Please make sure to read this page carefully prior to setting up and operating the 3D Printer.
No need to switch the power voltage as we use universal AC input/full range power supply.
The 3D Printer is very sensitive to static electricity, so please make sure you contact a grounded object
before operating the machine.
Before repairing or making any alterations to the 3D Printer, it is essential that the machine is turned off
and the power cord is unplugged.
The 3D Printer operates at very high temperature; allow the nozzle, the extruded plastic and heating plate
to cool before touching.
Some plastic filaments may give off a little odor when heated. Because of this, the machine should always
operate in a well-ventilated area.
Do not wear gloves when operating or repairing, as entanglement may occur and cause injury.
Do not leave the machine unattended when in operation.
