause an explosion in a hazardous

environment, which may lead to personal injury or death, property damage, or economic loss.

Caution: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss.

Important: Identifies information that is critical for successful application and understanding of the product.

Burn Hazard: Labels may be located on or inside the equipment (for example, drive or motor) to alert people that

surfaces may be dangerous temperatures.

Shock Hazard: Labels may be located on or inside the equipment (for example, drive or motor) to alert people that

dangerous voltage may be present.

Environment and Enclosure

Caution: This equipment is intended for use in a Pollution Degree 2 industrial environment, in overvoltage Category

II applications (as defined in IEC publication 60664-1), at altitudes up to 2000 meters without derating.

This equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR Publication 11. Without

appropriate precautions, there may be potential difficulties ensuring electromagnetic compatibility in other

environments due to conducted as well as radiated disturbance.

This equipment is supplied as "open type" equipment. It must be mounted within an enclosure that is suitably

designed for those specific environmental conditions that will be present and appropriately designed to prevent

personal injury resulting from accessibility to live parts. The interior of the enclosure must be accessible only by the

use of a tool. Subsequent sections of this publication may contain additional information regarding specific enclosure

type ratings that are required to comply with certain product safety certifications.

See NEMA Standards publication 250 and IEC publication 60529, as applicable, for explanations of the degrees of

protection provided by different types of enclosure. Also, see the appropriate sections in this publication, as well as

the Allen-Bradley publication 1770-4.1 ("Industrial Automation Wiring and Grounding Guidelines"), for additional

installation requirements pertaining to this equipment.

Caution: Preventing Electrostatic Discharge

This equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal

operation. Follow these guidelines when you handle this equipment:

Touch a grounded object to discharge potential static.

Wear an approved grounding wriststrap.

Do not touch connectors or pins on component boards.

Do not touch circuit components inside the equipment.

If available, use a static-safe workstation.

When not in use, store the equipment in appropriate static-safe packaging.

Caution: POINT I/O is grounded through the DIN-rail to chassis ground. Use zinc-plated, yellow-chromated steel

DIN-rail to assure proper grounding. Using other DIN-rail materials (for example, aluminum, plastic, and so on) which

can corrode, oxidize or are poor conductors, can result in improper or intermittent platform grounding.

Caution: When you connect or disconnect the Removable Terminal Block (RTB) with field side power applied, an

electrical arc can occur. This could cause an explosion in hazardous location installations.

Be sure that power is removed or the area is nonhazardous before proceeding.

Agency Approvals and Certifications

FCC

CE Mark/ETSI

UL/cUL Class 1, Division 2

ATEX Zone 2

CB Safety

PTCRB

ILX800-SMSG ♦ Micro800 Platform Contents

SMS Text Plug-in Module for GSM Networks User Manual

ProSoft Technology, Inc. Page 5 of 39

August 24, 2016

Contents

Your Feedback Please........................................................................................................................2

How to Contact Us..............................................................................................................................2

ProSoft Technology®Product Documentation....................................................................................2

Important Safety Information...............................................................................................................3

Important User Information .................................................................................................................3

Agency Approvals and Certifications..................................................................................................4

1Start Here 7

1.1 Overview....................................................................................................................7

1.2 Package Contents.....................................................................................................8

1.3 System Requirements...............................................................................................9

1.4 Installing the SIM Card..............................................................................................9

1.5 Installing the ILX800-SMSG Plug-in Module...........................................................10

1.6 Installing an Antenna...............................................................................................10

2Setting Up the Controller Program 13

2.1 The Sample Controller Program .............................................................................13

2.2 Importing the Sample Program ...............................................................................14

2.3 Configuring the Module's Slot Number ...................................................................16

2.4 Entering a Test Phone Number...............................................................................17

2.5 Connecting the Controller to Your PC.....................................................................17

2.6 Downloading the Sample Program .........................................................................18

2.7 Going Online with the Controller .............................................................................20

2.8 Customizing Your Controller Program Logic...........................................................22

2.8.1 Sending Out an Event-Triggered Text Message.....................................................22

3Using Your ILX800-SMSG Plug-in Module 23

3.1 Verifying Wireless Communication .........................................................................23

3.2 Setting Up the Phone Number Lists........................................................................23

3.2.1 Receiver List............................................................................................................23

3.2.2 Whitelist...................................................................................................................25

3.3 Text Message Commands ......................................................................................27

3.3.1 Status Information Requests...................................................................................27

3.3.2 Commands to Execute Some Action ......................................................................28

4Security Tips 29

4.1 Enable the Whitelist Feature...................................................................................29

4.2 Implement Password Protection .............................................................................29

4.3 Restrict Access to Output Control...........................................................................29

5Diagnostics and Troubleshooting 31

5.1 LED Status Indicator ...............................................................................................31

5.2 Troubleshooting.......................................................................................................31

Contents ILX800-SMSG ♦ Micro800 Platform

User Manual SMS Text Plug-in Module for GSM Networks

Page 6 of 39 ProSoft Technology, Inc.

August 24, 2016

5.3 Status Data............................................................................................................. 32

6Reference 35

6.1 Product Specifications ............................................................................................ 35

6.2 Radio Specifications ............................................................................................... 35

6.3 Hardware Specifications......................................................................................... 35

7Support, Service & Warranty 37

7.1 Contacting Technical Support................................................................................. 37

7.2 Warranty Information .............................................................................................. 38

Index 39

ILX800-SMSG ♦ Micro800 Platform Contents

SMS Text Plug-in Module for GSM Networks User Manual

ProSoft Technology, Inc. Page 7 of 39

August 24, 2016

1 Start Here

In This Chapter

Overview................................................................................................. 7

Package Contents .................................................................................. 8

System Requirements............................................................................. 9

Installing the SIM Card............................................................................ 9

Installing the ILX800-SMSG Plug-in Module..........................................10

Installing an Antenna .............................................................................10

To get the most benefit from this User Manual, you should have the following skills:

Rockwell Automation®Connected Components Workbench™ software: launch the

program, configure program logic, and transfer the program to the processor

Microsoft Windows: install and launch programs, execute menu commands, navigate

dialog boxes, and enter data

Hardware installation and wiring: safely connect the controller and plug-in module to a

power source

Caution: You must be able to complete the application without exposing personnel or equipment to

unsafe or inappropriate working conditions.

1.1 Overview

The ProSoft Technology SMS plug-in module adds bi-directional SMS text messaging

capability to the Allen-Bradley Micro820, Micro830, and Micro 850 controllers. Operating

over the GSM cellular network, the plug-in module provides a cost effective and secure

method for OEMs to add remote communication features using cellular phones as the user

interface to their machines and systems. Applications include remote alarming,

environmental/energy monitoring, data collection, machine condition, inventory status alerts

and production counts.

The SMS plug-in is activated by installing a standard GSM Voice/SMS SIM card (contact

your local GSM cellular provider for plan options and costs). After activation it will associate

to the local provider tower and enable bi-directional text messaging between the controller

and remote cell phones. Because the module uses SMS, there is no need for costly cellular

data plans.

Contents ILX800-SMSG ♦ Micro800 Platform

User Manual SMS Text Plug-in Module for GSM Networks

Page 8 of 39 ProSoft Technology, Inc.

August 24, 2016

The SMS plug-in snaps into an open slot in the front of the controller. The controller

provides power and communicates with the plug-in module over the backplane. A sample

CCW program is available at no additional cost with plug-in function block drivers and a

sample program provided in Structured Text, Ladder and Function Block languages.

Programmers may use these sample programs to create their own projects for sending and

receiving messages, alarms and machine status updates.

The front mounted coax connector allows for either a direct-mounted antenna or externally

mounted antenna (installed outside the panel or cabinet for better cellular reception).

Antennas must be ordered separately.

1.2 Package Contents

The following components are included with your ILX800-SMSG plug-in module.

Note: You will also need a SIM card and antenna (not included). For information on suitable antennas, please

see Installing an Antenna.

Qty.

Part Name

Part Number

Part Description

ILX800-SMSG plug-in

module

ILX800-SMSG

SMS Text Plug-in Module for GSM

Networks

ILX800-SMSG ♦ Micro800 Platform Contents

SMS Text Plug-in Module for GSM Networks User Manual

ProSoft Technology, Inc. Page 9 of 39

August 24, 2016

1.3 System Requirements

The ILX800-SMSG plug-in module requires the following minimum hardware and software

components:

Rockwell Automation®Micro820, Micro830, or Micro850 controller, with compatible

power supply

Rockwell Automation Connected Components Workbench programming software

version 1.01 or higher

Rockwell Automation RSLinx communication software version 2.57 or higher

ILX800-SMSG sample controller program (download at www.prosoft-technology.com)

1.4 Installing the SIM Card

1 Turn the ILX800-SMSG plug-in module over so that the circuit board is facing up.

2 Orient the plug-in module so that the backplane connector is toward the top. Locate the

SIM card holder in the middle of the board.

3 Unlock the SIM card holder's clip by sliding it to the right.

4 Lift the card holder clip and place the SIM card in the card holder, matching the rounded

corner of the card with that of the card holder.

Contents ILX800-SMSG ♦ Micro800 Platform

User Manual SMS Text Plug-in Module for GSM Networks

Page 10 of 39 ProSoft Technology, Inc.

August 24, 2016

5 Lower the card holder clip and slide it to the left until it locks into place.

1.5 Installing the ILX800-SMSG Plug-in Module

Important: The controller should be powered off when the plug-in module is installed on or removed from the

controller.

1 Orient the plug-in module so the antenna end is toward the front of the controller.

2 Align the plug-in module's three tabs with the three notches in the module slot on the

controller. Snap the plug-in module into place.

1.6 Installing an Antenna

An external antenna is required to connect the plug-in module to the cellular network. The

antenna should be rated for the following frequency bands:

890-960 MHz

1710-1880 MHz

Table des matières

Autres manuels ProSoft Technology Unité de contrôle

ProSoft Technology

ProSoft Technology MVI56-PNPM Manuel utilisateur

ProSoft Technology

ProSoft Technology ILX34-MBS485 Manuel utilisateur

ProSoft Technology

ProSoft Technology ControlLogix MVI56E-SMGC Manuel utilisateur

ProSoft Technology

ProSoft Technology MVI69-DFCM Manuel utilisateur

ProSoft Technology

ProSoft Technology MVI69E-LDM-MQTT Manuel utilisateur

ProSoft Technology

ProSoft Technology inRAx MVI46-DFNT Manuel utilisateur

ProSoft Technology

ProSoft Technology InRAX MVI46-PDPS Manuel utilisateur

ProSoft Technology

ProSoft Technology ILX69-PBM Manuel utilisateur

ProSoft Technology

ProSoft Technology inRAx MVI56-S3964R Manuel utilisateur

ProSoft Technology

ProSoft Technology MVI69E-GEC Manuel utilisateur

ProSoft Technology

ProSoft Technology MVI69-GEC Manuel utilisateur

ProSoft Technology

ProSoft Technology PLX51-HART-4O Manuel utilisateur

ProSoft Technology

ProSoft Technology inRax MVI56-DNPSNET Manuel utilisateur

ProSoft Technology

ProSoft Technology InRax MVI71-DNPSNET Manuel utilisateur

ProSoft Technology

ProSoft Technology MVI71-GEC Manuel utilisateur

ProSoft Technology

ProSoft Technology MVI56E-LDM-MQTT Manuel utilisateur

ProSoft Technology

ProSoft Technology ProLinx ASCII Note de version

ProSoft Technology

ProSoft Technology inRAx MVI56-CAS Manuel utilisateur

ProSoft Technology

ProSoft Technology ControlLogix inRAx MVI56E-MNETR Manuel utilisateur

ProSoft Technology

ProSoft Technology MVI56E-61850S Manuel utilisateur

ProSoft Technology

ProSoft Technology CompactLogix MVI69E-MBS Manuel utilisateur

ProSoft Technology

ProSoft Technology inRAX MVI69-S3964R Manuel utilisateur

ProSoft Technology

ProSoft Technology MVI56E-SIE Manuel utilisateur

ProSoft Technology

ProSoft Technology inRax MVI56E-GSC Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur