PRECISION DIGITAL Javelin D PD644 Manuel utilisateur

PRECISION DIGITAL CORPORATION

233 South Street • Hopkinton MA01748 USA

Tel (800) 343-1001 • Fax (508) 655-8990

www.predig.com

Javelin D • Model PD644

Instruction Manual

•Measures DC Voltage up to 300 VDC

•4 Digit Display, 0.56" (14 mm) High, Red LEDs

•Maximum/Minimum Display

•NEMA 4X, IP65 Front

•4-20 mA Transmitter

•Universal Power Supply 85-265 VAC

•12-36 VDC/12-24 VAC Power Option

•Two Relays Option

•RS-485 Serial Communication

•Modbus®RTU Option

•Copy Meter Settings to Other Meters

Javelin D • Model PD644 Voltmeter Instruction Manual

Disclaimer

The information contained in this document is subject to change

without notice. Precision Digital Corporation makes no

representations or warranties with respect to the contents hereof,

and specifically disclaims any implied warranties of

merchantability or fitness for a particular purpose.

Registered Trademarks

Modbus®is a registered trademark of Schneider Automation Inc.

All other trademarks mentioned in this document are the property

of their respective owners.

Visit our Web Site

www.predig.com

Javelin D ●Model PD644 Voltmeter Instruction Manual

INTRODUCTION

The Javelin D is an easy to use digital voltmeter with built-in 4-20 mA

isolated transmitter and RS-485 serial communication capability. The

four front panel buttons provide quick and simple setup and programming.

The optional Form C relays can be used for alarm indication or process

control applications.

The Modbus®RTU serial communication upgrade enables the Javelin D

Digital Voltmeter to operate as a Modbus®slave in RS-485 multi-point

data acquisition systems.

ORDERING INFORMATION

85-265 VAC

Model 12-36 VDC

Model Options Installed

PD644-6R3-14 24 VDC Transmitter Supply

PD644-6R5-14 2 Relays, 24 VDC Supply

PD644-7R3-04 None

PD644-7R5-04 2 Relays

All models may be powered from AC or DC. See Specifications for details.

Accessories

Model Description

PDN-MODBUS Modbus®RTU upgrade

PDA7485-I RS-232 to RS-422/485 Isolated Converter

PDA7485-N RS-232 to RS-422/485 Non-Isolated Converter

PDA8485-I USB to RS-422/485 Isolated Converter

PDA8485-N USB to RS-422/485 Non-Isolated Converter

PDX6901 Suppressor (snubber): 0.01 µF/470 , 250 VAC

Plastic, steel, and stainless steel NEMA 4 and cast aluminum explosion-

proof enclosures are available to house up to ten meters.

Visit our web site for details on all accessories.

Javelin D ●Model PD644 Voltmeter Instruction Manual

Table of Contents

INTRODUCTION------------------------------------------------------------ 3

ORDERING INFORMATION--------------------------------------------- 3

SAFETY INFORMATION ------------------------------------------------- 6

SPECIFICATIONS---------------------------------------------------------- 7

General-------------------------------------------------------------------------------7

Voltage Measurement Input---------------------------------------------------8

Safety Compliance---------------------------------------------------------------8

Relays Option----------------------------------------------------------------------9

Isolated 4-20 mA Transmitter Output------------------------------------ 10

Serial Communications------------------------------------------------------- 10

INSTALLATION------------------------------------------------------------11

Unpacking------------------------------------------------------------------------- 11

Panel Mounting------------------------------------------------------------------ 11

Connections---------------------------------------------------------------------- 12

Connector Labeling ---------------------------------------------------------- 12

Power Connections ---------------------------------------------------------- 12

DC Voltage Measurement Connections -------------------------------- 13

Serial Communication------------------------------------------------------- 14

Relay Output Connections ------------------------------------------------- 14

Switching Inductive Loads-------------------------------------------------- 15

4-20 mA Output Signal Connections ------------------------------------ 16

SETUP AND PROGRAMMING ----------------------------------------17

Front Panel Buttons and Status LED Indicators--------------------- 18

Display Functions and Messages----------------------------------------- 19

Main Menu ------------------------------------------------------------------------ 21

Setting Numeric Values ------------------------------------------------------ 22

Setting Up the Meter (setu) ------------------------------------------------- 22

Setting the Relay Operation (rely)-------------------------------------- 23

Relay and Alarm Operation ------------------------------------------------ 26

Scaling the 4-20 mA Analog Output (Aout)---------------------------- 32

Analog Output when Display is Out of Range------------------------- 32

Programming the Meter (prog)--------------------------------------------- 33

Scaling the Meter (scal)---------------------------------------------------- 34

Calibrating the Meter (Cal)------------------------------------------------- 34

Recalibrating Process Inputs (ICal)------------------------------------- 35

Javelin D ●Model PD644 Voltmeter Instruction Manual

Setting Up the Password (pass) ------------------------------------------- 35

Locking the Meter ------------------------------------------------------------ 35

Unlocking the Meter---------------------------------------------------------- 36

Advanced Features Menu---------------------------------------------------- 37

Advanced Features Menu & Display Messages---------------------- 38

Noise Filter (fltr)------------------------------------------------------------ 39

Noise Filter Bypass (byps)------------------------------------------------- 39

Serial Communications (serl)-------------------------------------------- 40

Select Menu (SElc) ---------------------------------------------------------- 40

Display Intensity (inty)----------------------------------------------------- 41

Meter Copy Function (Copy)----------------------------------------------- 42

Internal Calibration (ICal)-------------------------------------------------- 44

OPERATION----------------------------------------------------------------46

Front Panel Buttons Operation -------------------------------------------- 46

Maximum and Minimum Readings---------------------------------------- 47

MOUNTING DIMENSIONS----------------------------------------------48

TROUBLESHOOTING----------------------------------------------------49

Diagnostics Menu (diag)----------------------------------------------------- 49

Determining Software Version -------------------------------------------- 49

Factory Defaults & User Settings----------------------------------------- 50

Reset Meter to Factory Defaults------------------------------------------- 52

Troubleshooting Tips --------------------------------------------------------- 53

USER INTERFACE QUICK REFERENCE GUIDE----------------54

Javelin D ●Model PD644 Voltmeter Instruction Manual

Table of Figures

Figure 1. Panel Cutout and Mounting...............................................11

Figure 2. Power Connections............................................................12

Figure 3. DC Voltage Signal Connections........................................13

Figure 4. RS-485 Data Bus Connections..........................................14

Figure 5. Relay Output Connections ................................................14

Figure 6. AC and DC Loads Protection.............................................15

Figure 7. Low Voltage DC Loads Protection....................................15

Figure 8. 4-20 mA Transmitter Powered by Meter ...........................16

Figure 9. 4-20 mA Transmitter Powered Externally.........................16

Figure 10. Meter Copy Connection ...................................................42

Figure 11. Meter Dimensions – Side View........................................48

Figure 12. Case Dimensions - Top View...........................................48

SAFETY INFORMATION

CAUTION: Read complete

instructions prior to instal-

lation and operation of the

meter.

WARNING: Risk of

electric shock.

WARNING

Hazardous voltages exist within enclosure. Installation and service

should be performed only by trained service personnel.

Javelin D ●Model PD644 Voltmeter Instruction Manual

SPECIFICATIONS

Except where noted all specifications apply to operation at 77°F (25°C).

General

DISPLAY 0.56" (14 mm) high, red LED

Four digits (-1999 to 9999), automatic lead zero blanking.

DISPLAY INTENSITY Eight intensity levels

DISPLAY

UPDATE RATE Minimum of five times per second

OVERRANGE Display flashes 9999

UNDERRANGE Display flashes -1999

PROGRAMMING

METHODS Four front panel buttons, RS-485 interface, or cloning

using Copy function

NOISE FILTER Programmable from 2 to 199 (0 will disable filter)

RECALIBRATION All ranges are calibrated at the factory. Recalibration is

recommended at least every 12 months.

MAX/MIN

DISPLAY Maximum and minimum measured voltages stored until

reset by the user or until power to the meter is turned off.

PASSWORD Programmable password restricts modification of

programmed settings.

NON-VOLATILE

MEMORY All programmed settings are stored in non-volatile memory

for a minimum of ten years without power.

Model Watts

PD644-6RX-14* 20

PD644-7RX-04 6

POWER OPTIONS AC: 85-265 VAC, 50/60 Hz

DC: 90-265 VDC

Optional: 12-36 VDC, 12-24 VAC

See table for power consumption

(*X: number depends on option)

FUSE Required fuse: UL Recognized, 5 A maximum, slow blow

Up to 6 meters can share one 5 A fuse

ISOLATED

POWER SUPPLY

OPTION

24 VDC ±10% @ 200 mA

NORMAL MODE

REJECTION 64 dB at 50/60 Hz

ISOLATION 4 kV from mains

500 V from transmitter to other secondary circuits

500 V from 24 VDC supply to other secondary circuits

Javelin D • Model PD644 Voltmeter Instruction Manual

ENVIRONMENTAL

Operating temperature range: 32 to 150°F (0 to 65°C)

Storage temperature range: -40 to 185°F (-40 to 85°C)

Relative humidity: 0 to 90%, non-condensing

CONNECTIONS

Removable screw terminal blocks accept 12 to 26 AWG

ENCLOSURE 1/8 DIN, high impact plastic,

UL 94V-0, color: gray

MOUNTING 1/8 DIN panel cutout required. Two panel mounting

bracket assemblies provided.

TIGHTENING

TORQUE Screw terminal connectors: 5 lb-in (0.56 Nm)

OVERALL

DIMENSIONS 2.45" x 4.68" x 4.19" (62 mm x 119 mm x 106 mm)

(H x W x D)

WEIGHT 9 oz (255 g) (Including options)

WARRANTY 3 years parts and labor

EXTENDED

WARRANTY 1 or 2 years, refer to Price List for details

Voltage Measurement Input

INPUT 0 to 300 VDC

ACCURACY ±0.05% of full scale ±1 count

TEMPERATURE

DRIFT 50 PPM/°C from 0 to 65°C ambient

DECIMAL POINT Up to three decimal places: d.ddd, dd.dd, ddd.d, or dddd

INPUT

IMPEDANCE Greater than 1 MΩ

CALIBRATION

RANGE

n Error message will appear if input 1 and input 2

signals are too close together.

Minimum Span: 10 VDC

Safety Compliance

UL LISTED USA and Canada

UL 508 Industrial Control Equipment

UL FILE NUMBER E160849

FRONT PANEL UL Type 4X, NEMA 4X, IP65; panel gasket provided

Javelin D ●Model PD644 Voltmeter Instruction Manual

Relays Option

RATING 2 SPDT (form C); rated 3 A @ 30 VDC or 3 A @ 250 VAC

resistive load; 1/14 HP @ 125/250 VAC for inductive loads

ELECTRICAL

NOISE

SUPPRESSION

A suppressor (snubber) should be connected to each relay

contact switching inductive loads, to prevent

disruption to the microprocessor’s operation.

Recommended suppressor value: 0.01 µF/470 Ω, 250 VAC

(Order PDC model number PDX6901).

DEADBAND 0-100% of full scale, user selectable

HIGH OR LOW

ALARM User may program any alarm for high or low trip point.

RELAY

OPERATION Automatic (non-latching)

Latching

Alternation control

Modbus®control

RELAY RESET User selectable via front panel buttons or serial

communication

Automatic reset only (non-latching)

Automatic plus manual reset at any time (non-latching)

Manual reset only at any time (latching)

Manual reset only after alarm condition has cleared (latching)

Automatic reset: Relays will automatically reset when the

input passes the reset point.

Manual reset: Front panel ACK button. Pressing ACK re-

sets all manually resettable relays.

TIME DELAY 0 to 199 seconds, on and off delays

Programmable and independent for each relay

FAIL-SAFE

OPERATION Programmable

Independent for each relay

AUTO

INITIALIZATION When power is applied to the meter, relays will reflect the

state of the input to the meter.

Fail-safe operation: relay coil is energized in non-alarm condition. In

case of power failure, relay will go to alarm state.

Javelin D ●Model PD644 Voltmeter Instruction Manual

Isolated 4-20 mA Transmitter Output

OUTPUT RANGE 1.00 to 23.00 mA typical

CALIBRATION Factory calibrated for 4-20 mA

SCALING RANGE 0.00 to 23.99 mA for any display range,

see output range above

ACCURACY ± 0.1% F.S. ± 0.004 mA

TEMPERATURE

DRIFT 50 PPM/°C from 0 to 65°C ambient

Note: Analog output drift is separate from input drift.

ISOLATED

TRANSMITTER

POWER SUPPLY

24 VDC ±10% @ 20 mA

EXTERNAL LOOP

POWER SUPPLY 35 VDC maximum

Power supply Minimum Maximum

24 VDC 10 Ω700 Ω

OUTPUT LOOP

RESISTANCE

35 VDC (external) 100 Ω1200 Ω

Serial Communications

METER

ADDRESS PDC protocol: 0 - 99

Modbus®protocol: 1 - 247

BAUD RATE 300 – 19,200 bps

TRANSMIT

TIME DELAY Programmable between 0 and 199 ms

DATA 8 bit (1 start bit, 1 stop bit)

PARITY None, even, or odd

(Modbus®only; PDC protocol does not use parity)

BYTE-TO-BYTE

TIMEOUT 0.01 – 2.54 sec (Modbus®only)

TURN AROUND

DELAY Less than 2 ms (fixed)

Request or download copies of the Precision Digital Serial Communication Pro-

tocol and Modbus®Register Tables specifications for details about serial data

communications with Precision Digital products.

Autres manuels pour Javelin D PD644

Table des matières

Autres manuels PRECISION DIGITAL Instrument de mesure

PRECISION DIGITAL

PRECISION DIGITAL vantageview Safe Touch PD6700 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL PD660 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL PD685 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-6100 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL ProtEX-MAX PD8-7000 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL ProVu Series Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL Loop Leader PD689 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL PD6200 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL PD8-7000 Series Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL ProVu PD7000 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL Javelin D PD644 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL ProtEx PD6820 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-7000 Series Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL Protex Pro PD6801 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL Sabre P PD603 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL PD6000-6R0 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL ProVu Series Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL PD6800 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL ProVu Series Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL PD6701 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL PD6060 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL PD6720 Series Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL Helios PD2-6060 Manuel utilisateur

PRECISION DIGITAL

PRECISION DIGITAL NOVA PD560 Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur