Planet VF-10X-KIT Manuel utilisateur
Optical Fiber Transmission System
VF-10x-KIT
User’s Manual
Trademarks
Copyright © PLANET Technology Corp. 2015
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
The information in this manual is subject to change without
notice. All other trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will
work properly in all environments and applications, and makes
no warranty and representation, either implied or expressed,
with respect to the quality, performance, merchantability, or
tness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual
is accurate; PLANET disclaims liability for any inaccuracies or
omissions that may have occurred.
Information in this User’s Manual is subject to change without
notice and does not represent a commitment on the part of
PLANET. PLANET assumes no responsibility for any inaccuracies
that may be contained in this User’s Manual. PLANET makes no
commitment to update or keep current the information in this
User’s Manual, and reserves the right to make improvements
to this User’s Manual and/or to the products described in this
User’s Manual, at any time without notice.
If you nd information in this manual that is incorrect,
misleading, or incomplete, we would appreciate your comments
and suggestions.
FCC Warning
This equipment has been tested and found to comply with the
regulations for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this user’s guide, may
cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct
the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.
Energy Saving Note of the Device
This power required device does not support Stand by mode
operation.
For energy saving, please remove the DC-plug or push the
hardware Power Switch to OFF position to disconnect the device
from the power circuit. Without removing the DC-plug or switch
off the device, the device will still consume power from the
power source. In the view of Saving the Energy and reduce the
unnecessary power consuming, it is strongly suggested to power
off or to remove the DC-plug for the device if this device is not
intended to be active.
WEEE Warning
To avoid the potential effects on the environment and human
health as a result of the presence of hazardous substances in
electrical and electronic equipment, end users of electrical
and electronic equipment should understand the meaning of
the crossed-out wheeled bin symbol. Do not dispose of WEEE
as unsorted municipal waste and have to collect such WEEE
separately.
Revision
Video over Optical Fiber Media Converter User’s Manual
For Models: VF-10x-T / VF-10x-R
Rev 1.2 (July 2015)
Part No.: 2350-AA3700-002
Table of Contents
1. Introduction ..................................................................... 6
1.1 Check List ................................................................. 6
1.2 Introduction To Video Over Fiber Converter .................. 6
1.3 Key Features.............................................................. 7
1.4 Product Specication .................................................. 7
2. Hardware Description ...................................................... 11
2.1 Front Panel .............................................................. 11
2.1.1 Ports connection ............................................. 12
2.1.2 LED Indicators ................................................ 12
2.2 Rear Panel............................................................... 13
3 Installing The Converter .................................................. 14
3.1 Limitation ................................................................ 14
3.2 Stand-alone Installation ............................................ 14
3.3 Chassis Installation and Rack Mounting ...................... 16
3.4 Optional DIN-rail Mounting........................................ 18
4. Power Information .......................................................... 20
6
1. Introduction
1.1 Check List
Check your package for the following parts:
lVF-10x-T – Video over Fiber Media Converter / Transmitter x 1
lVF-10x-R – Video over Fiber Media Converter / Receiver x 1
l5V/2A Power Adapter x 2
lUser’s Manual x 1
If any of these pieces are missing or damaged, please contact
your dealer immediately; if possible, retain the carton including
the original packing material, and use them again to repack the
product in case there is a need to return it to us for repair.
1.2 Introduction To Video Over Fiber Converter
PLANET Video over Fiber Converter kit consists of a Video
Transmitter, VF-10x-T, and a Video Receiver, VF-10x-R. It is a
digital ber-optic transmission system which provides customers
with a cost-effective solution for transmission of one channel
uncompressed digital video and one reverse RS485 async-data
over one single ber optic cable. It is an adjustable device for
providing high-quality, real-time video. The plug-and-play design
makes the installation more convenient and easier. The system
can be widely used in intelligent transportation systems (ITS),
trafc surveillance, security monitoring, automation control,
intelligent residential districts and so on.
Typical Applications
nIntelligent Transportation Systems (ITS)
nToll Collection
n Trafc Surveillance
7
n Air Trafc Management (ATM)
nRail Signaling
nPerimeter Alarms and Area Monitoring
nTelemedicine and Teleconference
nIndustrial Surveillance
nIntelligent Building
1.3 Key Features
n Video + Data over ber transmission
n8 bit Video Signal digital sampling
nPAL, NTSC, SECAM compatible
nData Type: RS485
nStandalone or work with PLANET MC-700/1500/1500R
Media Converter Chassis
nCompact in size, wall-mount design, easy installation
1.4 ProductSpecications
Model VF-10x-KIT Series
Video Characteristic
Video Channel 1-channel bi-direction
Signal Mode NTSC/PAL
Video Connector BNC
Video Input/Output
Impedance 75ohm/unbalanced interface
Video Input/Output
Voltage 1.0 Vpp/Typical peak-peak value
8
Video Bandwidth 6.5MHz
Video Digital Bit
Width 8/10 bit
Differential Gain
(DG) < 1.3% (typical value)
Differential Phase
(DP) < 1.3° (typical value)
SNR Weighted 63dB (typical value)
Data Interface
Data Channel 1 channel
Physical Protocol RS485
Operation Mode Simplex
Data Connector 3-pin terminal block with screw clamps
Data Rate DC-115.2Kbps
Data Distance RS485: 0-1200m
Bit Error Rate (BER) < 10ns
Optical Interface
Optical Connector
VF-101-KIT ST
VF-102-KIT FC
VF-102SC-KIT SC
VF-102S15-KIT SC
VF-106-KIT WDM
Distance
VF-101-KIT 2km for multi-mode
VF-102-KIT 20km for single-mode
VF-102SC-KIT 2km for multi-mode
VF-102S15-KIT 15km for single-mode
VF-106-KIT 20km for single-mode
9
Optical Wavelength
VF-101-KIT VF-101-T TX & RX: 1310nm
VF-101-R TX & RX: 1310nm
VF-102-KIT
VF-102-T TX: 1310nm,
RX: 1550nm
VF-102-R TX: 1550nm,
RX: 1330nm
VF-102SC-KIT VF-102SC-T TX & RX: 1310nm
VF-102SC-R TX & RX: 1310nm
VF-102S15-KIT VF-102S15-T TX & RX: 1310nm
VF-102S15-R TX & RX: 1310nm
VF-106-KIT
VF-106-T TX: 1310nm,
RX: 1550nm
VF-106-R TX: 1550nm,
RX: 1330nm
Launch Power
(dBm)
VF-101-KIT Max.: -14, Min.: -19
VF-102-KIT Max.: -7, Min.: -14
VF-102SC-KIT Max.: -14, Min.: -19
VF-102S15-KIT Max.: -7, Min.: -20
VF-106-KIT Max.: -8, Min.: -14
Receive Sensitivity
(dBm)
VF-101-KIT -34.5dBm
VF-102-KIT -32dBm
VF-102SC-KIT -34.5dBm
VF-102S15-KIT -28dBm
VF-106-KIT -31dBm
10
Max. Input Power
(dBm)
VF-101-KIT -14
VF-102-KIT 0
VF-102SC-KIT -14
VF-102S15-KIT -8
VF-106-KIT 0
Cable 50/125μm or 62.5/125μm multi-mode cable
9/125μm single-mode cable
Hardware Specication
LED Indicators
• One for Power
• One for Video
- Green, Link
• One for Fiber Optic
- Green, Link
Dimensions
(W x D x H) 94 x 70 x 26 mm
Weight 215g
Power Requirement 5V/2A
Power Consumption 4.8 watts (maximum)
Mechanical Metal
Compatible
Converter Chassis MC-700/MC-1500/MC-1500R
Standards Conformance
Regulatory
Compliance FCC Part 15 Class A, CE
Environment
Operating Temperature : 0 ~ 50 degrees C
Relative Humidity : 5 ~ 95% (non-condensing)
Storage Temperature : -10 ~ 70 degrees C
Relative Humidity : 5 ~ 95% (non-condensing)
Table des matières
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
