Powersoft DigiMod IS integration kit Mode d’emploi

Tech Note’s

Number

Keep This Technical Note For Future Reference

1 Preliminary consideration

This article is related to the following products:

fDigiMod 1000

fDigiMod 1500

fDigiMod 2000HV

The kit that allows to transform a DigiMod module to DigiMod

IS (integrated solution) is labeled KT000276, and comprehends:

fN°1 Heat Sink

fN° 1 interface (already mounted on Heat Sink)

fN° 1 DSP-C

fN° 1 PowerCon Blue (already mounted on Heat Sink)

fN° 1 PowerCon Grey (already mounted on Heat Sink)

fN° 6 Screws for xing DigiMod module on Heat Sink

fN° 2 Screws for xing DSP-C board on Heat Sink

fN° 1 Bolt for xing ground wire (on PowerCon connection)

to DigiMod module

2 Tools needed

fPhillips cross-wing screwdriver

3 Procedure

1. Fix the DSP-C on DigiMod SIMM board connector with the

two screws.

TECHNICAL NOTE #18 rev. 01

DigiMod IS integration kit

How to transform a DigiMod module to DigiMod IS (integrated solution)

2. Remove all jumpers located on DigiMod on CN18/CN17

FIGURE 1: phillipsscrewdriver.jpg

FIGURE 2: Installing DSP-C

FIGURE 3: Jumpers to be removed, overview

FIGURE 4: Jumpers to be removed, detail

powersoft_TN018_DigiModISKit_en_v1.0

3. Fix the DigiMod module on the heat sink with the six screws.

4. Fix the grounding with a bolt.

5. Connect the PowerCon mains on the DigiMod.

6. Connect the programming at cables from the interface to

the DSP-C on board.

7. The procedure is nished.

FIGURE 6: Fixing the grounding

FIGURE 7: Connecting the powercon

FIGURE 5: Fixing the module on the heat sink

FIGURE 9: Connecting the at cable

FIGURE 8: Jumpers removed

Via Enrico Conti, 5

50018 Scandicci (FI) Italy

Tel: +39 055 735 0230

Fax: +39 055 735 6235

General inquiries: info@powersoft.it

Sales: sales@powersoft.it

Application & technical support: support@powersoft.it

Service & maintenance: service@powersoft.it

www.powersoft-audio.com

Autres manuels powersoft Unité de contrôle

powersoft

powersoft LiteMod 4HC Manuel utilisateur

powersoft

powersoft IpalMod Manuel utilisateur

powersoft

powersoft MiniMod 4 Manuel utilisateur

powersoft

powersoft DigiMod 500 Manuel utilisateur

powersoft

powersoft DigiMod 1000 NPS Guide de sécurité

powersoft

powersoft LiteMod Manuel utilisateur

powersoft

powersoft DSP LITE Manuel utilisateur

powersoft

powersoft M-Drive Series Manuel utilisateur

powersoft

powersoft DigiMod 3004PFC2 Manuel utilisateur

powersoft

powersoft DigiMod IS Series Fiche technique

powersoft

powersoft DigiMod 3004PFC4 Manuel utilisateur

powersoft

powersoft LiteMod 4HC Manuel utilisateur

powersoft

powersoft LiteMod Manuel utilisateur

powersoft

powersoft D-Cell504 IS Mode d’emploi

powersoft

powersoft IpalMod Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

powersoft DigiMod IS integration kit Mode d’emploi

Manuels Unité de contrôle populaires d'autres marques