PROAIM P-STRG-CF Manuel utilisateur
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
CF Carbon Fiber Star Ring for Handheld Gimbal
Camera Stabilizers & Body Support Rigs (P-STRG-CF)
Assembly Manual
2 x L-type Allen key
(Size:- 5mm, 3mm)
Top CF Star Ring
4 x Allen Bolts
(Size: 4 x 16)
4 x Allen Bolts
(Size:-3 x 10)
4 x Allen Bolts
(Size: 3 x 12)
4 x Allen Bolts
(Size: 4 x 20)
1 x T-type Allen key
(Size:-2.5mm)
Boom CF Star Ring Bag Packing
2
FUNCTION
Stands in Upright Posions with
Addion Mounng
keep the setup upright without using a
stand by providing a wide base that does
not fall forward or backward.
Foot Clamps
Index marking to
enable the operator
to eciently ax the
clamps and
quick-release adapter
where they were the
last me they were
shoong.
Scalling
Eortlessly aach to most body
support rigs and Camera can be move
exible and adjust the posions.
Spool Clamps
Quick Release Adapter
Index Marking
Index marking helps to
adjust the posions of
spool clamps and
adapter.
Underslung and over-slung mode using the quick-
release adapter with M3 and M4 threads
Wide compability movi & R2 Quick
release plate with addional accessory
security, control over your 2-axis and
3-axis gimbals with the adapter
3
• Aach the top CF & boom CF Star Ring.
NOTE: The portable and travel-friendly design
can be detached into two pieces to ensure
comfortable carriage to dierent shoong
locaons.
CF Carbon Fiber Star Ring Setup
• All three foot clamps have been removed, as
shown in the image.
• Aer aaching the Star Ring, ghten the allen
bolts it using the 2.5mm Allen key, as shown
in the image.
• The Star Ring has sturdy spool clamps that
easily aach to most body support rigs.
Features: The Spool clamp can be posioned at
the same place where they were the last me
you were shoong using the index markings.
• Remove the aached Foot clamp on the Top
CF Star ring by loosening it.
• Repeat the same process with the other two
foot clamps.
• Aach the foot clamps with the boom CF
Star Ring.
4
• Aer aaching the foot clamps, ghten them
using the provided knobs.
• Aer aaching the spool clamp, insert Allen
bolts in it.
• Repeat the same process with the second
spool clamp.
• Loosen and remove the bolts using the Allen
key.
Feature: The octagonal ring features index
marking to enable the operator to eciently
ax the clamps and quick-release adapter
where they were the last me they were
shoong.
• Detach the spool clamp from the Star Ring.
• Change the spool clamp's direcon by
aaching the clamp's outer poron to the
inside, as shown in the image.
• Now, the direcon of the spool clamps is on
the outside, as shown in the image.
Feature: Its robust spool clamps eortlessly
aach to most body support rigs, such as
Proaim Hawk Body Support, Hawk Lite Body
Support, Gimbal Bird Body Support, and Flycam
Flowline Camera Gimbal Tilt Control Kit.
Feature: It incorporates foot clamps that keep
the setup upright without a stand, providing a
broad base that does not fall forward or
backward as shown in the picture.
Spool Clamps Assembly Inside
5
• To straighten the quick-release adapter on
the Top CF Star Ring, loosen all its bolts using
the Allen key.
• Aer aaching, re-insert the bolts in the
adapter and ghten them using the Allen key.
• Detach the quick-release adapter as shown.
• Aach the quick-release plate from the
boom side of the Top CF Star Ring.
• Aach the quick-release adapter.
• Loosen the knob of the quick-release adapter
and remove it.
Quick Release Adapter Assembly Inside
6
• Insert the bolt in the quick-release plate.
NOTE: It can be used in both underslung and
over-slung mode using quick-release adapters
with M3 and M4 threads, to which the MOVI
quick-release plate and R2 quick-release plate
can be mounted, respecvely.
• To aach the gimbal (Not Included), slide the
quick-release plate onto the Star Ring and
ghten the knob to secure the setup.
• Aer inserng the bolt, aach the plate with
the QR Movi (Not Included).
• Aer the aachment, secure the
quick-release plate using the Allen key.
• Aach the QR Movi with the gimbal
(Not Included) and press the locking lever by
pressing the lever.
• Slide the Camera (Not Included) onto the
quick-release plate of the gimbal.
NOTE: Unlock unmatched stability and control
over your 2-axis and 3-axis gimbals with the
Handheld CF Star Ring,
7
• Aer mounng the Camera (Not Included),
press the locking lever from the boom side
to secure the Camera.
• The Star Ring oers enhanced support and
exibility, allowing gimbal operators to
achieve more stable control over their camera
gimbals to achieve professional-quality shots
consistently.
YOUR PROAIM CF CARBON FIBER STAR RING FOR HANDHELD GIMBAL
CAMERA STABILIZERS & BODY SUPPORT RIGS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
Autres manuels PROAIM Accessoires pour appareils photo
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM P-MWP-D Manuel utilisateur
PROAIM
PROAIM RCSW-CNBD-01 Manuel utilisateur
PROAIM
PROAIM TRK-4P Manuel utilisateur
PROAIM
PROAIM CINEMA Series Manuel utilisateur
PROAIM
PROAIM RS-1 Manuel utilisateur
PROAIM
PROAIM MB-10 Manuel utilisateur
PROAIM
PROAIM Falcon P-FLCN Manuel utilisateur
PROAIM
PROAIM SL-051 Manuel utilisateur
PROAIM
PROAIM P-GDTR-01 Manuel utilisateur
PROAIM
PROAIM RN-244-00 Manuel utilisateur
PROAIM
PROAIM LB230 Manuel utilisateur
PROAIM
PROAIM P-SPK-13 Manuel utilisateur
PROAIM
PROAIM KITE-22-POPULAR Manuel utilisateur
PROAIM
PROAIM P-LTCP-01 Manuel utilisateur
PROAIM
PROAIM TK-CLIP-00 Manuel utilisateur
PROAIM
PROAIM SL-FLO-01 Manuel utilisateur
PROAIM
PROAIM CT-STRK-02 Manuel utilisateur
PROAIM
PROAIM P-WV-2PL Manuel utilisateur
