Plantronics .Audio 995 Manuel utilisateur
Plantronics .Audio™995
User Guide
ii
Welcome
Congratulations on purchasing your new Plantronics .Audio™995.
This User Guide contains instructions for setting up and using the
.Audio 995. Please refer to the separate For Your Safety guide for
important product safety and charging information prior to installation
or use.
Getting Assistance
The Plantronics Technical Assistance Center is ready to assist
you. You can find answers to frequently asked questions, ask
a question using e-mail, receive service over the Internet, or speak
directly with a representative. Call (800) 544-4660 or visit
www.plantronics.com/support
Registering Your Product
Visit www.plantronics.com/product registration to register your
product online so we can provide you with the best service and
technical support.
iii
EN
Contents
Range ...............................................................................................iv
Package Contents and Features...................................................... 1
Charging Your Headset Using the USB Charger.............................. 2
Using Your Headset.......................................................................... 3
Pairing Your Headset........................................................................ 4
How to Manually Pair Your Headset and Adapter................... 4
Headset Controls.............................................................................. 5
Operating Systerms Configuration................................................... 6
Indicator Lights................................................................................. 8
Product Specifications ..................................................................... 9
Troubleshooting ............................................................................. 10
Regulatory Notices......................................................................... 12
Limited Warranty ............................................................................ 14
iv
Important Note on Wireless Range
The .Audio 995 headset has a wireless range of up
to 40 feet. However, wireless performance may be
affected by nearby objects including walls, metal
items, and other wireless devices. When you move
the headset to the edge of its wireless range, audio
may become distorted and will eventually cut out.
Move closer to the wireless adapter to restore clear
audio.
1
EN
Package Contents and Features
Volume Up
Status Lights
Play/Pause
Microphone
Volume Down
Track Skip Forward/
Fast Forward
Power On/Off
Status Lights
Connect/Pair
Wireless Adapter
Mute Microphone
2
Charging Your Headset Using the USB Charger
Before using your headset for the first time,
charge it for at least one hour. A full charge takes
approximately three hours.
1 Connect the charger cable to the headset.
2 Plug the charger into the USB port on your
computer.
While your headset is charging the indicator glows
red. When your headset is fully charged, the indicator
turns off.
NOTE Charging time depends on the amount of
power your USB device provides.
CHARGING TIME
3-4 hours ................
Full charge
1 hour .....................
Minimum charge
before first use
3
EN
Using Your Headset
Congratulations, you can now listen to your favorite music or talk with friends and family using your new
wireless headset.
Using Your Headset
1 Make sure that your headset is fully charged. When fully charged, the red status light turns
off.
Do not use your headset while it is connected to the charger.
2 Connect the wireless adapter to a USB port on your computer.
Your computer and USB hub (if using) should be turned on.
3 After removing your headset from the charger, press the Power button to turn the headset on.
The headset and the adapter should connect immediately, and the indicator lights on both headset and
wireless adapter will be solid blue. If you cannot hear anything through your headset, try adjusting the
volume up or restarting the media application.
NOTE If steps 1 through 3 do not work, refer to “Pairing Your Headset” on page 4 to manually pair your
headset and adapter.
4
Pairing Your Headset
How to Manually Pair Your Headset and
Adapter
Your headset and adapter are factory pre-paired,
and should automatically connect with each
other. Should your headset and adapter become
unpaired, you can initiate pairing manually:
1 Press and hold the Power and Connect
buttons on the headset and adapter for 4
seconds.
The status lights on the headset and adapter
will rapidly flash blue.
2 The headset and adapter will automatically
attempt to pair.
If the pairing is successful the status lights will
glow solid blue; if unsuccessful, both headset
and adapter will stay in pairing mode.
If manual pairing was unsuccessful, and you want
to re-attempt the pairing process, you must first
take your headset and adapter out of pairing
mode.
3 Turn headset off
4 Single press the Connect/Pair button on
the adapter, then repeat steps 1 and 2.
NOTE If your headset and adapter are separated
and lose their connection after being successfully
paired, they will automatically reconnect when
they come back into range of each other. If they
remain out of range for more than 30 seconds, the
headset will go into sleep mode, but will reconnect
automatically with the adapter once it is back in
range. If the headset is out of range for more than
15 minutes, it automatically shuts off.
5
EN
Headset Controls
Adjust volume Increase: Press +
Decrease: Press -
Minimum volume: Continually press -
Mute speakers: Press
WARNING Do not use headsets at high volumes for an extended period of
time. Doing so can cause hearing loss. Always listen at moderate levels. See www.
plantronics.com/healthandsafety for more information on headsets and hearing.
Muting the
microphone
Mute: Lift the boom to full stop.
Unmute: Lower the boom.
CAUTION Do not force the boom past its upper or lower limits.
Music controls Press to Play or Pause/Mute music.
Press to skip track forward.
Press and hold to fast forward.
NOTE Some applications, such as iTunes, must be the active window in order for
play, pause and skip to work properly.
6
Operating Systems Configuration
Your .Audio 995 headset works with any USB-
compliant computer. The headset will automatically
be set as the active audio device once the wireless
USB Adapter is plugged in. Below are details on
how to set the audio device for the most popular
operating systems.
NOTE On-ear controls may not function properly
with operating systerms earlier than Windows XP.
Windows XP®
1 Go to Start > Control Panel > Sounds and
Audio Devices.
2 On the Audio tab, select “Plantronics
Wireless Audio” as the Sound Playback
and Sound Recording device.
3 On the Voice tab, select the “Plantronics
Wireless Audio” as the Voice Playback and
Voice Recording device.
4 On the Volume tab, adjust the Volume
Slider as necessary. Do not select the
Mute option.
5 Select OK.
Autres manuels pour .Audio 995
4
Table des matières
Autres manuels Plantronics casque
Plantronics
Plantronics Blackwire C710 Manuel utilisateur
Plantronics
Plantronics Savi Office WO10 Manuel utilisateur
Plantronics
Plantronics Voyager PRO UC v2 Manuel utilisateur
Plantronics
Plantronics SUPRA Manuel utilisateur
Plantronics
Plantronics Blackwire 3300 Series Manuel utilisateur
Plantronics
Plantronics Voyager 510S Manuel utilisateur
Plantronics
Plantronics AVAYA AWH-65-USB Guide de référence
Plantronics
Plantronics Explorer 320 Manuel utilisateur
Plantronics
Plantronics sp05 Manuel utilisateur
Plantronics
Plantronics BLACKWIRE C210-220 MOC - S Manuel utilisateur
Plantronics
Plantronics Discovery 640E Manuel utilisateur
Plantronics
Plantronics M140 - QUICK START GUIDES Manuel utilisateur
Plantronics
Plantronics B230-M Manuel utilisateur
Plantronics
Plantronics VOYAGER PRO Manuel utilisateur
Plantronics
Plantronics Blackwire 600 Manuel utilisateur
Plantronics
Plantronics Savi 445 Manuel utilisateur
Plantronics
Plantronics Explorer 200 Series Manuel utilisateur
Plantronics
Plantronics CS510A Manuel utilisateur
Plantronics
Plantronics CS50 Manuel utilisateur
Plantronics
Plantronics Explorer 50 Manuel utilisateur
