Planet GSW-1601 Manuel utilisateur

16/24-Port 10/100/1000Mbps

Gigabit Ethernet Switch

GSW-1601/GSW-2401

User's Manual

Trademarks

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other trademarks

belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all

environments and applications, and makes no warranty and representation, either

implied or expressed, with respect to the quality, performance, merchantability, or

tness for a particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate;

PLANET disclaims liability for any inaccuracies or omissions that may have

occurred.

Information in this User’s Manual is subject to change without notice and does not

represent a commitment on the part of PLANET. PLANET assumes no responsibility

for any inaccuracies that may be contained in this User’s Manual. PLANET makes

no commitment to update or keep current the information in this User’s Manual,

and reserves the right to make improvements to this User’s Manual and/or to the

products described in this User’s Manual, at any time without notice.

If you nd information in this manual that is incorrect, misleading, or incomplete,

we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with

the Instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

WEEE Warning

To avoid the potential effects on the environment and human health as a

result of the presence of hazardous substances in electrical and electronic

equipment, end users of electrical and electronic equipment should

understand the meaning of the crossed-out wheeled bin symbol. Do not

dispose of WEEE as unsorted municipal waste and have to collect such

WEEE separately.

Revision

PLANET 16/24-Port 10/100/1000Mbps Gigabit Ethernet Switch User's Manual

For Models: GSW-1601 / GSW-2401

Revision: 3.0 (April. 2008)

Part No: EM_GSW1624v3 (2011-A50140-000)

TABLE OF CONTENTS

1. INTRODUCTION.......................................................................................... 5

1.1 Package Contents ................................................................................ 5

1.2 How to Use This Manual ..................................................................... 5

1.3 Product Features ................................................................................. 5

1.4 Product Specications .......................................................................... 6

2. INSTALLATION............................................................................................ 7

2.1 Product Description.............................................................................. 7

2.1.1 Product Overview ....................................................................... 7

2.1.2 Switch Front Panel ..................................................................... 8

2.1.3 LED Indicators ........................................................................... 8

2.1.4 Switch Rear Panel ...................................................................... 8

2.2 Installing the Switch ............................................................................ 9

2.2.1 Desktop Installation.................................................................... 9

2.2.2 Rack Mounting ..........................................................................10

3. Switch Operation .......................................................................................12

3.1 Address Table.....................................................................................12

3.2 Learning ............................................................................................12

3.3 Forwarding & Filtering.........................................................................12

3.4 Store-and-Forward..............................................................................12

3.5 Auto-Negotiation ................................................................................13

4. Troubleshooting .........................................................................................14

APPENDIX A NETWORKING CONNECTION .........................................................15

A.1 Switch's RJ-45 Pin Assignments ............................................................15

A.2 RJ-45 cable Pin Assignments ................................................................15

1. INTRODUCTION

1.1 Package Contents

Check the contents of your package for following parts:

● Gigabit Ethernet Switch x 1

● User's manual x 1

● Power cord x 1

● Rubber feet x 4

● Two rack-mounting brackets with attachment screws x 1

If any of these are missing or damaged, please contact your dealer immediately,

if possible, retain the carton including the original packing material, and use them

against to repack the product in case there is a need to return it to us for repair.

1.2 How to Use This Manual

This Gigabit Ethernet Switch User Manual is structured as follows:

Chapter 2 Installation

The chapter explains the feature, functionality and the physical installation of the

Gigabit Ethernet Switch.

Chapter 3 Switch operation

The chapter explains the Gigabit Ethernet Switch transmit operation.

Chapter 4 Troubleshooting

The chapter explains the troubleshooting of the Gigabit Ethernet Switch.

Appendix A

This chapter contains cable information of the Gigabit Ethernet Switch.

In the following section, the term “Gigabit Ethernet Switch” means the GSW-

1601 / GSW-2401.

1.3 Product Features

● Comply with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab

1000Base-T Ethernet standard

● 16 / 24-Port 10/100/1000Mbps Gigabit Ethernet ports

● Features Store-and-Forward mode with wire-speed ltering and forwarding rates

● Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode,

ow control and auto-negotiation

● IEEE 802.3x ow control for full duplex operation and Backpressure for half

duplex operation

● Integrated address look-up engine, support 8K absolute MAC addresses

● 9K Jumbo packet support

● Automatic address learning and address aging

● Supports Auto MDI/MDI-X function

● Support CSMA/CD protocol

● 100~240VAC, 0.6A, 50~60Hz universal Power input

● FCC, CE class A compliant

1.4 Product Specications

Product GSW-1601 GSW-2401

Hardware Specication

10/100/1000Base-T MDI/MDIX

Ports

16 24

Throughput (packet per second)

23.8Mpps 35.7Mpps

Switch fabric

32Gbps 48Gbps

Weight

2.50kg 2.71kg

Power Consumption / Dissipation

21 watts / 71 BTU 34 watts / 116 BTU

Power Requirement

100~240 VAC, 0.6A, 50-60 Hz

Dimensions (W x D x H)

440 x 180 x 45mm, 1U height

Switch Processing Scheme

Store-and-Forward

Address Table

8K entries

Jumbo packet size

Flow Control

Back pressure for half duplex, IEEE 802.3x Pause

Frame for full duplex

Temperature

Operating: 0~50 degree C

Storage -40~70 degree

Humidity Operating:

5% to 90%, Storage: 5% to 90% (Non-condensing)

Standards Conformance

Regulation Compliance

FCC Part 15 Class A, CE

Standards Compliance

IEEE 802.3 (Ethernet)

IEEE 802.3u (Fast Ethernet)

IEEE 802.3ab(Gigabit Ethernet)

IEEE 802.3x (Full-duplex ow control)

2. INSTALLATION

This section describes the functionalities of the Gigabit Ethernet Switch’s

components and guides how to install it on the desktop. Basic knowledge of

networking is assumed. Please read this chapter completely before continuing.

2.1 Product Description

The PLANET Gigabit Ethernet Switch is 10/100/1000Mbps Gigabit Ethernet Switch

with 16/24 ports respectively, and non-blocking wire-speed performance. With

a 32/48Gbps internal switching fabric, the Gigabit Ethernet Switch can handle

extremely large amounts of data in a secure topology linking to a backbone or

high capacity servers.

The Gigabit Ethernet Switch has 8K MAC Address table. The Gigabit Ethernet

Switch offers wire-speed packets transfer performance without risk of packet loss.

The high data throughput of Gigabit Ethernet Switch makes it ideal for most Gigabit

environments, especially while network upgrades to a Gigabit environment.

All RJ-45 copper interfaces support 10/100/1000Mbps Auto-Negotiation for optimal

speed detection through RJ-45 Category 6, 5 or 5e cables. Support standard for

Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device

without requiring special straight or crossover cables.

The Flow Control function allows your Gigabit Ethernet Switch supported routers

and Servers to directly connect to this Switch for fast, reliable data transfer.

2.1.1 Product Overview

The PLANET Gigabit Ethernet Switch with 16/24 RJ-45 10/100/1000Mbps ports for

high-speed network connectivity. The Gigabit Ethernet Switch can also automatically

identify and determine the correct transmission speed and half/full duplex mode

of the attached devices with its 16/24 ports. The Gigabit port with jumbo frame

feature supported, can handle extremely large amounts of data transmission in a

secure topology linking to a backbone or high-power servers.

The Gigabit Ethernet Switch also supports Store-and-Forward forwarding scheme

to ensure low latency and high data integrity, eliminates unnecessary trafc and

relieves congestion on critical network paths. With an intelligent address recognition

algorithm, the Gigabit Ethernet Switch could recognize up to 8K different MAC

address and enables ltering and forwarding at full wire speed.

2.1.2 Switch Front Panel

Figure 2-1 & 2-2 shows a front panel of Gigabit Ethernet Switch.

Figure 2-1 GSW-1601 front panel

Figure 2-2 GSW-2401 front panel

2.1.3 LED Indicators

GSW-1601 / GSW-2401

System

LED Color Function

PWR Green Lights to indicate that the Switch has power.

FAN Green Lights to indicate that FAN is operating.

Per 10/100/1000Mbps port

LED Color Function

LNK / ACT Green

Lights to indicate the link through that port is

established successfully.

Blinks indicate that the Switch is actively sending or

receiving data over that port.

1000 Green Lights to indicate the port is run at 1000Mbps.

Off: indicate that the port is operating at 10/100Mbps.

2.1.4 Switch Rear Panel

Figure 2-3 & 2-4 shows a rear panel of Gigabit Ethernet Switch.

Figure 2-3 GSW-1601rear panel

Figure 2-4 GSW-2401 rear panel

Power

Notice

1. The device is a power-required device, it means, it will not work

till it is powered. If your networks should active all the time,

please consider using UPS (Uninterrupted Power Supply) for your

device. It will prevent you from network data loss or network

downtime.

2. In some area, installing a surge suppression device may

also help to protect your Gigabit Ethernet Switch from being

damaged by unregulated surge or current to the Switch or the

power adapter.

2.2 Installing the Switch

This part describes how to install your Gigabit Ethernet Switch and make

connections to it. Please read the following topics and perform the procedures in

the order being presented.

Note

This Gigabit Ethernet Switch does not need software configuration.

2.2.1 Desktop Installation

To install the Gigabit Ethernet Switch on desktop, simply follow the next steps:

Step 1: Attach the rubber feet to the recessed areas on the bottom of the Gigabit

Ethernet Switch.

Step 2: Place the Gigabit Ethernet Switch on desktop near an AC power source.

Step 3: Keep enough ventilation space between the Gigabit Ethernet Switch and

the surrounding objects.

Note

When choosing a location, please keep in mind the environmental

restrictions discussed in Chapter 1, Section 1.4 Product Specifica-

tions.

Step 4: Connect your Gigabit Ethernet Switch to network devices.

A. Connect one end of a standard network cable to the 10/100/1000 RJ-45 ports on the

front of the Gigabit Ethernet Switch.

B. Connect the other end of the cable to the network devices such as printer servers, work-

stations or routers…etc.

Note

Connection to the Gigabit Ethernet Switch requires UTP Category 5

network cabling with RJ-45 tips. For more information, please see

the Cabling Specification in Appendix A.

Step 5: Supply power to the Gigabit Ethernet Switch.

A. Connect one end of the power cable to the Gigabit Ethernet Switch.

B. Connect the power plug of the power cable to a standard wall outlet.

When the Gigabit Ethernet Switch receives power, the Power LED should remain

solid Green.

2.2.2 Rack Mounting

To install the Gigabit Ethernet Switch in a 19-inch standard rack, follow the

instructions described below.

Step 1: Place your Gigabit Ethernet Switch on a hard at surface, with the front

panel positioned towards your front side.

Step 2: Attach a rack-mount bracket to each side of the Switch with supplied

screws attached to the package. Figure 2-5 shows how to attach brackets

to one side of the Gigabit Ethernet Switch.

Figure 2-5 Attaching the brackets to the Gigabit Ethernet Switch

Caution

You must use the screws supplied with the mounting brackets.

Damage caused to the parts by using incorrect screws would invali-

date your warranty.

Step 3: Secure the brackets tightly.

Autres manuels pour GSW-1601

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Planet Changer

Planet

Planet IFGS-1022HPT Manuel utilisateur

Planet

Planet IGS-1020PTF Series Manuel utilisateur

Planet

Planet Switch Manuel utilisateur

Planet

Planet VC-810S Manuel utilisateur

Planet

Planet GS-6320-8P2X Manuel utilisateur

Planet

Planet IGS-4215 Series Manuel utilisateur

Planet

Planet IGS-824UPT Manuel utilisateur

Planet

Planet GSD-805 Manuel utilisateur

Planet

Planet FSD-5816 Manuel utilisateur

Planet

Planet NOVASwitch GSW-1200S Manuel utilisateur

Planet

Planet GS-5220 Series Manuel utilisateur

Planet

Planet WGS-6325-8UP2X Manuel utilisateur

Planet

Planet HPOE-1200G Manuel utilisateur

Planet

Planet IKVM-8000 Manuel utilisateur

Planet

Planet FSD-808P Manuel utilisateur

Planet

Planet IPOE-270 Manuel utilisateur

Planet

Planet XGS-5240-24X2QR Manuel utilisateur

Planet

Planet EH-1600 Manuel utilisateur

Planet

Planet IGS-6325-4T2X Manuel utilisateur

Planet

Planet IGS-6325-20T4C4X Manuel utilisateur

Planet

Planet FSD-808HP Manuel utilisateur

Planet

Planet ISW-1022M Manuel utilisateur

Planet

Planet GS-5220 Series Manuel utilisateur

Planet

Planet XGS-6320-8X8TR Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur