Pro2 AVS-5800 C Manuel utilisateur

Model: AVS-5800 C

5.8 GHz Audio/Video Sender

1. Package Content………………………………………………1

2. Panel Control and Function……...……………………………2

3. Setup Guide…………………..………………….……………4

4. Orient Transmitter/Receiver for optimal performance…….….5

5. Important Safety Information….……………………..…..……6

6. Specifications………………………………………………….7

Check to make sure that all units shown as below are enclosed. If something

missed, please contact your dealer.

1. 5.8GHz Transmitter x 1 2. 5.8GHz Receiver x 1

UHF: 433.92MHz

3. IR Mouse x 1 / fasten strips x 2

4. Accessories

1. Package Content

Contents

408-000497-01

Australia Standard:

(1) Power Adapters (230V) x 2 (2) RCA cable x 2

USA Standard

(1) Power Adapters (120V) x 2 (2) RCA Cable x 2

1. – Channel selection switch to find optimal

reception, the transmitter and

receiver must to be Configured as the same channel.

2A –Remote control LED sends IR rays, to remotely control the source AV

equipment.

2B –Remote control LED receives IR rays from remote controller.

3A – Directional 5.8GHz A/V antenna sends A/V signal from source

equipment.

3B – Directional 5.8GHz A/V antenna receives audio and video signal.

4 – Power on/off switch.

5 – DC power input, connect to power supply. (9v).

6 – IR Mouse output, to remotely control source AV equipment.

7A –Video Jack, (yellow), input from source AV equipment.

7B –Video Jack, (yellow), output to TV.

8A –Audio Jack, Right (red), input from source AV equipment.

8B –Audio Jack, Right (red), output to TV.

9A –Audio Jack, Left (white), input from source AV equipment.

9B –Audio Jack, Left (white), output to TV.

10 –Power LED.

2. Panel Control and Function

42A

5.8GHz Transmitter

5.8GHz Receiver

To enjoy a life of wireless video and audio, just connect the transmitter to any

A/V source you like and connect the receiver to a TV, monitor or speaker in

another location.

□ Transmitter

□ Receiver

For optimal performance, both the audio/video and remote control antennas

should be carefully oriented as described below. For maximum transmitting

range, try to minimize obstacles (e.g. your TV or other electronics, large

furniture) where between the transmitter and receiver.

Orients the 5.8GHzA/VAntennas

NOTE: Make sure the ON/OFF switch is in the 「OFF」position before connection

3. Setup Guide

1. Connect one end of the RCA cable (or

scart cable) to the audio and video jacks,

and connect the other end to a source

device via its “AV output”.

2. Connect the DC plug of the adapter to the

DC jack, and connect the power supply to

an outlet.

3. Fix IR mouse next to or in front of IR

sensor of source device, or alternatively

have transmitter facing directly toward the

source device.

4. Orient Transmitter/Receiver for optimal performance

The system delivers high-quality audio and

video by using directional antennas, which must

be oriented in the best ways. The antennas are

designed to be able to vertically and horizontally

pivot and rotate in almost any direction.

In most situations, the flat-pitted face of the antennas on both the transmitter

and receiver should be facing one another and perpendicular (at a right angle)

to an imaginary line drawn between the two units. Three examples are shown

as Fig-1, Fig-2 and Fig-3. Since all homes are different, for optimal reception,

additional slight pivots or rotations may be necessary. If the transmitter and

receiver are less than 10 feet apart, suggest that the antennas are lying on their

casings since the distance is so short.

1Connect one end of the RCA cable (or

scart cable) to the audio and video jacks

and connect the other end to a TV (or

monitor, speakers) via its “AV input”.

2Connect the DC plug of the adapter to

the DC jack, and connect the power

supply to an outlet.

4 5

3. Keep the IR window oriented toward front when using your source device remote

controller.

LED

AUDIO

LEFT

AUDIO

RIGHT VIDEO

AUDIO

LEFT

AUDIO

RIGHT

VIDEO

5.8GHz Antenna

Receiver

Transmitter Fig-1

Pitted

Side

Pitted

Side

5.8GHz Antenna

Transmitter

Receiver

Fig-2

Transmitter

Receiver

5.8GHz Antenna

Fig-3

To prevent fire or shock hazard, do not expose this product to rain and

moisture. For example: do not use near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or nearby a swimming pool. To avoid electric

shock, do not take apart this product, provided as an accessory. This product

should be operated only under power supply. Do not overload wall outlets and

extension outlets as this can result in the risk of fire or electric shock.

OPERATING FREQUENCY 5.725Ghz-5.875Ghz 4 User Selectable

Channels

RADIATED POWER 50mV@3m

RANGE(LINE-OF-SIGHT) Up to 300 Feet line of sight

ANTENNA TYPE Fixed Directional Patch

RECEIVER SENSITIVITY -84dBm

VIDEO FORMAT NTSC or PAL

VIDEO CONNECTOR RCA Female @ 75 OHMS 1 Volt p-p

AUDIO CONNECTOR RCA Female Stereo Left & Right @

600 OHMS 1 Volt p-p

TEMPERATURE RANGE 0°C to 50°C

OPEARATING VOLTAGE 9VDC – Adapter

CURRENT CONSUMPTION Transmitter 250mA@9VDC

Receiver 350mA@9VDC

DIMENSIONS 130mm x123mm x55mm

WEIGHT 0.3kg each

FCC/CE APPROVED Yes

5. Important Safety Information

□

□□

□

NOTE:

This equipment has been tested and found to comply with the limits regulated

by FCC and CE. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction, may cause harmful interference

to radio communications. The change or modifications no expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment. To comply with the FCC RF exposure compliance

requirements, no change to the antenna or the device is permitted. Any

change to the antenna or the device could result in the device exceeding the

RF exposure requirements and void user’s authority to operate the device.

6. Specifications

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur