Printronix L7032 Manuel utilisateur
L7032 Laser Printer
Quick Setup Guide
®
This Quick Setup Guide contains a
CD-ROM with the following materials:
•The L7032 User’s Manual
•This Quick Setup Guide in English,
French, German, Italian, Russian,
and Spanish
•The User’s Manuals for optional
paper stackers
•Printer drivers
The CD-ROM is in a plastic pocket in
the back cover.
Save this Setup Guide. If you move or
re-ship the printer in the future, you can
reverse the instructions in this guide to
repack the printer.
NOTICE
This document contains proprietary information protected by
copyright. No part of this document may be reproduced, copied,
translated, or incorporated in any other material in any form or by
any means, whether manual, graphic, electronic, mechanical, or
otherwise, without the prior written consent of Printronix, Inc.
Printronix makes no representations or warranties of any kind
regarding this material, including, but not limited to, implied
warranties of merchantability and fitness for a particular purpose.
Printronix shall not be held responsible for errors contained herein
or any omissions from this material or for any damages, whether
direct or indirect, incidental or consequential, in connection with the
furnishing, distribution, performance, or use of this material. The
information in this manual is subject to change without notice.
COPYRIGHT 2006 PRINTRONIX, INC.
5
Table of Contents
Choose a Space for the Printer....................................................7
Location of Printer Components...................................................9
Front of the Printer ...............................................................9
The Operator Panel............................................................10
Components on the Right Side of the Printer.....................11
Components on the Left Side of the Printer .......................12
Components on the Back of the Printer .............................13
Components Inside the Printer's Door ...............................13
Components Inside the Printer...........................................14
Unpack the Cardboard Buffer ....................................................16
Remove the Orange Tape Strips ...............................................16
Install the Fuser Cleaning Roller, Ozone Filter, & Power Cord ..20
Install the Developer Mix............................................................23
Initialize the Developer Unit .......................................................31
Install and Remove the Seal From the Toner Cartridge.............32
Load Paper.................................................................................37
Make A Test Print.......................................................................40
Contact Information....................................................................41
Printronix Customer Support Center ..................................41
Printronix Supplies Department..........................................41
Corporate Offices ...............................................................42
For More Information..................................................................43
Notices .......................................................................................44
Trademarks................................................................................47
Regulatory Information...............................................................47
Table of Contents
6
7
Basic Setup
This Quick Setup Guide shows you how to set up and test your
L7032 printer. For information on configuring the printer for use with
a computer or network, attaching the data cable, ordering spare
consumables, etc., refer to the User’s Manual, which is on the CD-
ROM attached to the back cover of this guide.
The fact that you are reading this means you have unpacked your
printer from the shipping carton and removed the plastic bag and
accessories. You will now select a printer site, prepare the printer
for operation, and print a test page.
Choose a Space for the Printer
Figure 1 shows the minimum clearances you need to install,
operate, and maintain the printer. You need a space at least 80
inches (2032 mm) wide—more if you have the optional power
paper stacker—and 55 inches (1397 mm) deep:
1. You need at least 28 inches (711.2 mm) at the front of the
printer to open the front access door and replace consumables.
2. You need at least 28 inches (711.2 mm) on the paper-input
side of the printer to load paper.
3. You need at least 28 inches (711.2 mm) on the paper-exit side
of the printer to stack and remove the printed media.
If you are using the optional power paper stacker, leave
sufficient room for it.
4. Leave at least six inches (152.4 mm) between the back of the
printer and the wall to allow air circulation. The printer's fans
vent air out the back of the printer.
Choose a Space for the Printer
8
NOTE: Direct sunlight will not damage the printer. Direct sunlight
may change the color of the printer's plastic surfaces as it
would change the color of any plastic surface.
Figure 1. Correct Printer Positioning
9
Front of the Printer
Location of Printer Components
This section show the components of your printer. Please review
the illustrations so you will be familiar with the printer's components
as you set up and operate the printer.
Front of the Printer
Figure 2 shows the components on the front of the printer. The use
of the words LEFT and RIGHT assumes you are viewing the front
of the printer, unless otherwise noted. For example, the paper
enters on the RIGHT side of the printer and exits on the LEFT side
of the printer.
Figure 2. The Front of the Printer
Location of Printer Components
10
The Operator Panel
Figure 3 shows the buttons on the operator panel, which is on the
top front of the printer.
Using the Shift button, there are also the following functions:
•Shift/Left Arrow ;= Feed paper forward
•Shift/Up Arrow == Exit
•Shift/Down Arrow >= Enter
•Shift/Right Arrow <= Feed paper backward
Figure 3 also shows the three status lights on the operator panel:
Ready, Data, and On Line
The operator panel displays messages, menus, and printing
parameters on a liquid crystal display (LCD).
Figure 3. Operator Panel
For more information about the operator panel, see Chapter 2,
Printer Operation, in the printer User’s Manual.
Autres manuels pour L7032
2
Table des matières
Autres manuels Printronix Imprimante
Printronix
Printronix T5000 Series Manuel utilisateur
Printronix
Printronix T8000 Manuel d'utilisation et d'entretien
Printronix
Printronix P7000 H-Series Manuel utilisateur
Printronix
Printronix MVP Series Manuel utilisateur
Printronix
Printronix LP844C Manuel utilisateur
Printronix
Printronix T5000e series Manuel utilisateur
Printronix
Printronix T6000 Manuel d'utilisation et d'entretien
Printronix
Printronix T5000 Series Guide de démarrage rapide
Printronix
Printronix P300 Manuel utilisateur
Printronix
Printronix P9212 Manuel utilisateur
Printronix
Printronix P5000LJ Series Manuel utilisateur
Printronix
Printronix P6000 series Manuel utilisateur
Printronix
Printronix 300 Instructions d'utilisation
Printronix
Printronix 300 Manuel utilisateur
Printronix
Printronix MVP 150 Manuel utilisateur
Printronix
Printronix P5000LJ Series Manuel utilisateur
Printronix
Printronix T600 Manuel d'utilisation et d'entretien
Printronix
Printronix P7000 H-Series Manuel utilisateur
Printronix
Printronix SMARTLINE SL4M Manuel utilisateur
Printronix
Printronix T2N series Manuel utilisateur
