POSIFLEX PS-3315 Manuel utilisateur

Package Contents

PS-3315/3315E/3316/3316E fanless

LCD touch terminal (x 1)

12V/40W Power adaptor (x 1)

Power cord (x 1)

User Manual (x 1)

Product Features

Fanless terminal

Foldable base that allows PS Series to be configured into different

configurations

5-wire resistive touch for PS-3315/3315E/3316/3316E

Integrated structure for side mount upgrade kit: SA-

105/205/305/405/505; back mount display: LM-6807U / 6810U and

PD-360R/360UE/2609UE/6807U; 40-key dynakey attachment with

MSR or RFID option: KP-500

Water resistant structure designed for easy cleaning

PS-3315/3315E/3316/3316E

Fanless LCD Touch Terminal

User Manual

13110900070 Ver. F0

Views of PS-3315/3315E/3316/3316E

Front View

PS-3315/3315E

PS-3316/3316E

Rear View

PS-3315/3315E

PS-3316/3316E

Left Side View

LCD Touch Panel

Gen7 Base

MSR Port Cover

HDD Cover

Rear I/O Cover

Neck Cover

Cable Cover

Cable Exit

2nd Display

Screw Hole

Right Side View

Bottom View

View of I/O Interface

Top I/O Ports

Rear I/O Ports

COM4 Port

Parallel (LPT) Port Connector

USB 2.0 Port

PS/2_KB Pin Header

Bottom I/O Cover

Power Button

Brightness

Adjustment Button “+”

Brightness

Adjustment Button “-”

Bottom I/O Ports

RJ45 LAN Port

USB 2.0 Port

VGA Port

COM Port

(COM3/COM2/COM1)

RJ11 Cash Drawer Port

12VDC-IN Power Jack

Positioning your POS for a Perfect Viewing Angle

The adjustable Gen7 base is designed to help you determine an ideal

position for PS-3315/3315E/3316/3316E using its unique tilt

adjustment mechanism. As the below figures suggest, Gen7 base

basically provides three standard positioning solutions for your terminal:

Flat Folded mode, Low Profile mode, and Full Extended mode.

PS-3315/3315E/3316/3316E with Gen7 Base

Flat Folded mode

Low Profile mode

Full Extended mode

In general, PS-3315/3315E/3316/3316E will be set up beforehand in

Flat Folded mode and then packaged into the box for shipping. After it

is unpacked, you may re-adjust the terminal in either Low Profile

mode or Full Extended mode according to your situation. Below will

provide instructions on how to adjust the specific base connected to the

POS system. As a reminder, please be careful not to touch the LCD

panel while setting up the tilt angle. Please refer to the following

instructions on how to switch among different positioning modes to

find an ideal viewing angle for PS-3315/3315E/3316/3316E with Gen7

base.

1. Unpack PS-3315/3315E/3316/3316E,

which is supposed to be set in Flat

Folded mode, out of the package box

and then lay your POS system on a flat

surface.

2. Steady the base with one hand, and then

tilt the screen downwards.

3. Position your terminal in Full Extended mode

3.1 After grabbing the bottom edge of the screen with your hand,

gently move the screen upward until the screen is locked into

place with a click sound.

3.2 With the screen facing toward you, tilt

the screen up or down to your desired

angle. Please do not press on the LCD

panel while setting up the tilt angle.

4. Return your terminal back to Flat Folded mode from Full

Extended mode.

4.1 Tilt your screen in a horizontal position. Then, remove the

cable cover from the base.

4.2 Support the screen with one hand holding onto its bottom

edge. While pulling the lever backwards, move the display

downwards until the lever is lifted off the hook as shown in

the figure

4.3 Push the cable cover back.

4.4 Tilt the screen again to the

horizontal position.

Hook

Lever

5. Position the terminal in Low Profile mode.

5.1 Follow Step 4 to set up the termimal in

Flat Folded mode.

5.2 Tilt the screen all the way down

5.3 To tilt screen up or down to your

desired angle, please be advised to keep

the base steady with one hand to do so.

Do NOT press on the LCD panel while

setting up the tilt angle.

Installing Optional Upgrade Kits and Peripherals

PS-3315/3315E/3316/3316E can work with multiple optional upgrade

kits and peripheral devices, such as magnetic stripe reader (MSR), LCD

monitor, cash drawer and the like. Before installing an optional upgrade

kit and/or peripheral device, make sure that the system is powered off

and the external power source is removed from the POS box to prevent

electric hazard. For the detailed instruction, refer to each of the user

manuals of the optional upgrade kits and peripheral devices.

Connecting Power Adapter and I/O Cables

Gen7 base features its own cable management to assist you in well

organizing the cords whenever you need to connect peripheral devices

to PS-3315/3315E/3316/3316E. The following provides some useful

cable-routing instructions required to manage your cables.

1. Set up your terminal in Full Extended

mode and then tilt the screen all the way

down.

2. Remove the cable cover from the base.

3. Pull outwards the locking levers with

your forefingers and then remove the

neck cover in the direction shown by the

arrow.

4. Tilt the terminal to the horizontal

position. Then, thread cables through the

cable passage.

5. After tilting the screen all the way up,

remove the bottom I/O cover to locate

the bottom I/O plate.

Cable Passage

6. Connect the connector of the power

adapter to the 12VDC-IN power jack.

7. Tuck the extra cables inside the bottom

I/O compartment, and then push back the

cover to close it.

8. Tilt the screen all the way down.

9. After neatly arranging the cable, place back the neck cover.

10.Push back the cable cover. Please also make sure that cables can be

routed through the cable exit.

Cable Exit

Powering ON the PS-3315/3315E/3316/3316E

Power ON PS-3315/3315E/3316/3316E

Press down the power button for at least 3 seconds to

power on the POS.

Power OFF PS-3315/3315E/3316/3316E

In most cases, press the power button of the POS to

power the system off. If the terminal fails to turn off the

machine for unknown reasons, please be advised to hold

the power button more than 10 seconds to force a

shutdown of the system.

Once powering off the system, if you want to power it

on again, please wait at least 3 seconds.

Power LED Indicator

Power LED indicator, which is located at the

center of the bottom edge of the LCD panel, is

mainly responsible for notifying users of the

current system status by emitting various LED

signals. The chart provided below will offer

helpful information that you need to interpret

LED status.

LED

Status

Description

POWER

Solid blue

System power ON

Solid orange

System standby

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels POSIFLEX Terminal tactile

POSIFLEX

POSIFLEX XT-6015C Manuel utilisateur

POSIFLEX

POSIFLEX Jiva TP-8000 Manuel utilisateur

POSIFLEX

POSIFLEX XP-2000 Series Manuel utilisateur

POSIFLEX

POSIFLEX TX-4200 Manuel utilisateur

POSIFLEX

POSIFLEX Jiva KS-6615 Series Manuel utilisateur

POSIFLEX

POSIFLEX LCD Customer Display PD-7100 Manuel utilisateur

POSIFLEX

POSIFLEX PB-4700DVI Manuel utilisateur

POSIFLEX

POSIFLEX PST-6000 SERIES Manuel utilisateur

POSIFLEX

POSIFLEX PS-3216A Manuel utilisateur

POSIFLEX

POSIFLEX KV-2000 Series Manuel utilisateur

POSIFLEX

POSIFLEX TX-3000 Series Manuel utilisateur

POSIFLEX

POSIFLEX KS - 6715 Manuel utilisateur

POSIFLEX

POSIFLEX HS-2510W-2D Manuel utilisateur

POSIFLEX

POSIFLEX TX-3700 Series Manuel utilisateur

POSIFLEX

POSIFLEX HT-4000 Series Manuel utilisateur

POSIFLEX

POSIFLEX XT-3815 Manuel utilisateur

POSIFLEX

POSIFLEX PST-1000 Series Manuel utilisateur

POSIFLEX

POSIFLEX XT-5315 Manuel utilisateur

POSIFLEX

POSIFLEX KS - 6810 Manuel utilisateur

POSIFLEX

POSIFLEX PS-3416 Manuel utilisateur

POSIFLEX

POSIFLEX HC-1621IR Manuel utilisateur

POSIFLEX

POSIFLEX KS - 6915 Manuel utilisateur

POSIFLEX

POSIFLEX SA-304 Manuel utilisateur

POSIFLEX

POSIFLEX KS - 2010 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur