Planet FGSD-1008HPS Manuel utilisateur
8/16/24-Port 10/100TX 802.3at PoE +
2-Port Gigabit TP/SFP Combo
Managed Ethernet Switch
FGSD-1008HPS/FGSW-1816HPS/FGSW-2624HPS/
FGSW-2624HPS4
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Starting Web Management .......................................................................... 5
3.1 Logging in to the Managed PoE Switch .................................................. 5
3.2 SavingCongurationviaWeb ............................................................... 7
4. Terminal Setup (FGSW-2624HPS Only) .......................................................... 8
4.1 Logging on to Console ......................................................................... 9
4.2 ConguringIPAddress......................................................................... 9
4.3 StoringCurrentSwitchConguration....................................................10
5. RecoveringBacktoDefaultConguration.....................................................11
6. Customer Support .....................................................................................12
3
1. Package Contents
Thank you for purchasing PLANET 8/16/24-Port 10/100TX 802.3at PoE + 2-Port
Gigabit TP/SFP Combo Managed Ethernet Switch, FGSD-1008HPS, FGSW-1816HPS,
FGSW-2624HPS and FGSW-2624HPS4.
“Managed PoE Switch” mentioned in this quick installation guide refers to the
above switch products.
Open the box of the Managed PoE Switch and carefully unpack it. The box should
contain the following items:
zThe Managed PoE Switch x 1
zQuickInstallationGuidex1
zRS232 to RJ45 Cable x 1 (FGSW-2624HPS only)
zRubber Feet x 4
zTwoRack-mountingBracketswithAttachmentScrewsx1
zPower Cord x 1
zSFP Dust-proof Caps x 2
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
zWorkstations running Windows 10/XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerial Port Connection (Terminal) (FGSW-2624HPS only)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
The above Workstations have been installed with terminal emulator,suchas
HyperTerminalincludedinWindowsXP/2003.
Serial cable -- one end is attached to the RS232 serial port, while the other
end to the console port of the FGSW-2624HPS.
zEthernet Port Connection
Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser and JAVA runtime environment
plug-in.
Note
It is recommended to use Internet Explorer 8.0 or above to access
the Managed PoE Switch. If the Web interface of the Managed PoE
Switch is not accessible, please turn off the anti-virus software or
firewall and then try it again.
5
3. Starting Web Management
The following shows how to start up the Web Management of the Managed
PoE Switch. Note the Managed PoE Switch is congured through an Ethernet
connection. Please make sure the manager PC must be set to the same IP subnet
address.
Forexample,thedefaultIP addressoftheManagedPoESwitchis192.168.0.100,
then the manager PC should be set to 192.168.0.x (where x is a number
between1and254,except100),andthedefaultsubnetmaskis255.255.255.0.
PC / Workstation
with Telnet Client
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address:
192.168.0.100
Figure 3-1: IP Management Diagram
Note
The following web screen is based on the FGSW-2624HPS4; the
display of the FGSW-2624HPS4 is the same as that of the FGSD-
1008HPS,FGSW-1816HPSandFGSW-2624HPS.
3.1 Logging in to the Managed PoE Switch
1. Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100(thefactorydefaultIPaddressortheonethatyouhave
just changed in console) to access the Web interface.
2.When the following dialog box appears, please enter the default user name and
password “admin” (or the password you have changed via console). The login
screen in Figure 3-2 appears.
6
DefaultIPAddress:192.168.0.100
DefaultUsername:admin
Default Password: admin
Figure 3-2: Login Screen
3.Afterenteringthepassword,themainscreenappearsasFigure3-3shows.
Figure 3-3: Web Main Screen of Managed PoE Switch
7
The Switch Menu on the top and left of the Web page lets you access all the
commands and statistics the Managed PoE Switch provides.
Figure 3-4: Switch Menu
Now, you can use the Web management interface to continue the Switch
management or manage the Switch by console interface.
Please refer to the user’s manual for more.
3.2 SavingCongurationviaWeb
To save all applied changes and set the current conguration as a startup
conguration, the startup-conguration le will be loaded automatically across a
system reboot.
1. Click the Save icon on the top Switch Menu bar.
Figure 3-5: Save Cong -- Hot key
8
4. Terminal Setup (FGSW-2624HPS Only)
Tocongure thesystem,connectaserialcabletoaCOMporton aPCornotebook
computer and to RJ45 type of serial port of the FGSW-2624HPS.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: FGSW-2624HPS Console Connectivity
A terminal program is required to make the software connection to the FGSW-
2624HPS.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud: 115200
Data bits: 8
Parity:None
Stop bits: 1
Flow control:
Figure 4-2: COM Port Conguration
9
4.1 Logging on to Console
Once the terminal is connected to the device, power on the FGSW-2624HPS and
the terminal will display “running testing procedures”. Then, the following message
asks to log in user name and password. The factory default user name and
password are shown as follows and the login screen in Figure 4-3 appears.
Username:admin
Password: admin
Welcome to FGSW-2624HPS it is Thu Jan 00:01:47 UTC 1970
Figure 4-3: FGSW-2624HPS Console Login Screen
The user can now enter commands to manage the FGSW-2624HPS. For a detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
Note
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
face.
4.2 ConguringIPAddress
TheFGSW-2624HPSisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follows:
ShowthecurrentIPAddress
1.Atthe“>”prompt,enter“show ip”.
10
2.ThescreendisplaysthecurrentIPaddressasshowninFigure4-4.
> show ip
IPAddress:192.168.0.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.254
DNSServer:
DHCP Client: Disabled
Figure 4-4: IP Information Screen
ConguringIPAddress
3.At the “>” prompt, enter the following command and press <Enter> as shown
in Figure 4-5.
>congipaddress192.168.1.100
>congipsubmask255.255.255.0
Figure 4-5: Conguring IP Address Screen
The previous command would apply the following settings for the FGSW-2624HPS.
IPAddress:192.168.1.100
Subnet Mask: 255.255.255.0
4.Repeatstep1tocheckiftheIPaddresshaschanged.
4.3 StoringCurrentSwitchConguration
Atthe“>”prompt,enterthefollowingcommandandpress<Enter>.
> save
Figure 4-6: Saving Current Conguration Command Screen
If the IP is successfully congured, the FGSW-2624HPS will apply the new IP
address setting immediately. You can access the Web interface of the FGSW-
2624HPSthroughthenewIPaddress.
Note
If you are not familiar with the console command or the related
parameter, enter “?” anytime in console to get the help descrip-
tion.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Planet Changer
Planet
Planet WSD-800 Manuel utilisateur
Planet
Planet WGSD-10020 Manuel utilisateur
Planet
Planet GSW-1600 Manuel utilisateur
Planet
Planet VC-820M Manuel utilisateur
Planet
Planet VC-810S Manuel utilisateur
Planet
Planet IPOE-270 Manuel utilisateur
Planet
Planet IGS-1020PTF Series Manuel utilisateur
Planet
Planet GSW-1402S Manuel utilisateur
Planet
Planet IGS-5227-4MP2MT Manuel utilisateur
Planet
Planet MII Series Manuel utilisateur
Planet
Planet GSD-801 Manuel utilisateur
Planet
Planet FGSW-1828PS Manuel utilisateur
Planet
Planet ISW-504PT Manuel utilisateur
Planet
Planet GS-6320-8P2X Manuel utilisateur
Planet
Planet GSW-1600HP Manuel utilisateur
Planet
Planet IDL-2402 Manuel utilisateur
Planet
Planet WGSD-8020P Manuel utilisateur
Planet
Planet IGS-4215-8UP4X Manuel utilisateur
Planet
Planet WGSW-24000 Manuel utilisateur
Planet
Planet FNSW-1601 Manuel utilisateur
