Presys TY-2090 Manuel utilisateur

Autres manuels pour TY-2090

Table des matières

Autres manuels Presys Émetteur

Presys

Presys TY-2090 Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur

Universal

Smart Transmitter

TY-2090

EM0319-00

TECHNICAL MANUAL

Energy

presys

Universal

presys

Universal

Smart Transmitter

presys

Smart Transmitter

presys

CAUTION!

In case of failure, the instrument can provide AC voltage levels in its metal box,

which for safety reasons must always be connected to an effective ground point. To

this end a suitable terminal is provided on the back of the box identified as GND. Never

connect this terminal to the neutral terminal of power supply.

It is recommended the use of an external fuse (2 A) on the power input of the

instrument. There is an internal fuse.

Operation of relays - Important Note!

When the instrument has relay module for alarm or control, you must follow the

instructions in this manual in the maintenance section on the snubber use.

The snubber is a protection against noise coming from the opening / closing of

the relay contacts, but depending on the application may be necessary to remove this

snubber!

CAUTION!

The instrument described in this manual is a device for use in specialized

technical area. The user is responsible for configuration and selection of values of the

instrument parameters. The manufacturer warns of the risks of occurrences with

damage to both the person and the property resulting from the incorrect use of the

instrument. The information and specifications in this manual are subject to change

without previous notice.

presys

In case of failure, the instrument can provide AC voltage levels in its metal box,

presys

In case of failure, the instrument can provide AC voltage levels in its metal box,

which for safety reasons must always be connected to an effective ground point. To

presys

which for safety reasons must always be connected to an effective ground point. To

this end a suitable terminal is provided on the back of the box identified as GND. Never

presys

this end a suitable terminal is provided on the back of the box identified as GND. Never

It is recommended the use of an external fuse (2 A) on the power input of the

presys

It is recommended the use of an external fuse (2 A) on the power input of the

Operation of relays - Important Note!

presys

Operation of relays - Important Note!

When the instrument has relay module for alarm or control, you must follow the

presys

When the instrument has relay module for alarm or control, you must follow the

instructions in this manual in the maintenance section on the snubber use.

presys

instructions in this manual in the maintenance section on the snubber use.

The snubber is a protection against noise coming from the opening / closing of

presys

The snubber is a protection against noise coming from the opening / closing of

the relay contacts, but depending on the application may be necessary to remove this

presys

the relay contacts, but depending on the application may be necessary to remove this

CAUTION!

presys

CAUTION!

The instrument described in this manual is a device for use in specialized

presys

The instrument described in this manual is a device for use in specialized

technical area. The user is responsible for configuration and selection of values of the

presys

technical area. The user is responsible for configuration and selection of values of the

instrument parameters. The manufacturer warns of the risks of occurrences with

presys

instrument parameters. The manufacturer warns of the risks of occurrences with

damage to both the person and the property resulting from the incorrect use of the

presys

damage to both the person and the property resulting from the incorrect use of the

instrument. The information and specifications in this manual are subject to change

presys

instrument. The information and specifications in this manual are subject to change

without previous notice.

presys

without previous notice.

PRESYS Instruments TY-2090-Energy

EM0319-00

Table of Contents

1.0 - Introduction ............................................................................................................1

1.1 - Description............................................................................................................1

1.2 - Order Code...........................................................................................................2

1.3 - Technical Specifications........................................................................................3

2.0 - Installation ..............................................................................................................5

2.1 - Mechanical Installation..........................................................................................5

2.2 - Electrical Installation .............................................................................................5

2.3 - Process Input Signal Connections ........................................................................6

2.3.1 - RTD Connections...........................................................................................7

2.3.2 - Current Input ..................................................................................................8

2.3.3 - Voltage Inputs ................................................................................................9

2.4 - Output Connections ............................................................................................10

2.5 - Connection Diagram ...........................................................................................12

2.6 - Communication...................................................................................................13

2.7 - Engineering Units................................................................................................13

3.0 - Operation ..............................................................................................................14

3.1 - Normal Operation................................................................................................14

3.2 - Configuration.......................................................................................................17

4.0 - Maintenance..........................................................................................................30

4.1 - Hardware ............................................................................................................30

4.2 - Hardware Configuration ......................................................................................32

4.3 - Using Snubber with relays...................................................................................33

4.4 - Optional Modules Installation..............................................................................34

4.5 - Calibration...........................................................................................................37

4.6 - Hardware Maintenance Instructions....................................................................42

4.7 - List of Components.............................................................................................44

4.8 - List of Recommended Spare Components .........................................................47

5.0 - MODBUS Communication....................................................................................48

5.1 - List of MODBUS Communication Registers........................................................48

5.2 - List of Communication Coils ...............................................................................52

presys

................................

presys

................................

............

presys

............

................................

presys

................................

............

presys

............

presys

................................

presys

................................

presys

................................

...........

presys

...........

presys

................................

presys

................................

........................

presys

........................

presys

................................

presys

................................

presys

................................

..............

presys

..............

presys

................................

presys

................................

..........................

presys

..........................

presys

................................

presys

................................

.............................

presys

.............................

................................

presys

................................

presys

................................

........

presys

........

................................

presys

................................

presys

................................

...........................

presys

...........................

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

............................

presys

............................

................................

presys

................................

presys

................................

...........................

presys

...........................

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

presys

................................

3.1 - Normal Operation

presys

3.1 - Normal Operation

................................

presys

................................

presys

................................

presys

................................

presys

................................

4.0 - Maintenance

presys

4.0 - Maintenance

................................

presys

................................

presys

................................

4.1 - Hardware

presys

4.1 - Hardware

................................

presys

................................

presys

................................

4.2 - Hardware Configuration

presys

4.2 - Hardware Configuration

................................

presys

................................

4.3 - Using Snubber with relays

presys

4.3 - Using Snubber with relays

................................

presys

................................

4.4 - Optional Modules Installation

presys

4.4 - Optional Modules Installation

................................

presys

................................

4.5 - Calibration

presys

4.5 - Calibration

................................

presys

................................

presys

................................

4.6 - Hardware Maintenance I

presys

4.6 - Hardware Maintenance I

nstructions

presys

nstructions

4.7 -

presys

4.7 -

List of Components

presys

List of Components

................................

presys

................................

4.8 -

presys

4.8 -

List of Recommended Spare Components

presys

List of Recommended Spare Components

5.0 - MODBUS Communication

presys

5.0 - MODBUS Communication

................................

presys

................................

5.1 - List of MODBUS Communication Registers

presys

5.1 - List of MODBUS Communication Registers

5.2 - List of Communication Coils

presys

5.2 - List of Communication Coils

PRESYS Instruments TY-2090-Energy

Introduction

Page 1

1.0 - Introduction

1.1 - Description

The TY-2090-Energy transmitter is ideal for security applications in turbines,

hydroelectric plants and thermoelectric generators. It is a microprocessor-based

instrument which receives any process variable found in industrial plants such as:

temperature, pressure, flow, level etc. Ithas a non-volatile internal memory (E2PROM)

for storing calibration values.

It can communicate with acomputer through an optional RS-232 or RS-422/485

Communication Module. The Transmitter is capable of monitoring two

universal standard inputs, accepting direct connection

of thermocouples, RTDs, current (mAdc) and voltage

(mVdc, Vdc). The RTD inputs are automatically

linearized by means of tables stored in the EPROM. A

24 Vdc power supply,isolated from the output and

with short circuit protection, is provided to power up

standard field two-wire instruments.

The type of input selected by the user is

enabled by jumpers and by configuration via software.

All configuration data can be protected by a password

system and are stored in the non-volatile memory in

case of power failure.

Designed within the concept of modularity, the

transmitter accepts up to 4 output cards. The possible

output types are analog, SPDT relay, SPST relay,

solid-state relay and open collection voltage.

In case of input sensor breaking, the trip alarms

are not triggered (configurable for 4-20 mA and RTD

inputs) and the analog outputs assume preconfigured

safety values. The alarm outputs can be

independently configured to work in latch mode,

demanding the acknowledgement by the operator

through the MCY-20 configurator keys or via

communication in order to be disabled after the

return of the process variable to the normal

condition. The outputs are electrically isolated from

the inputs. In addition to the high and low alarms, the

transmitter can be set for failure alarms (watchdog) triggered by the detectionof broken

sensors connected to the current or RTD inputs.

It allows the use of a universal power supply from 75 to 264 Vac 50/60Hz or 100

to 360 Vdc (any polarity).

The instrument has an extruded aluminum case which makes it highly immune to

electrical noise, electromagnetic interference and resistant to the most severe conditions

of industrial usage.

Fig. 1 -Front view of the

TY-2090-Energy Transmitter

presys

-Energy transmitter is ideal for security applications in turbines,

presys

-Energy transmitter is ideal for security applications in turbines,

is a microprocessor-based

presys

is a microprocessor-based

instrument which receives any process variable found in industrial plants such as:

presys

instrument which receives any process variable found in industrial plants such as:

-volatile internal memory (E2PROM)

presys

-volatile internal memory (E2PROM)

presys

optional

presys

optional

presys

-232 or RS-422/485

presys

-232 or RS-422/485

The Transmitter is capable of monitoring two

presys

The Transmitter is capable of monitoring two

universal standard inputs, accepting direct connection

presys

universal standard inputs, accepting direct connection

of thermocouples, RTDs, current (mAdc) and voltage

presys

of thermocouples, RTDs, current (mAdc) and voltage

(mVdc, Vdc). The RTD inputs are automatically

presys

(mVdc, Vdc). The RTD inputs are automatically

rized by means of tables stored in the EPROM. A

presys

rized by means of tables stored in the EPROM. A

Vdc power supply

presys

Vdc power supply

presys

isolated from the output and

presys

isolated from the output and

with short circuit protection, is provided to power

presys

with short circuit protection, is provided to power

standard field two-wire instruments.

presys

standard field two-wire instruments.

The type of input selected by the user is

presys

The type of input selected by the user is

enabled

presys

enabled

by jumpers and by configuration via software.

presys

by jumpers and by configuration via software.

All configuration data can be protected by a password

presys

All configuration data can be protected by a password

system and are stored in the non-volatile memory in

presys

system and are stored in the non-volatile memory in

case of power failure.

presys

case of power failure.

Designed with

presys

Designed with

presys

the concept of modularity, t

presys

the concept of modularity, t

transmitter accepts up to 4 output cards. The poss

presys

transmitter accepts up to 4 output cards. The poss

output types are analog, SPDT relay, SPST relay,

presys

output types are analog, SPDT relay, SPST relay,

solid-state relay and open collection voltage.

presys

solid-state relay and open collection voltage.

In case of input sensor break

presys

In case of input sensor break

are not triggered (configurable for 4-

presys

are not triggered (configurable for 4-

inputs) and the analog outputs assume preconfigured

presys

inputs) and the analog outputs assume preconfigured

presys

afety values. The alarm outputs can be

presys

afety values. The alarm outputs can be

independently

presys

independently

demanding the acknowledgement by the operator

presys

demanding the acknowledgement by the operator

through the MCY-

presys

through the MCY-

communication in order to be disabled after the

presys

communication in order to be disabled after the

transmitter can

presys

transmitter can

presys

set for failure alarms (watchdog) triggered by the detectio

presys

set for failure alarms (watchdog) triggered by the detectio

sensors connected to the current or RTD

presys

sensors connected to the current or RTD

It allows the use of a universal power supply from

presys

It allows the use of a universal power supply from

presys

360 Vdc (any polarity

presys

360 Vdc (any polarity

The instrument

presys

The instrument

electrical noise, electromagnetic interference and resistant to the most severe conditions

presys

electrical noise, electromagnetic interference and resistant to the most severe conditions

of industrial usage.

presys

of industrial usage.

presys

Fig

presys

Fig

. 1

presys

. 1

presys

Front view of

presys

Front view of

the

presys

the

presys

2090

presys

2090

presys

Energy

presys

Energy

Transmitter

presys

Transmitter

PRESYS Instruments TY-2090-Energy

Introduction

Page 2

1.2 - Order Code

TY -2090

Field A Output 1 (Retransmission or Alarm)

None

4to 20 mAdc

1to 5 Vdc

0 to 10 Vdc

SPST Relay

Open Collector Voltage

Solid State Relay

Field B

Output 2 (Retransmission or Alarm)

Same code as Output 1

Field C

Output 3 (Alarm ortrip)

None

SPDT Relay

Open Collector Voltage

Solid State Relay

Field D Output 4 (Alarm ortrip)

Same code as Output 3

Field E

Power Supply

75 to 264 Vac 50/60Hz or100 to 360 Vdc (any polarity)

24 Vac or 24 Vdc (



10 %)

12 Vdc (



10 %)

Other, upon request

Field F

Communication

None

RS-232

RS-485

RS-422

Field G

Case Protection Grade

General usage, sheltered place, surface mounting

General usage, sheltered place, DIN rail mounting

Weather-proof

Explosion-proof (BR-Ex d IIB T6 IP 65), without display (*)

Dust proof

(*) Explosion proof box:

Dimensions: 310x310x200 mm (HxWxD)

Weight: 11kg nominal

Field H

Application

Energy

presys

(Retransmission or Alarm)

presys

(Retransmission or Alarm)

presys

trip

presys

trip

)

presys

)

ollector

presys

ollector

presys

oltage

presys

oltage

tate Relay

presys

tate Relay

Output

presys

Output

4 (Alarm o

presys

4 (Alarm o

presys

trip

presys

trip

)

presys

)

Same code as Output

presys

Same code as Output

presys

Power Supply

presys

Power Supply

presys

264 V

presys

264 V

presys

c 50/60Hz o

presys

c 50/60Hz o

presys

100

presys

100

presys

360 V

presys

360 V

24 V

presys

24 V

presys

24 V

presys

24 V

presys

c (

presys

c (



presys



presys

12 V

presys

12 V

presys

c (

presys

c (



presys



presys

Other,

presys

Other,

upon request

presys

upon request

Field

presys

Field

presys

Com

presys

Com

munication

presys

munication

presys

one

presys

one

presys

232

presys

232

presys

485

presys

485

presys

422

presys

422

Field

presys

Field

presys

Case Protection Grade

presys

Case Protection Grade

presys

General usag

presys

General usag

presys

General usage, sheltered place,

presys

General usage, sheltered place,

presys

Weather

presys

Weather

presys

Explosion

presys

Explosion

presys

Field

presys

Field

presys

PRESYS Instruments TY-2090-Energy

Introduction

Page 3

Note - Ranges and input types, the use of relays as alarms and alarm setpoints

are, among others, items that the user can program through the MCY-20 Configuration

Module (if desired, specify such information so that all programming may be previously

done by PRESYS).

Note: Any other desired software or hardware feature may be available upon request.

Code Example:

1) TY - 2090 - 1 - 0 - 1- 0 - 1 - 0 - 0 - E

This code defines a TY-2090-Energy transmitter with output 1for 4-20 mA,

output 2not used, SPDT relay for use as alarm with configurable trip function, power

supply for the range 75-264 Vac 50/60Hz or 100-360 Vdc, without serial communication,

for use in a sheltered place and surface mounting.

1.3 - Technical Specifications

Inputs:

Pt-100 RTD under DIN 43760, 4 to 20 mA, 0 to 500 mVdc, 1 to 5 Vdc, 0 to

10 Vdc. Input impedance of 250 for mA, 10 Mfor 5 Vdc and 2 Mabove

5 Vdc. Table 1 shows the temperature ranges for RTD and the resolution for

linear input sensors.

Input sensor Range

RTD

lower limit



upper limit



lower limit



upper limit



Pt-100 (2 or 3wires)

-346.0

752.0

-210.0

400.0*

Linear Range Resolution

Voltage

0to 500 mV



0to 5 V

250



0to 10 V

500



Current

0to 20 mA



(*)including wire resistance

Table 1 - Input Sensor Measuring Range

Note: The specifications in Table 1 refer to analog/digital conversion and are accessed

by RS-232 and RS-422/485 serial communication. For the analog outputs, the resolution

is 0.075 % of full scale.

presys

Module (if desired, specify such information so that all programming may be previously

presys

Module (if desired, specify such information so that all programming may be previously

Note: Any other desired software or hardware feature may be available upon request.

presys

Note: Any other desired software or hardware feature may be available upon request.

-Energy transmitter with output

presys

-Energy transmitter with output

presys

for 4-

presys

for 4-

presys

mA,

presys

mA,

not used, SPDT relay for use as alarm with configurable trip function, power

presys

not used, SPDT relay for use as alarm with configurable trip function, power

50/60Hz or 100-360 V

presys

50/60Hz or 100-360 V

presys

, without serial communication,

presys

, without serial communication,

RTD under DIN 43760, 4 to 20 mA, 0 to 500 mVdc, 1 to 5 Vdc, 0 to

presys

RTD under DIN 43760, 4 to 20 mA, 0 to 500 mVdc, 1 to 5 Vdc, 0 to

Vdc. Input impedance of 250

presys

Vdc. Input impedance of 250



presys



for mA, 10 M

presys

for mA, 10 M



presys



for 5 Vdc and 2 M

presys

for 5 Vdc and 2 M

5 Vdc. Table 1 shows the temperature ranges for RTD and the resolution for

presys

5 Vdc. Table 1 shows the temperature ranges for RTD and the resolution for

Range

presys

Range

presys

lower limit

presys

lower limit



presys



presys

upper limit

presys

upper limit



presys



presys

lower limit

presys

lower limit

presys

)

presys

)

presys

346

presys

346

presys

752

presys

752

presys

Range

presys

Range

presys

Voltage

presys

Voltage

presys

to 500 mV

presys

to 500 mV

presys

5 V

presys

5 V

presys

10 V

presys

10 V

presys

rrent

presys

rrent

presys

20 mA

presys

20 mA

presys

including wire resistance

presys

including wire resistance

presys

Table 1 - Input Sensor Measuring Range

presys

Table 1 - Input Sensor Measuring Range

Note: The specifications in Table 1 refer to analog/digital conversion and are accessed

presys

Note: The specifications in Table 1 refer to analog/digital conversion and are accessed

by RS-232 and RS-422/485 serial communication. For the analog outputs, the resolution

presys

by RS-232 and RS-422/485 serial communication. For the analog outputs, the resolution

is 0.075 % of full scale.

presys

is 0.075 % of full scale.

PRESYS Instruments TY-2090-Energy

Introduction

Page 4

Outputs:

Analog retransmitter output for 4-20 mA, 1 to 5 Vdc, 0 to 10 Vdc, use of

optional cards, with installation of up to two modules, galvanically isolated

(300 Vac)from inputs and power supply.

Alarm outputs for up to two SPDT relays and two SPST relays rated

3 A/220 Vac.

Logic Level, open collector transistor, 24 Vdc, 40 mA maximum with isolation.

Solid-state relay, rated 2A/250 Vac with isolation.

Serial Communication:

RS-232 or RS-422/485 with 50 Vdc isolation, as an optional module installed on

the CPU board. MODBUS®- RTU Communication Protocol.

Configuration:

Via RS-232,RS-422/485 serial communication or the MCY-20 Configuration

Module.

Scanning Time:

120 ms, standard.

Accuracy:

0.1 % of full scale for RTD, mA, mV and Vinputswith acquisition via RS-232

and RS-422/485 serial communication.

0.2 % of full scale for analog outputs and 750 maximum load.

Linearization:

0.1 Cfor RTD.

Square Root Extraction:

0.5 % of reading for input above 10 % of span.

0 to 5 % programmable cut-off.

Stability at ambient temperature:

0.005 % / ºC of span referred to 25 ºC ambient temperature for acquisition via

RS-232 and RS-422/485.

0.015 % /ºC of span referred to 25 ºC ambient temperature for analog outputs.

Power Supply:

75 to 264 Vac 50/60Hz or 100 to 360 Vdc (any polarity), 10 W nominal; 24 Vac/dc

(10 %); 12 Vdc (10 %).

2-Wire Transmitter Power Supply:

24 Vdc voltage and 50 mA maximum, isolated from outputs, with short-circuit

protection.

Operating ambient:

0 to 50ºC temperature and 90% maximum relative humidity.

Dimensions:

140 mm x 53 mm x 175 mm (HxWxD).

Weight:

0.5 kg nominal.

Warranty:

One year.

presys

Analog retransmitter output for 4-20 mA, 1 to 5 Vdc, 0 to 10 Vdc, use of

presys

Analog retransmitter output for 4-20 mA, 1 to 5 Vdc, 0 to 10 Vdc, use of

optional cards, with installation of up to two modules, galvanically isolated

presys

optional cards, with installation of up to two modules, galvanically isolated

two SPST relays rated

presys

two SPST relays rated

Logic Level, open collector transistor, 24 Vdc, 40 mA maximum with isolation.

presys

Logic Level, open collector transistor, 24 Vdc, 40 mA maximum with isolation.

Vdc isolation, as an optional module installed

presys

Vdc isolation, as an optional module installed

presys

- RTU Communication Protocol.

presys

- RTU Communication Protocol.

-422/485 serial communication or the MCY-20 Configurati

presys

-422/485 serial communication or the MCY-20 Configurati

presys

0.1 % of full scale for RTD, mA, mV

presys

0.1 % of full scale for RTD, mA, mV

and

presys

and

presys

input

presys

input

presys

with acquisition via

presys

with acquisition via

and RS-422/485 serial communication.

presys

and RS-422/485 serial communication.

0.2 % of full scale for analog outputs and 750

presys

0.2 % of full scale for analog outputs and 750



presys



maximum load.

presys

maximum load.

0.5 % of reading for input above 10 % of span.

presys

0.5 % of reading for input above 10 % of span.

0 to 5 % programmable cut-off.

presys

0 to 5 % programmable cut-off.

Stability at ambient temperature:

presys

Stability at ambient temperature:

0.005 % / ºC of span referred to

presys

0.005 % / ºC of span referred to

presys

ºC ambient temperature for acquisition via

presys

ºC ambient temperature for acquisition via

-232 and RS-422/485.

presys

-232 and RS-422/485.

0.015 %

presys

0.015 %

presys

ºC of span referred to 25 ºC ambient temperature for analog outputs.

presys

ºC of span referred to 25 ºC ambient temperature for analog outputs.

Power Supply:

presys

Power Supply:

presys

264 Vac 50/60Hz or

presys

264 Vac 50/60Hz or

100

presys

100

presys

360 Vdc (any polarity), 10 W nominal; 24 Vac/dc

presys

360 Vdc (any polarity), 10 W nominal; 24 Vac/dc

(

presys

(



presys



presys

%); 12 Vdc (

presys

%); 12 Vdc (



presys



presys

%).

presys

%).

2-Wire Transmitter Power Supply:

presys

2-Wire Transmitter Power Supply:

24 Vdc voltage and 50 mA maximum, isolated from outputs, with short-circuit

presys

24 Vdc voltage and 50 mA maximum, isolated from outputs, with short-circuit

protection.

presys

protection.

Operating ambient:

presys

Operating ambient:

0 to 50ºC temperature and 90% maximum relative humidity.

presys

0 to 50ºC temperature and 90% maximum relative humidity.

Dimens

presys

Dimens

ion

presys

ion

presys

140 mm x 53 mm x 175 mm (HxWxD

presys

140 mm x 53 mm x 175 mm (HxWxD

Weight:

presys

Weight:

presys

0.5 kg nominal.

presys

0.5 kg nominal.

One year.

presys

One year.

PRESYS Instruments TY-2090-Energy

Installation

Page 5

2.0 - Installation

2.1 - Mechanical Installation

The TY-2090-Energy Transmitter can be mounted on a surface or on all types of

existing DIN rails,by means of an optional adapter, as illustrated in the figure below.

Fig. 2 - Dimensional drawing and detail of the adapter for DIN rail

2.2 - Electrical Installation

The TY-2090-Energy Transmitter may be powered up by voltage between 75 and

264 Vac or 100 to 360 Vdc, any polarity. Remember that the internal circuit is powered

whenever the instrument is connected to the external power supply.

Connections of process input and output signals should only be done with the

instrument turned off.

Figure 3 shows the instrument I/O terminal scheme with all designations for power

supply, grounding, communication and process input and output signals.

Signal wires must be kept far away from power supply wires.

Due to its metal case the instrument ground should be connected to earth

ground. Never connect the ground to the neutral terminal.

presys

-Energy Transmitter can be mounted on a surface or on all types of

presys

-Energy Transmitter can be mounted on a surface or on all types of

by means of an optional adapter, as illustrated in the figure below.

presys

by means of an optional adapter, as illustrated in the figure below.

presys

Fig. 2 - Dimensional drawing and detail of the adapter for DIN rail

presys

Fig. 2 - Dimensional drawing and detail of the adapter for DIN rail

2.2 - Electrical Installation

presys

2.2 - Electrical Installation

The TY-

presys

The TY-

2090

presys

2090

-Energy Transmitter may be powered

presys

-Energy Transmitter may be powered

264

presys

264

Vac or 100 to 360 Vdc, any polarity. Remember that the internal circuit is powered

presys

Vac or 100 to 360 Vdc, any polarity. Remember that the internal circuit is powered

whenever the instrument is connected to the external power supply.

presys

whenever the instrument is connected to the external power supply.

Connections of process input and output signals should only be

presys

Connections of process input and output signals should only be

instrument turned off.

presys

instrument turned off.

Figure 3 shows the instrument I/O terminal scheme with all designations for power

presys

Figure 3 shows the instrument I/O terminal scheme with all designations for power

supply, grounding, communication and process input and output signals.

presys

supply, grounding, communication and process input and output signals.

Signal wires must be kept far away from power supply wires.

presys

Signal wires must be kept far away from power supply wires.

Due to its metal case the instrument ground should be connected to earth

presys

Due to its metal case the instrument ground should be connected to earth

ground.

presys

ground.

Never

presys

Never

connect the ground to the neutral terminal.

presys

connect the ground to the neutral terminal.

PRESYS Instruments TY-2090-Energy

Installation

Page 6

Fig. 3 - Transmitter terminals

2.3 - Process Input Signal Connections

The Transmitter, in its two standard universal inputs, can be connected to 2 or

3-wire RTDs, mA, mV or V. In order to know the input sensor types refer to Table 1,

section 1.3 on Technical Specifications.

The selection of a certain type of input sensor is enabled by means of

internal jumpers (refer to section 4.2, Hardware Configuration) and by aproper

selection of the sensor in configuration time (refer to section 3.2, Configuration).

Therefore, the connections explained below will only become effective if the

instrument is correctly configured in terms of hardware and software.

The wiring of a type of sensor to input 1 does not restrict the simultaneous use of

another sensor, of the same type or different type, for input 2.

In order to prevent noise induction in the wire connecting the sensor to the I/O

terminal, use twisted pair cable and run the sensor connection wires through a metallic

conduit or use a shielded cable. Be sure to connect only one shielded wire end to the

negative I/O terminal or to the sensor ground, as outlined in the following items.

WARNING: GROUNDING TWO SHIELD WIRE ENDS MAY CAUSE NOISE IN

THE TRANSMITTER.

presys

Fig. 3 - Transmitter terminals

presys

Fig. 3 - Transmitter terminals

Process Input Signal Connections

presys

Process Input Signal Connections

The Transmitter, in its two standard universal inputs, can be connected to 2 or

presys

The Transmitter, in its two standard universal inputs, can be connected to 2 or

3-wire RTDs, mA, mV or V. In order to know the input sensor types refer to Table 1,

presys

3-wire RTDs, mA, mV or V. In order to know the input sensor types refer to Table 1,

section 1.3 on Technical Specifications.

presys

section 1.3 on Technical Specifications.

The selection of a certain type of input sensor is enabled by means of

presys

The selection of a certain type of input sensor is enabled by means of

internal jumpers (refer to section 4.2, Hardware Configuration) and by

presys

internal jumpers (refer to section 4.2, Hardware Configuration) and by

selection of the sensor in configuration time (refer to section 3.2, Configuration).

presys

selection of the sensor in configuration time (refer to section 3.2, Configuration).

Therefore, the connections explained below will only become effective if the

presys

Therefore, the connections explained below will only become effective if the

instrument is correctly configured in terms of hardware and software.

presys

instrument is correctly configured in terms of hardware and software.

The wiring of a type of sensor to input 1 does not restrict the simultaneous use of

presys

The wiring of a type of sensor to input 1 does not restrict the simultaneous use of

another sensor, of the same type or different type, for input 2.

presys

another sensor, of the same type or different type, for input 2.

In order to prevent noise induction in the wire connecting the sensor to the I/O

presys

In order to prevent noise induction in the wire connecting the sensor to the I/O

terminal, use twisted pair cable and run the sensor connection wires through a metallic

presys

terminal, use twisted pair cable and run the sensor connection wires through a metallic

presys

conduit or use a shielded cable. Be sure to connect only one shielded wire end to the

presys

conduit or use a shielded cable. Be sure to connect only one shielded wire end to the

negative I/O terminal or to the sensor ground, as outlined in the following items.

presys

negative I/O terminal or to the sensor ground, as outlined in the following items.

WARNING: GROUNDING TWO SHIELD WIRE ENDS MAY CAUSE NOISE IN

presys

WARNING: GROUNDING TWO SHIELD WIRE ENDS MAY CAUSE NOISE IN

THE TRANSMITTER.

presys

THE TRANSMITTER.

PRESYS Instruments TY-2090-Energy

Installation

Page 7

2.3.1 - RTD Connections

The RTD can be connected with 2, 3 or 4 wires. All connection types are shown in

figure 4.

For 2-wire RTD, connect the RTD between I/O terminals 1 and 3 to use input 1, or

to terminals 4 and 6 to use input 2, as illustrated in figure 4.

For 3-wire RTD, connect the RTD in the same way as described for a 2-wire

connection, and connect the third wire for RTD compensation to terminal 2 in case of

input 1, and to terminal 5 in case of input 2, see figure 4.

A 4-wire RTD is connected to the Transmitter in the same way as a 3-wire RTD,

except that the fourth wire is disregarded and left disconnected, see figure 4.

A 3-wire RTD provides greater accuracy than a 2-wire RTD.

The RTD wiring should be of the same material, length and gauge to ensure

proper resistance compensation of connecting wires. The maximum resistance of

connecting wires is 10 per wire. The minimum gauge should be 18 AWG for distances

up to 50 meters and 16 AWG for distances greater than 50 meters.

Fig. 4 - RTD Connection

presys

The RTD can be connected with 2, 3 or 4 wires. All connection types are shown in

presys

The RTD can be connected with 2, 3 or 4 wires. All connection types are shown in

For 2-wire RTD, connect the RTD between I/O terminals 1 and 3 to use input 1, or

presys

For 2-wire RTD, connect the RTD between I/O terminals 1 and 3 to use input 1, or

For 3-wire RTD, connect the RTD in the same way as described for a 2-wire

presys

For 3-wire RTD, connect the RTD in the same way as described for a 2-wire

connection, and connect the third wire for RTD compensation to terminal 2 in case of

presys

connection, and connect the third wire for RTD compensation to terminal 2 in case of

A 4-wire RTD is connected to the Transmitter in the same way as a 3-wire RTD,

presys

A 4-wire RTD is connected to the Transmitter in the same way as a 3-wire RTD,

except that the fourth wire is disregarded and left disconnected, see figure 4.

presys

except that the fourth wire is disregarded and left disconnected, see figure 4.

A 3-wire RTD provides greater accuracy than a 2-wire RTD.

presys

A 3-wire RTD provides greater accuracy than a 2-wire RTD.

presys

The RTD wiring should be of the same material, length and gauge to ensur

presys

The RTD wiring should be of the same material, length and gauge to ensur

proper resistance compensation of connecting wires. The maximum resistance of

presys

proper resistance compensation of connecting wires. The maximum resistance of

per wire. The minimum gauge should be 18 AWG for distances

presys

per wire. The minimum gauge should be 18 AWG for distances

up to 50 meters and 16 AWG for distances greater than 50 meters.

presys

up to 50 meters and 16 AWG for distances greater than 50 meters.

presys