Powerfix Profi KH 2927-2 Manuel utilisateur

KOMPERNASS GMBH

BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: KH2927-2-07/11-V1

IAN: 69084

Multi-Function Detector

Operating instructions

Rakenneilmaisin

Käyttöohje

Multifunktionsdetektor

Betjeningsvejledning

Multifunktionsdetektor

Bruksanvisning

KH 2927-2

Multifunktionsdetektor

Bedienungsanleitung

KH 2927-2

- 1 -

IINNDDEEXXPPAAGGEE

Intended Usage 2

Safety instructions 2

Technical data 4

Description of the appliance 4

Items supplied 4

Unpacking 4

Inserting the battery 4

Examples of utilisation 5

Locating bearers and cavities 7

Battery display 8

Automatic switch-off 8

Cleaning and storage 8

Disposal 8

Service 9

Importer 9

IB_69084_KH2927_2_LB3.qxd 30.08.2013 10:50 Uhr Seite 1

MMUULLTTII--FFUUNNCCTTIIOONNDDEETTEECCTTOORR

KKHH22992277--22

Read these operating instructions carefully before using this ap-

pliance for the first time and preserve this booklet for later

reference. Pass this booklet on to whoever might acquire the

appliance at a future date.

Intended Usage

This Multi-Function Detector is intended for utilisation in

locating metal or wood bearers, metal objects, cavities

and power supply lines. The appliance is intended for

domestic use only. Do not use it for commercial applications.

Safety instructions

Risk of personal injury!

• Do not use the appliance at locations where there is

a risk of fire or explosion, e.g. in the vicinity of inflam-

mable liquids or gases.

• This appliance is not intended for use by individuals

(including children) with restricted physical, physiological

or intellectual abilities or deficiences in experience

and/or knowledge unless they are supervised by a

person responsible for their safety or receive from this

person instruction in how the appliance is to be used.

• Children should be supervised to ensure that they do

not play with the appliance.

Warning against damage to the appliance!

• NEVER subject the appliance to rain. Do not use the

appliance in wet or moist environments.

• Do NOT use the appliance to determine the alternating

voltage in exposed or non-insulated power cables.

• Do NOT use the appliance as a substitute for a Voltmeter.

- 2 -

IB_69084_KH2927_2_LB3.qxd 30.08.2013 10:50 Uhr Seite 2

Advice about locating objects

The appliance does not always recognise all metal objects,

cavities or electrical cables. The following conditions can

contribute to inexact results:

- very thick walls

- weak battery

- deeply laid power cables or metal objects

- shielded cables

- thick walls with thin pipes or power cables

- walls panelled with metal sheets

- very moist conditions

• With this appliance power cables cannot be determined

in circuits,

- which are isolated from the mains power supply.

- through which direct current flows.

- which are used for computer or telecommunications

systems.

• No liability will be accepted for damage caused by

manipulation of the appliance and through disregard

of the safety instructions.

Interaction with batteries

Risk of explosion!

Do not throw batteries into a fire. Do not recharge non-

rechargeable batteries.

• Never open batteries, never solder or weld batteries.

Never short-circuit batteries. The risk of explosions and

injuries exists!

• If you do not intend to use the appliance for an extended

period remove the battery, otherwise it could leak cor-

rosive acids.

• If the batteries have leaked, put on a pair of protective

gloves to avoid the risk of injury through chemical burns.

Clean the battery compartment and the battery contacts

with a dry cloth.

• Always replace the battery with a battery of the same type.

• Keep batteries away from children. Children can put

batteries into their mouths and swallow them. If a battery

is swallowed immediately seek medical assistance.

- 3 -

IB_69084_KH2927_2_LB3.qxd 30.08.2013 10:50 Uhr Seite 3

Technical data

Locating of: Bearers, metal, cavities, power supply lines

Power supply: 9V Block battery, 6F22/6LR61

Detection depth for bearers: 19 mm +/- 3 mm

Detection depth for metal: 30 mm +/- 13 mm

Detection depth for cavities: 38 mm +/- 5 mm

Detection depth for power

supply lines: 50 mm /no indication

Description of the appliance

1 Measurement head with centre line marking

2 Display

3 Function switch

4 Battery compartment

5 ON/OFF button

6 PUSH button

Items supplied

• Multi-Function Detector

• 9V Block battery

• Operating Instructions

Unpacking

Take the multi-purpose detector from its packaging.

Remove all transport restraints and packaging materials.

Inserting the battery

1. Open the battery compartment 4at the rear of the

multi-purpose detector.

2. Place the 9V block battery onto the contacts. Pay heed

to the correct polarity.

3. Press the 9V block battery into the battery compart-

ment 4.

- 4 -

IB_69084_KH2927_2_LB3.qxd 30.08.2013 10:50 Uhr Seite 4

Warning:

Ensure that the wires are not trapped in any way. This could

irreparably damage the appliance.

4. Close the battery compartment 4. The battery com-

partment lid must audibly engage.

Examples of utilisation

Tips:

• In the utilisation examples the appliance is shown as being

horizontal to the wall. However, you can also use the ap-

pliance vertical to the wall!

• Before putting it to use, test the appliance by locating a known

bearer or cavity etc., to ensure that it is working correctly.

• In cases of doubt, always consult a qualified building con-

tractor.

Locating bearers - STUD

- 5 -

IB_69084_KH2927_2_LB3.qxd 30.08.2013 10:50 Uhr Seite 5

Locating metallic objects - METAL

Locating cavities - DEEP

Locating power supply lines - AC

- 6 -

IB_69084_KH2927_2_LB3.qxd 30.08.2013 10:50 Uhr Seite 6

Locating bearers and cavities

Attention!

Before boring a hole in the wall, also check to ensure that there

is not a cable carrying alternate current located under the sur-

face. Therefore, after detecting metals, ALWAYS carry out an

additional search for power cables!

Tips:

To enable a power cable to be detected by the appliance, its

circuit must be under power. If you wish to trace for example

the cable route from light switch to lamp, switch the lamp on.

1. Press the button ON/OFF 5to switch the appliance on.

2. Repeatedly press the function switch 3until an arrow

appears above one of the following detection objects in

the display 2:

STUD (Locating bearers)

METAL (Locating metallic objects)

DEEP (Locating cavities)

AC (Locating power supply lines)

3. Hold the detector with the underside flat against the

area to be examined and press the button PUSH 6

down (several short signal tones sound).

4. Now slowly slide the detector in this position over the

wall.

5. Should an appropriate object be located close to the

measuring head 1, at first a few and then more be-

ams will appear in the display 2.

• The closer the measuring head 1is located to the

object, the greater the number of beams shown in the

display 2.

• When a constant signal tone can be heard this indicates

that the object is located directly under the measuring

head 1of the detector. Additionally, an arrow ap-

pears in the display 2.

6. Now, move the detector further over the area, until the

number of beams in the display reduces and the signal

tone switches itself off, to pinpoint the exact position and

placing of the object.

- 7 -

IB_69084_KH2927_2_LB3.qxd 30.08.2013 10:50 Uhr Seite 7

Battery display

A battery symbol appears in the display 2when the battery

is weak resp. almost discharged. Replace the battery as soon

as possible (see section "Inserting the battery").

If you do not, the measurements will be false.

Automatic switch-off

If a button is not activated for approx. 60 seconds, the

appliance switches itself off automatically.

Cleaning and storage

• Store the appliance at a dry and frost-free location.

• If you do not intend to use the appliance for an extended

period, remove the battery from the battery compart-

ment.

• Clean the appliance with a soft, dry cloth.

• Do not use chemical or abrasive cleaning agents.

These could damage the housing.

Disposal

Do not dispose of the appliance in your normal

domestic waste. This product is subject to the

provisions of European Directive 2002/96/EC.

Dispose of the appliance through an approved disposal

centre or at your community waste facility.

Observe the currently applicable regulations. In case of

doubt, please contact your waste disposal centre.

Disposal of batteries/accumulators

Used batteries/rechargeable batteries may not be disposed

of in household waste. Every consumer is legally obliged to

dispose of batteries at a collection site of his community/city

district or at a retail store.

The purpose of this obligation is to ensure that batteries

are disposed of in a non-polluting manner. Only dispose

of batteries when they are fully discharged.

Dispose of the packaging materials in an environ-

mentally responsible manner.

- 8 -

IB_69084_KH2927_2_LB3.qxd 30.08.2013 10:50 Uhr Seite 8

Autres manuels pour KH 2927-2

Table des matières

Langues :

Autres manuels Powerfix Profi Capteur de sécurité

Powerfix Profi

Powerfix Profi KH 2927-2 Manuel utilisateur

Powerfix Profi

Powerfix Profi 107555 Manuel utilisateur

Powerfix Profi

Powerfix Profi PMDL 5 B1 Manuel utilisateur

Powerfix Profi

Powerfix Profi 271367 Manuel utilisateur

Powerfix Profi

Powerfix Profi IAN 40111 Manuel utilisateur

Powerfix Profi

Powerfix Profi 278296 Manuel utilisateur

Powerfix Profi

Powerfix Profi 4-IN-1 MULTI-DETECTOR Manuel utilisateur

Powerfix Profi

Powerfix Profi 271367 Manuel utilisateur

Powerfix Profi

Powerfix Profi PMDL 5 A1 Manuel utilisateur

Powerfix Profi

Powerfix Profi Z31385 Manuel utilisateur

Powerfix Profi

Powerfix Profi Z31385 Manuel utilisateur

Powerfix Profi

Powerfix Profi 97003 Manuel utilisateur

Powerfix Profi

Powerfix Profi PMDL 5 B1 Manuel utilisateur

Powerfix Profi

Powerfix Profi PMDL 5 B1 Manuel utilisateur

Powerfix Profi

Powerfix Profi 288019 Manuel utilisateur

Powerfix Profi

Powerfix Profi 273599 Manuel utilisateur

Powerfix Profi

Powerfix Profi 288019 Manuel utilisateur

Powerfix Profi

Powerfix Profi PMDL 5 B1 Manuel utilisateur

Powerfix Profi

Powerfix Profi HG00384B Manuel utilisateur

Powerfix Profi

Powerfix Profi Z31712A/C Manuel utilisateur

Powerfix Profi

Powerfix Profi 77287 Manuel utilisateur

Powerfix Profi

Powerfix Profi 278296 Manuel utilisateur

Powerfix Profi

Powerfix Profi 91252 Manuel utilisateur

Powerfix Profi

Powerfix Profi KHH 2927-2 Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur