Premier Mounts Nesting Cart Series Manuel utilisateur
PSD-VPS
Page - 1 - Installation Instructions
9532-005-111-01
PSD-VPS
NOTE: Please refer to the PSD-BW Base and RTM-L Installation Instructions for complete assembly
instructions.
1. Attach the support tubes to the PSD-BW base and tighten
the set screws with the supplied Allen wrench. 2. Attach the RTM-L mount to the support tubes and tighten the set
screws with the supplied Allen wrench.
Landscape Orientation Portrait Orientation
INSTALLATION MANUAL
PSD-BW/PSD-BWL
Nesting Cart Series
NORTH AMERICA EUROPE AUSTRALIA,NEW ZEALAND,
OCEANIA (Distributor)
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada –
Phone: 800-368-9700
Fax: 800-832-4888
Swallow House,
Shilton Industrial Estate,
Shilton, Coventry, England CV79JY
Phone: +44 (0) 2476 614700
Fax: +44 (0) 2476 614710
P.O. Box 295
Mordialloc Victoria 3195
Australia
Phone: 03 9586 6330
www.premiermounts.com.au
Other Locations – Phone: 001.714.632.7100; Fax: 001.714.632.1044
©Premier Mounts 2008
9532-003-011-01
PSD-BW/L
Installation Instructions Page - 2 -
Table of Contents
WARRANTY ....................................................................................................................................................- 2 -
CONTACT PREMIER MOUNTS ....................................................................................................................- 2 -
WARNING STATEMENTS .............................................................................................................................- 3 -
PARTS LIST ......................................................................................................................................................- 4 -
INSTALLATION TOOLS ................................................................................................................................- 4 -
BW BASE CASTOR INSTALLATION (FIGURE 1) ......................................................................................- 5 -
SUPPORT TUBE INSTALLATION (FIGURE 2) ...........................................................................................- 5 -
PSD-SPA INSTALLATION (FIGURE 3) ........................................................................................................- 6 -
PSD-BW/L NESTING CART STORAGE (FIGURE 4) ..................................................................................- 6 -
OPTIONAL MOUNTING CONFIGURATIONS .............................................................................................- 7 -
TECHNICAL SPECIFICATIONS ....................................................................................................................- 8 -
NOTES ...............................................................................................................................................................- 8 -
Warranty
Limited Lifetime Warranty
All Premier Mounts products carry a limited lifetime warranty from ship date against defects in materials and workmanship. Premier
Mounts is not liable for improper installation that results in damage to mounts, adapters, display equipment or
personal injury.
Contact Premier Mounts
In the event of missing and/or damage equipment, or technical questions, the following information can help in the completion of the
installation.
Customer Service – (800) 368-9700
Technical Support – techsupport@mounts.com
PSD-BW/L
Page - 3 - Installation Instructions
Warning Statements
PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY
PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED
OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT
RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION
OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO
ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
THE FLOOR STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST 250 LBS. IF NOT, THE
FLOOR STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A
QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST
BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN
DEATH.
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS
PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE ASSEMBLY PROCEDURE TO
PREVENT PERSONAL INJURY.
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE ASSEMBLY INSTRUCTIONS SHOULD BE
READ AND COMPLETELY UNDERSTOOD. THE ASSEMBLY INSTRUCTIONS MUST BE READ TO
PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE ASSEMBLY INSTRUCTIONS
IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE.
Indicates that the power plug is to be
disconnected from the power outlet.
Contact Premier Mounts with any questions.
Safety precautions must be taken at all times.
Warning and Caution statements.
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in
damage to the plasma display and/or damage to the mounting surface.
Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to
do so may result in damage to the display and could increase the risk of fire.
At least two qualified people should perform the assembly procedure. Injury and/or damage can result from dropping or
mishandling the display.
DO NOT ATTACH EQUIPMENT WEIGHING MORE THAN 75LBS. ABOVE THE 60” MARKED LINE ON
THE SUPPORT POLES. DOING SO MAY CAUSE THE NESTING CART TO TIP OVER, RESULTING IN
SEVERE PROPERTY DAMAGE AND/OR PERSONAL INJURY.
PSD-BW/L
Installation Instructions Page - 4 -
Parts List
Congratulations on purchasing the PSD-BW/PSD-BWL Nesting Cart. The PSD-BW/PSD-BWL Nesting Cart is shipped with all
proper installation hardware and components. Please verify that none of these parts are missing and/or damaged before assembly. If
there are parts missing and/or damaged, please stop the assembly and contact Premier Mounts (800) 368-7000.
Some mounting configurations will allow for a “landscape” orientation. In these situations, when moving the PSD-
BW/L Nesting Cart through a doorway, the orientation of the display must be returned to the “portrait” orientation. If
not, maneuvering through the doorway could prove costly by damaging the display.
BW Base (Qty 1)
PSD-SPA (Qty 1)
3” Castors (Qty 4)
(2 locking,
2 non-locking)
M8 x 10mm Set
Screws (Qty 6)
Support Tubes
(Qty 2)
NOTE: Length will
vary depending on
model purchased.
M10 Flat Washers
(Qty 4)
M10 x 12mm Hex
Head Screws
(Qty 4)
21mm Caster Wrench
(Qty 1)
Installation Tools
Socket head wrench Soft Material/ Blanket
M5 Allen Wrench (Supplied) 5/32” Allen Wrench (Supplied)
PSD-BW/L
Page - 5 - Installation Instructions
BW Base Castor Installation (Figure 1)
Unpack the PSD-BW/L Nesting Cart and review any WARNING statements that apply to the installation. Select the desired location
for the PSD-BW/L Nesting Cart.
Figure 1
1. Place the BW/L on a flat surface.
Make sure the locking castors (Qty 2) are attached to the rear legs of the Nesting Cart.
2. Insert each castor into the threaded mounting point located on the underside of the BW/L base (Figure 1). Turn each castor
clockwise to tighten. Make sure all four castors are tightened all the way until flush with the base. Tighten using the 21mm caster
wrench (supplied).
Support Tube Installation (Figure 2)
1. Place the BW/L on a flat surface.
2. Take the support tubes and slide them over the mounting clamps that are located on the Nesting Cart.
To perform the following step, the access holes that are located at the end of the support tubes must line up with the
set screw holes on the mounting clamps. The upper access holes will be used for cable management once the display
has been mounted to the support tubes.
3. Insert the set screws into each hole and tighten using the supplied M5 Allen Wrench (Figure 2).
Figure 2
Locking Castor
Non-Locking Castor
Support Tubes
PSD-BW/L Base
M5 Allen Wrench
M10 x 35mm Set
Screw
Access Holes
Mounting Clamps
PSD-BW/L
Installation Instructions Page - 6 -
PSD-SPA Installation (Figure 3)
Use of the PSD-SPA will depend on the mount that is used. All PSM/CTM Series mounts require using the PSD-SPA.
The Revolution Series, USA and UFA Mounts, however, do not require the use of the PSD-SPA.
1. Slide the PSD-SPA over and down the support tubes.
2. Once the desired height has been determined, tighten the four (4) M8 x 10mm set screws, using the 5/32” Allen wrench (supplied)
to secure the PSD-SPA (Figure 3).
Figure 3
PSD-BW/L Nesting Cart Storage (Figure 4)
The PSD-BW/L is designed to maximize storage space. When storing multiple carts, slide the Nesting Carts together as close as
possible.
Please adhere to any WARNING statements that will apply to the different mounting configurations the PSD-BW/L
Nesting Cart will be used with.
Figure 4
5/32” Allen Wrench
Support Tubes
Support Tubes
PSD-SPA
PSD-BW/L
Page 7 Installation Instructions
Optional Mounting Configurations
CTM-Series Revolution Series
USA/UFA Series
PSD-BW/L
Installation Instructions Page 8
Technical Specifications
All measurements are in inches (mm).
Notes
PSD-BW PSD-BWL
INSTALLATION INSTRUCTIONS
Rotary Tilt Mount
Model: RTM-L
NORTH AMERICA
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada –
Phone: 800-368-9700
Fax: 800-832-4888
EUROPE
Swallow House,
Shilton Industrial Estate,
Shilton, Coventry, England CV79JY
Phone: +44 (0) 2476 614700
Fax: +44 (0) 2476 614710
AUSTRALIA, NEW ZEALAND, OCEANIA
(DISTRIBUTOR)
P.O. Box 295
Mordialloc Victoria 3195
Australia
Phone: 039586 6330
www.premiermounts.com.au
Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044
©Premier Mounts 2008
9531-009-011-03
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Premier Mounts Support et étagère
Premier Mounts
Premier Mounts INW-UNIFM Manuel utilisateur
Premier Mounts
Premier Mounts UMB-DBTS Manuel utilisateur
Premier Mounts
Premier Mounts PP-5 Manuel utilisateur
Premier Mounts
Premier Mounts CTM-600 Manuel utilisateur
Premier Mounts
Premier Mounts PSM-442T Manuel utilisateur
Premier Mounts
Premier Mounts Universal Projector Mount PBL-UMS Manuel utilisateur
Premier Mounts
Premier Mounts TTS-BASE-L Manuel utilisateur
Premier Mounts
Premier Mounts PRF Manuel utilisateur
Premier Mounts
Premier Mounts PBL-200 Manuel utilisateur
Premier Mounts
Premier Mounts BW-BASE Manuel utilisateur
Premier Mounts
Premier Mounts LPWS100 Manuel utilisateur
Premier Mounts
Premier Mounts AST-2446-2 Manuel utilisateur
Premier Mounts
Premier Mounts Polaris MAG-EXT Manuel utilisateur
Premier Mounts
Premier Mounts PBC- UMW Manuel utilisateur
Premier Mounts
Premier Mounts PCM-MS2 Manuel utilisateur
Premier Mounts
Premier Mounts AM80 Manuel utilisateur
Premier Mounts
Premier Mounts On-Wall Equipment GearBox UNI-GB Manuel utilisateur
Premier Mounts
Premier Mounts RTM Series Manuel utilisateur
Premier Mounts
Premier Mounts GB-PIPE1 Manuel utilisateur
Premier Mounts
Premier Mounts CTM-MS2 Manuel utilisateur
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
