Porter-Cable CPF23400S Manuel utilisateur

Part No. D20692-005

Side Stack

Compressor

Instruction

manual

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

The Model and Serial No. plate is located on the

frame. Record these numbers in the spaces below

and retain for future reference.

Model No.

Type

Serial No.

ESPAÑOL: PÁGINA 13

FRANÇAISE: PAGE 27

IMPORTANT

Please make certain that the person who is to use

this equipment carefully reads and understands

these instructions before starting operations.

PROFESSIONAL POWER TOOLS

MODEL

CPF23400S

2-ENG

CAUTION indicates a potentially

hazardous situation which, if not

avoided, may result in minor or

moderate injury.

This manual contains information that is important for you to know and understand. This infor-

mation relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To

help you recognize this information, we use the symbols below. Please read the manual and

pay attention to these sections.

DANGER indicates an imminently

hazardous situation which, if not

avoided, will result in death or

serious injury.

CAUTION used without the safety

alert symbol indicates a potentially

hazardous situation which, if not

avoided, may result in property

damage.

WARNING indicates a potentially

hazardous situation which, if not

avoided, could result in death or

serious injury.

Call our Toll Free Number 1-888-559-8550, to obtain the location of the nearest Autho-

rized Service Center for ordering repair parts and for warranty repairs.

When ordering repair parts from your local Authorized Service Center, always give the

following information:

• Model number of your compressor

• Part number and description of the item you wish to purchase

Retain Original Sales Receipt as Proof of Purchase for Warranty Repair Work.

SAFETY GUIDELINES - DEFINITIONS

IMPORTANT SAFETY INSTRUCTIONS

When using electric tools, basic safety precautions

should always be followed to reduce the risk of fire, electric shock

and personal injury, including the following:

READ AND FOLLOW ALL INSTRUCTIONS.

This tool was designed for certain applications. Porter-Cable strongly recommends

that this tool NOT be modified and/or used for any application other than for which

it was designed. If you have any questions relative to its application DO NOT use

the tool until you have written Porter-Cable and we have advised you.

Technical Service Manager

Porter-Cable Corporation

4825 Highway 45 North

P.O. Box 2468

Jackson, TN 38302-2468

3-ENG

RISK OF BURSTING

IT IS NORMAL FOR ELECTRICAL CONTACTS

WITHIN THE MOTOR AND PRESSURE SWITCH TO

SPARK.

IF ELECTRICAL SPARKS FROM COMPRESSOR

COME INTO CONTACT WITH FLAMMABLE

VAPORS, THEY MAY IGNITE, CAUSING FIRE OR

EXPLOSION.

RESTRICTING ANY OF THE COMPRESSOR

VENTILATION OPENINGS WILL CAUSE SERIOUS

OVERHEATING AND COULD CAUSE FIRE.

UNATTENDED OPERATION OF THIS PRODUCT

COULD RESULT IN PERSONAL INJURY OR

PROPERTY DAMAGE.

ALWAYS OPERATE THE COMPRESSOR IN A WELL

VENTILATED AREA FREE OF COMBUSTIBLE

MATERIALS, GASOLINE OR SOLVENT VAPORS.

IF SPRAYING FLAMMABLE MATERIALS, LOCATE

COMPRESSOR AT LEAST 20 FEET AWAY FROM

SPRAY AREA. AN ADDITIONAL LENGTH OF HOSE

MAY BE REQUIRED.

STORE FLAMMABLE MATERIALS IN A SECURE

LOCATION AWAY FROM COMPRESSOR.

NEVER PLACE OBJECTS AGAINST OR ON TOP

OF COMPRESSOR. OPERATE COMPRESSOR IN

AN OPEN AREA AT LEAST 12 INCHES AWAY FROM

ANY WALL OR OBSTRUCTION THAT WOULD

RESTRICT THE FLOW OF FRESH AIR TO THE

VENTILATION OPENINGS.

OPERATE COMPRESSOR IN A CLEAN, DRY, WELL

VENTILATED AREA. DO NOT OPERATE UNIT

INDOORS OR IN ANY CONFINED AREA.

ALWAYS REMAIN IN ATTENDANCE WITH THE

PRODUCT WHEN IT IS OPERATING.

SAVE THESE INSTRUCTIONS

IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY

AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING

INSTRUCTIONS BEFORE USING THIS EQUIPMENT.

RISK OF EXPLOSION OR FIRE

AIR TANK: THE FOLLOWING CONDITIONS COULD LEAD TO A WEAKENING OF THE TANK, AND RESULT

IN A VIOLENT TANK EXPLOSION AND COULD CAUSE PROPERTY DAMAGE OR SERIOUS INJURY.

HAZARD

WHAT CAN HAPPEN HOW TO PREVENT IT

IMPORTANT SAFETY INSTRUCTIONS (cont’d)

DRAIN TANK DAILY OR AFTER EACH USE. IF TANK

DEVELOPS A LEAK, REPLACE IT IMMEDIATELY

WITH A NEW TANK OR REPLACE THE ENTIRE

COMPRESSOR.

NEVER DRILL INTO, WELD, OR MAKE ANY

MODIFICATIONS TO THE TANK OR ITS

ATTACHMENTS.

THE TANK IS DESIGNED TO WITHSTAND SPECIFIC

OPERATING PRESSURES. NEVER MAKE

ADJUSTMENTS OR PARTS SUBSTITUTIONS TO

ALTER THE FACTORY SET OPERATING

PRESSURES.

FOR ESSENTIAL CONTROL OF AIR PRESSURE,

YOU MUST INSTALL A PRESSURE REGULATOR

AND PRESSURE GAUGE TO THE AIR OUTLET OF

YOUR COMPRESSOR. FOLLOW THE EQUIPMENT

MANUFACTURERS RECOMMENDATION AND

NEVER EXCEED THE MAXIMUM ALLOWABLE

PRESSURE RATING OF ATTACHMENTS. NEVER

USE COMPRESSOR TO INFLATE SMALL LOW-

PRESSURE OBJECTS SUCH AS CHILDREN’S

TOYS, FOOTBALLS, BASKETBALLS. ETC.

1. FAILURE TO PROPERLY DRAIN CON-

DENSED WATER FROM THE TANK,

CAUSING RUST AND THINNING OF THE

STEEL TANK.

2. MODIFICATIONS OR ATTEMPTED REPAIRS

TO THE TANK.

3. UNAUTHORIZED MODIFICATIONS TO THE

UNLOADER VALVE, SAFETY VALVE, OR

ANY OTHER COMPONENTS WHICH

CONTROL TANK PRESSURE.

4. EXCESSIVE VIBRATION CAN WEAKEN THE

AIR TANK AND CAUSE RUPTURE OR

EXPLOSION.

ATTACHMENTS & ACCESSORIES:

EXCEEDING THE PRESSURE RATING OF AIR

TOOLS, SPRAY GUNS, AIR OPERATED

ACCESSORIES, TIRES AND OTHER INFLATABLES

CAN CAUSE THEM TO EXPLODE OR FLY APART,

AND COULD RESULT IN SERIOUS INJURY.

WHAT CAN HAPPEN HOW TO PREVENT IT

4-ENG

RISK FROM FLYING OBJECTS

IMPORTANT SAFETY INSTRUCTIONS (cont’d)

THE COMPRESSED AIR STREAM CAN CAUSE

SOFT TISSUE DAMAGE TO EXPOSED SKIN AND

CAN PROPEL DIRT, CHIPS, LOOSE PARTICLES

AND SMALL OBJECTS AT HIGH SPEED,

RESULTING IN PROPERTY DAMAGE OR PERSONAL

INJURY.

ALWAYS WEAR ANSI Z87.1 APPROVED SAFETY

GLASSES WITH SIDE SHIELDS WHEN USING THE

COMPRESSOR.

NEVER POINT ANY NOZZLE OR SPRAYER TOWARD

ANY PART OF THE BODY OR AT OTHER PEOPLE

OR ANIMALS.

ALWAYS TURN THE COMPRESSOR OFF AND

BLEED PRESSURE FROM THE AIR HOSE AND

TANK BEFORE ATTEMPTING MAINTENANCE,

ATTACHING TOOLS OR ACCESSORIES.

WHAT CAN HAPPEN HOW TO PREVENT IT

THE COMPRESSED AIR FROM YOUR

COMPRESSOR IS NOT SAFE FOR BREATHING!

THE AIR STREAM MAY CONTAIN CARBON

MONOXIDE, TOXIC VAPORS OR SOLID PARTICLES

FROM THE TANK.

SPRAYED MATERIALS SUCH AS PAINT, PAINT

SOLVENTS, PAINT REMOVER, INSECTICIDES,

WEED KILLERS, CONTAIN HARMFUL VAPORS AND

POISONS.

ALWAYS OPERATE AIR COMPRESSOR OUTSIDE

IN A CLEAN, WELL VENTILATED AREA. AVOID

ENCLOSED AREAS SUCH AS GARAGES,

BASEMENTS, STORAGE SHEDS, WHICH LACK A

STEADY EXCHANGE OF AIR. KEEP CHILDREN,

PETS AND OTHERS AWAY FROM AREA OF

OPERATION.

NEVER INHALE AIR FROM THE COMPRESSOR

EITHER DIRECTLY OR FROM A BREATHING DEVICE

CONNECTED TO THE COMPRESSOR.

WORK IN AN AREA WITH GOOD CROSS-

VENTILATION. READ AND FOLLOW THE SAFETY

INSTRUCTIONS PROVIDED ON THE LABEL OR

SAFETY DATA SHEETS FOR THE MATERIAL YOU

ARE SPRAYING. USE A NIOSH/MSHA APPROVED

RESPIRATOR DESIGNED FOR USE WITH YOUR

SPECIFIC APPLICATION.

RISK TO BREATHING

WHAT CAN HAPPEN HOW TO PREVENT IT

YOUR AIR COMPRESSOR IS POWERED BY

ELECTRICITY. LIKE ANY OTHER ELECTRICALLY

POWERED DEVICE, IF IT IS NOT USED PROPERLY

IT MAY CAUSE ELECTRIC SHOCK.

REPAIRS ATTEMPTED BY UNQUALIFIED

PERSONNEL CAN RESULT IN SERIOUS INJURY OR

DEATH BY ELECTROCUTION.

ELECTRICAL GROUNDING: FAILURE TO PROVIDE

ADEQUATE GROUNDING TO THIS PRODUCT

COULD RESULT IN SERIOUS INJURY OR DEATH

FROM ELECTROCUTION. SEE GROUNDING

INSTRUCTIONS.

NEVER OPERATE THE COMPRESSOR OUTDOORS

WHEN IT IS RAINING OR IN WET CONDITIONS.

NEVER OPERATE COMPRESSOR WITH COVER

COMPONENTS REMOVED OR DAMAGED.

ANY ELECTRICAL WIRING OR REPAIRS

REQUIRED ON THIS PRODUCT SHOULD BE

PERFORMED BY AUTHORIZED SERVICE

CENTER PERSONNEL IN ACCORDANCE WITH

NATIONAL AND LOCAL ELECTRICAL CODES.

MAKE CERTAIN THAT THE ELECTRICAL CIRCUIT

TO WHICH THE COMPRESSOR IS CONNECTED

PROVIDES PROPER ELECTRICAL GROUNDING,

CORRECT VOLTAGE AND ADEQUATE FUSE

PROTECTION.

RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN HOW TO PREVENT IT

5-ENG

RISK FROM MOVING PARTS

RISK OF BURNS

RISK OF FALLING

IMPORTANT SAFETY INSTRUCTIONS (cont’d)

WHAT CAN HAPPEN HOW TO PREVENT IT

MOVING PARTS SUCH AS THE PULLEY,

FLYWHEEL, AND BELT CAN CAUSE SERIOUS

INJURY IF THEY COME INTO CONTACT WITH YOU

OR YOUR CLOTHING.

ATTEMPTING TO OPERATE COMPRESSOR WITH

DAMAGED OR MISSING PARTS OR ATTEMPTING

TO REPAIR COMPRESSOR WITH PROTECTIVE

SHROUDS REMOVED CAN EXPOSE YOU TO

MOVING PARTS AND CAN RESULT IN SERIOUS

INJURY.

TOUCHING EXPOSED METAL SUCH AS THE

COMPRESSOR HEAD OR OUTLET TUBES, CAN

RESULT IN SERIOUS BURNS.

NEVER OPERATE THE COMPRESSOR WITH

GUARDS OR COVERS WHICH ARE DAMAGED OR

REMOVED.

ANY REPAIRS REQUIRED ON THIS PRODUCT

SHOULD BE PERFORMED BY AUTHORIZED

SERVICE CENTER PERSONNEL.

NEVER TOUCH ANY EXPOSED METAL PARTS ON

COMPRESSOR DURING OR IMMEDIATELY AFTER

OPERATION. COMPRESSOR WILL REMAIN HOT

FOR SEVERAL MINUTES AFTER OPERATION.

DO NOT REACH AROUND PROTECTIVE SHROUDS

OR ATTEMPT MAINTENANCE UNTIL UNIT HAS

BEEN ALLOWED TO COOL.

A PORTABLE COMPRESSOR CAN FALL FROM A

TABLE, WORKBENCH OR ROOF CAUSING

DAMAGE TO THE COMPRESSOR AND COULD

RESULT IN SERIOUS INJURY OR DEATH TO THE

OPERATOR OR BYSTANDERS.

ALWAYS OPERATE COMPRESSOR IN A STABLE

SECURE POSITION TO PREVENT ACCIDENTAL

MOVEMENT OF THE UNIT. NEVER OPERATE

COMPRESSOR ON A ROOF OR OTHER ELEVATED

POSITION. USE ADDITIONAL AIR HOSE TO

REACH HIGH LOCATIONS.

WHAT CAN HAPPEN HOW TO PREVENT IT

RISK OF PROPERTY DAMAGE WHEN

TRANSPORTING COMPRESSOR

(Fire, Inhalation, Damage

to Vehicle Surfaces)

OIL CAN LEAK OR SPILL AND COULD RESULT

IN FIRE OR BREATHING HAZARD, SERIOUS

INJURY OR DEATH CAN RESULT. OIL LEAKS WILL

DAMAGE CARPET, PAINT OR OTHER SURFACES

IN VEHICLES OR TRAILERS.

ALWAYS PLACE COMPRESSOR ON A PROTECTIVE

MAT WHEN TRANSPORTING TO PROTECT

AGAINST DAMAGE TO VEHICLE FROM LEAKS.

REMOVE COMPRESSOR FROM VEHICLE

IMMEDIATELY UPON ARRIVAL AT YOUR

DESTINATION.

ESW-99  9/26/99

6-ENG

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure.

ASME: American Society of Mechanical Engineers; made, tested, inspected, and

registered to meet the standards of ASME.

Cut-In Pressure: While the motor is off, air tank pressure drops as you continue to

use your accessory or air tool. When the tank pressure drops to a certain low level

the motor will restart automatically. The low pressure at which the motor

automatically restarts is called “cut-in pressure.”

Cut-Out Pressure: When you turn on your air compressor and it begins to run, air

pressure in the air tank begins to build. It builds to a certain high pressure before

the motor automatically shuts off - protecting your air tank from pressure higher

than its capacity. The high pressure at which the motor shuts off is called “cut-out

pressure.”

Code Certification: Products that bear one or more of the following marks: UL,

CUL, ETL, CETL, have been evaluated by OSHA certified independent safety

laboratories and meet the applicable Underwriters Laboratories Standards for

Safety.

Porter-Cable air compressors should be operated on not more than a 50% duty

cycle. This means an air compressor that pumps air more than 50% of one hour is

considered misuse, because the air compressor is undersized for the required air

demand. Maximum compressor pumping time per hour is 30 minutes.

GLOSSARY

DUTY CYCLE

SPECIFICATIONS

MODEL NO. CPF23400S

Horsepower-Peak 3

SCFM @ 40 psig 7.7

SCFM @ 90 psig 5.3

Cut-In 110 PSI

Cut-Out 135 PSI

Bore 2.375"

Stroke 1.350"

Voltage/Hertz/Phase 120/60/1

Minimum Branch Circuit 15 Amp

* Fuse Type Time Delay Type “T”

Amperage at Max. Load 15 Amps

Tank Size 4 Gallon

* A circuit breaker is preferred. Use only a fuse or circuit breaker that is the same rating

as the branch circuit on which the air compressor is operated. If the air compressor is

connected to a circuit protected by fuses, use dual element time delay fuses.

7-ENG

DESCRIPTION OF OPERATION

Compressor Pump (A) Fig. 1: To

compress air, the piston moves up and

down in the cylinder. On the

downstroke, air is drawn in through the

intake valves. The exhaust valves

remain closed. On the upstroke of the

piston, air is compressed. The intake

valves close and compressed air is

forced out through the exhaust valves.

Check Valve (B) Fig. 2: When the air

compressor is operating, the check

valve is “open”, allowing compressed

air to enter the air tank. When the air

compressor reaches “cut-out” pressure,

the check valve “closes”, allowing air

pressure to remain inside the air tank.

ON/AUTO - OFF Switch (C) Fig. 3:

Turn this switch ON to provide power to

the automatic pressure switch and OFF

to remove power at the end of each

use.

Pressure Switch (D) Fig. 3: The

pressure switch automatically starts the

motor when the tank pressure drops

below the factory set “cut-in” pressure.

It stops the motor when the air tank

pressure reaches the factory set “cut-

out” pressure.

Regulator (E) Fig. 1: The air pressure

coming from the air tank is controlled

by the regulator. Turn the regulator knob

clockwise to increase pressure and

counterclockwise to decrease pressure.

To avoid minor readjustment after

making a change in pressure setting,

always approach the desired pressure

from a lower pressure. When reducing

from a higher to a lower setting, first

reduce to pressure less than that

desired, then bring it up to the desired

pressure. Depending on the air require-

ments of each particular accessory, the

outlet regulated air pressure may have

to be adjusted while operating the

accessory.

Quick Connect Air Outlets (J) Fig. 1:

For easy connecting and disconnecting

of tools. Allows two tools to be used at

the same time.

Figure 1

Figure 2

Figure 3

8-ENG

Outlet Pressure Gauge (F) Fig. 1: The outlet pressure gauge indicates the air

pressure available at the outlet side of the regulator. This pressure is controlled by

the regulator and is always less than or equal to the tank pressure. See “Operating

Procedures”.

Tank Pressure Gauge (G) Fig. 3: The tank pressure gauge indicates the reserve air

pressure in the tank.

Cooling System: This compressor contains an advanced design cooling system. At

the heart of this cooling system is an engineered fan. It is perfectly normal for this

fan to blow air through the vent holes in large amounts. You know that the cooling

system is working when air is being expelled.

Air Intake Filter (H) Fig. 3: This filter is designed to clean air flowing into the pump.

This filter must always be clean and free from obstructions. Twist filter cover

counter-clockwise to remove and expose paper filter element.

Drain Valve (L) Fig. 2: The drain valve is located at the base of the lower air tank

and is used to drain condensation at the end of each use.

Motor Thermal Overload Protector: The electric motor has an automatic thermal

overload protector. If the motor overheats for any reason, the thermal overload

protector will shut off the motor. The motor must be allowed to cool before

restarting.

Pressure Release Valve (not shown): The pressure release valve located on the

side of the pressure switch, is designed to automatically release compressed air

from the compressor head and the outlet tube when the air compressor reaches

“cut-out” pressure or is shut off. The pressure release valve allows the motor to

restart freely. When the motor stops running, air will be heard escaping from this

valve for a few seconds. No air should be heard leaking when the motor is running,

or continuous leaking after unit reaches cut-out pressure.

Safety Valve (K) Fig. 3: If the pressure switch does not shut off the air compressor

at its cutout pressure setting, the safety valve will protect against high pressure by

“popping out” at its factory set pressure (slightly higher than the pressure switch

cut-out setting).

If the safety valve does not work properly, over-pressuri-

zation may occur, causing air tank rupture or an explosion. Daily pull

the ring on the safety valve to make sure that the safety valve

operates freely. If the valve is stuck or does not operate smoothly, it

must be replaced with the same type of valve.

INSTALLATION AND BREAK-IN PROCEDURES

LOCATION OF THE AIR COMPRESSOR

Your compressor comes to you completely assembled and ready for use. Operate

the air compressor in a dry, clean, cool and well ventilated area. The air compressor

pump and case are designed to allow for proper cooling. Clean or blow off dust or

dirt that collects on the air compressor. A clean air compressor runs cooler and

provides longer service. The ventilation openings on your air compressor are

necessary to maintain proper operating temperature. Do not place rags or other

containers on or near these openings.

VOLTAGE AND CIRCUIT PROTECTION

See SPECIFICATIONS Section of this manual.

9-ENG

GROUNDING INSTRUCTIONS

The air compressor is equipped with a cord having a grounded wire with an

appropriate grounding plug. The plug must be used with an outlet that has been

installed and grounded in accordance with all local codes and ordinances. The

outlet must have the same configuration as the plug. See illustration. DO NOT

USE AN ADAPTER.

IMPROPER GROUNDING CAN RESULT IN SEVERE

ELECTRICAL SHOCK.

Inspect the plug and cord before each use. Do not use if there are signs of

damage. Do not modify the plug that has been provided. If it does not fit the

available outlet, the correct outlet should be installed by a qualified electrician.

If these grounding instructions are not completely understood, or if in doubt as to

whether the compressor is properly grounded, have the installation checked by a

qualified electrician.

EXTENSION CORDS

Use extra air hose instead of an extension cord to avoid voltage drop and power

loss to the motor. If an extension cord must be used, be sure it is:

• A 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot

receptacle that will accept the plug on the compressor.

• In good condition.

• No longer than 50 feet.

• 12 gauge (AWG) or larger. (Wire size increases as gauge number decreases.)

10 AWG and 8 AWG may also be used. DO NOT USE 14 AWG or smaller.

ADDITIONAL REGULATORS AND CONTROLS

Since the air tank pressure is usually greater than that which is needed, a

regulator is employed to control the air pressure ahead of any individual air driven

device.

Separate air transformers which combine the function of air regulation, moisture

and dirt removal should be used where applicable.

LUBRICATION

The bearings in this unit are sealed bearings which contain sufficient lubricant to

last their lives. No other lubrication is required.

BREAK-IN PROCEDURES

Serious damage may result if the following break-in

instructions are not closely followed.

This procedure is required before the air compressor is put into service (before the

hose is installed), the check valve is replaced, or a complete compressor pump is

replaced.

The procedure:

1. Make sure the pressure switch lever is in the "OFF" position.

2. Plug the power cord into the correct branch circuit receptacle.

3. Open the drain valve fully to permit air to escape and prevent air pressure build

up in the air tank during the break-in period.

4. Move the pressure switch lever to "ON/AUTO". The compressor will start.

5. Run the compressor for 15 minutes. Make sure the drain valve is open and

there is minimal air pressure build-up in tank.

6. After 15 minutes, close the drain valve.

7. Move the pressure switch lever to "ON/AUTO". The air receiver will fill to cut-

out pressure and the motor will stop. The compressor is now ready for use.

10-ENG

OPERATING PROCEDURES

Preparation for Use:

1. Before attaching air hose or accessories, make sure the OFF/AUTO lever is set

to “OFF” and the air regulator is closed.

2. Inspect air intake filter (H) Fig. 1. Clean or replace as necessary.

3. Attach hose and accessories.

TOO MUCH AIR PRESSURE CAUSES A HAZARDOUS

RISK OF BURSTING. CHECK THE MANUFACTURER’S MAXIMUM

PRESSURE RATING FOR AIR TOOLS AND ACCESSORIES. THE

REGULATOR OUTLET PRESSURE MUST NEVER EXCEED THE

MAXIMUM PRESSURE RATING OF THE TOOL BEING USED.

4. Turn the OFF/AUTO lever to “AUTO” and allow tank pressure to build. Motor will

stop when tank pressure reaches “cut-out” pressure.

5. Open the regulator by turning it clockwise. Adjust the regulator to the correct

pressure setting. The compressor is ready for use.

6. Always operate the air compressor in well ventilated areas, free of gasoline or

other solvent vapors. Do not operate the compressor near the spray area.

After Use:

7. Set the “OFF/AUTO” lever to “OFF”.

8. Turn the regulator counterclockwise to set the outlet pressure to zero.

9. Remove the air tool or accessory.

10.Pull ring on safety valve (K) Fig. 3, allowing air to bleed from the tank until tank

pressure is approximately 20 psi. Release safety valve ring.

11.Drain water from air tank. Turn drain valve (J) Fig. 2, counterclockwise, to open.

WATER WILL CONDENSE IN THE AIR TANK. IF NOT

DRAINED, WATER WILL CORRODE AND WEAKEN THE AIR TANK

CAUSING A RISK OF AIR TANK RUPTURE.

NOTE: If drain valve is plugged, pull ring on safety valve (K) Fig. 3, and hold until all air

pressure has been released. The valve can then be removed, cleaned, and reinstalled.

12.After the water has been completely drained, turn drain valve to close. The air

compressor can now be stored.

MAINTENANCE

KEEP TOOL CLEAN

Periodically blow out all air passages with dry compressed air. Inspect air intake

filter and clean or replace as necessary. Clean all plastic parts with a soft damp

cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or

otherwise damage the material.

WEAR SAFETY GLASSES WHILE USING COMPRESSED

AIR.

FAILURE TO START

Should your tool fail to start, check to make sure the prongs on the cord plug are

making good contact in the outlet. Also, check for blown fuses or open circuit

breakers in the line.

Autres manuels pour CPF23400S

Table des matières

Autres manuels Porter-Cable Compresseur d'air

Porter-Cable

Porter-Cable 1000002853 Manuel utilisateur

Porter-Cable

Porter-Cable J0B BOSS C3151 Manuel utilisateur

Porter-Cable

Porter-Cable CF1540 Manuel utilisateur

Porter-Cable

Porter-Cable CFFC350C Manuel utilisateur

Porter-Cable

Porter-Cable C7501M Manuel utilisateur

Porter-Cable

Porter-Cable CPF4515 Manuel utilisateur

Porter-Cable

Porter-Cable PXCMF220VW Manuel utilisateur

Porter-Cable

Porter-Cable CPFAC2040P Manuel utilisateur

Porter-Cable

Porter-Cable C6110 Manuel utilisateur

Porter-Cable

Porter-Cable CPF4515 Manuel utilisateur

Porter-Cable

Porter-Cable C2150 Manuel utilisateur

Porter-Cable

Porter-Cable C6001 Manuel utilisateur

Porter-Cable

Porter-Cable PXCMF226VW Manuel utilisateur

Porter-Cable

Porter-Cable CPFC2TV3525VP Manuel utilisateur

Porter-Cable

Porter-Cable CPL6025 Manuel utilisateur

Porter-Cable

Porter-Cable CFFN251N-P Manuel utilisateur

Porter-Cable

Porter-Cable CPF6020 Manuel utilisateur

Porter-Cable

Porter-Cable N039112 Manuel utilisateur

Porter-Cable

Porter-Cable PXCMF226VW Manuel utilisateur

Porter-Cable

Porter-Cable CPLDC2541S Manuel utilisateur

Porter-Cable

Porter-Cable C2555 Manuel utilisateur

Porter-Cable

Porter-Cable CPFAC2600P Manuel utilisateur

Porter-Cable

Porter-Cable PXCMSAC420VW Manuel utilisateur

Porter-Cable

Porter-Cable CPLC7060V Manuel utilisateur

Manuels Compresseur d'air populaires d'autres marques

Sparmax

Sparmax DC-25XR Manuel utilisateur

KAESER

KAESER M122 Manuel utilisateur

GMC

GMC GAC1500 Manuel utilisateur

Briggs & Stratton

Briggs & Stratton Air Compressor Manuel utilisateur

Fini

Fini F3GST2TK Manuel utilisateur

Industrial Air

Industrial Air CP1580325 Manuel de programmation

Campbell Hausfeld

Campbell Hausfeld RP3300 Guide de démarrage rapide

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Manuel utilisateur

Hitachi

Hitachi EC99S Manuel de l'opérateur

Parkside

Parkside PKO 270 A1 Manuel utilisateur

Sullair

Sullair 185 Manuel utilisateur

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Manuel utilisateur

Ferm

Ferm CRM1046 Manuel utilisateur

BE AC153 Manuel utilisateur

RIDGID

RIDGID OF25150A Manuel utilisateur

Johnson Controls

Johnson Controls QUANTUM LX Manuel

Sears

Sears Craftsman 919.167463 Manuel utilisateur

Ring Automotive

Ring Automotive RAC700 Manuel utilisateur