POSIFLEX PS Series Manuel utilisateur

Package Contents



Fanless LCD touch terminal

(x 1)

Power adaptor (x 1)

Power cord (x 1)

User Manual (x 1)

Recovery DVD

(x 1)

(for pre-loaded OS model only)

Product Features



Fanless terminal



Intel® Celeron® Bay Trail N2807 Celeron processor, up to

2.16 GHz, Dual Core, 1MB Cache for PS-3415 /

Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz)

for PS-3415E



Foldable base that allows PS Series to be configured into

different configurations



Projected-capacitive touch



Integrated structure for side mount upgrade kit:

SA-105/205/305/405/505; back mount display: LM-6807U /

6810U and PD-360R/360UE/2609UE/6807U;

40-key dynakey attachment with MSR or RFID option:

KP-500



Water resistant structure designed for easy cleaning

PS-3415/3415E

Fanless LCD Touch Terminal

User

Manual

13110902020 Ver. A0

Terminal from shipping mode to operation mode

In consideration of proper packaging, before shipping, the

terminal is folded, staying in shipping mode. Thus, when

receiving the product, you will find that the terminal is well

folded, as shown below.

Before operating this terminal, unfold it and make this terminal

rise in operation mode by referring to the following steps. Here,

an equivalent model with GEN 7 base is taken below for example.

1. Firstly, lift this terminal gently to

make it to be unfolded.

2. Overturn this terminal in the

direction as indicated by the arrow

in the right figure.

3. Place this terminal on a flat table.

4. Tilt this terminal to a degree in the direction as indicated by

the arrow below.

Terminal from operation mode to shipping mode

To fold this terminal, refer to the following steps. Here, an

equivalent model with GEN 7 base is taken below for example.

1. Remove the cable cover.

2. Carefully hold the lower rim of the display.

3. Push the base-folding lever in the direction as indicated by the

arrow below (1). Then, the display will be loosen and go

down (2).

4. When the display goes down to a degree, loose the base-

folding lever, as shown in the direction as indicated by the

arrow below.

5. Then, gently tilt the display in the direction as indicated by

the arrow below until the display is well folded.

1 2

6. Put back the cable cover.

Views of the PS-3415/3415E

Front View

Rear View

HDD Cover

Rear I/O Cover

Hinge for LCD

Neck Cover

Cable Cover

Cable Exit

Display Screw Hole

LCD Touch Panel

Base Stand

Left Side View Right Side View

Bottom View

View of I/O Interface

Top I/O Ports Rear I/O Ports

COM4 Port 3

Parallel (LPT) Port

Connector

USB 2.0 Port 4

PS/2_KB Pin Header

※

※※

※

The top I/O ports are provided for COM-based and USB-based peripheral

devices, for example, customer display.

MSR Port Cover

Bottom I/O Cover

Power Button

Brightness

Adjustment Button “+”

Brightness

Adjustment Button “-”

Bottom I/O Ports

RJ45 LAN Port 2

USB 2.0 Port

VGA Port 4

COM Port

(COM3/COM2/COM1)

RJ11 Cash Drawer Port 6

12VDC-IN Power Jack

Installing Optional Upgrade Kits and Peripherals

PS-3415/3415E can work with multiple optional upgrade kits and

peripheral devices, such as magnetic stripe reader (MSR), LCD

monitor, cash drawer and the like.

Before installing an optional upgrade kit and/or peripheral device,

make sure that the system is powered off and the external power

source is removed from the POS box to prevent electric hazard!

Failure to follow the warning description will void the product

warranty!

For the detailed instruction, refer to each of the user manuals of

the optional upgrade kits and peripheral devices.

Connecting Power Adapter and I/O Cables

Before connecting power adapter and I/O cables to the I/O ports

of PS series terminal, please route and arranging the cables. Refer

to the following step-by-step instruction of cable routing and

arrangement for the details. Here, an equivalent model with GEN

7 base is taken below for example.

1. Press the circled section of the

cable cover with your thumb.

2. Pull out the cable cover.

3. Push and tilt the terminal to the

end in the direction as shown by

the arrow.

Pull out

4. Determine that the terminal is

tilted to the end, as shown in the

right figure.

5. Press the circled section with two

thumbs and pull by force the two

sides of the locking hook with two

forefingers as indicated by the

arrow.

6. Remove the neck cover from the

base stand.

7. Tilt the terminal slightly at a little angle in the direction as

shown by the arrow, making cables easily pass through the

cable passage.

Cable Passage

8. Make the connector, which will be connected to the I/O port

of the terminal, pass through the cable passage of base stand.

9. Push and tilt the terminal to the

end in the direction as shown by

the arrow.

10. Remove the bottom I/O cover with

your forefinger inserting the

middle hole of the cover.

11. Connect the connector of the

power adapter to the 12VDC-IN

power jack.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels POSIFLEX Terminal tactile

POSIFLEX

POSIFLEX KV-2000 Series Manuel utilisateur

POSIFLEX

POSIFLEX Jiva LT - 8300 Manuel utilisateur

POSIFLEX

POSIFLEX XT-3817-G2 Manuel utilisateur

POSIFLEX

POSIFLEX DT-308 Series Manuel utilisateur

POSIFLEX

POSIFLEX KS - 2010 Manuel utilisateur

POSIFLEX

POSIFLEX TX-4200 Manuel utilisateur

POSIFLEX

POSIFLEX PB-7700 Series Manuel utilisateur

POSIFLEX

POSIFLEX XP-3000 Series Manuel utilisateur

POSIFLEX

POSIFLEX PS-3216A Manuel utilisateur

POSIFLEX

POSIFLEX RT-2015E Manuel utilisateur

POSIFLEX

POSIFLEX XP-3000 Series Manuel utilisateur

POSIFLEX

POSIFLEX XT-4015 Manuel utilisateur

POSIFLEX

POSIFLEX LM-31XXE Manuel utilisateur

POSIFLEX

POSIFLEX Jiva LT-5600 Manuel utilisateur

POSIFLEX

POSIFLEX PD - 2600 Manuel utilisateur

POSIFLEX

POSIFLEX XT6315 Manuel utilisateur

POSIFLEX

POSIFLEX KS - 7210 series Manuel utilisateur

POSIFLEX

POSIFLEX HT-4600 Series Manuel utilisateur

POSIFLEX

POSIFLEX KS-6115 Manuel utilisateur

POSIFLEX

POSIFLEX HS-35 W-G2 Series Manuel utilisateur

POSIFLEX

POSIFLEX XT-3815-G2 Manuel utilisateur

POSIFLEX

POSIFLEX JIVA TP-5700 Manuel utilisateur

POSIFLEX

POSIFLEX HT-3200 SERIES Manuel utilisateur

POSIFLEX

POSIFLEX PST-6000 SERIES Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur