Planet IPOE-E174 Manuel utilisateur

1-Port Ultra PoE to 4-Port 802.3af/at Gigabit

PoE Extender

IPOE-E174

User’s Manual

Table of Contents

1. Introduction.............................................................................. 3

1.1 Packet Contents.................................................................. 3

1.2 Application Diagram ............................................................ 4

1.3 Key Features ...................................................................... 5

1.4 TechnicalSpecications ....................................................... 7

1.5 Power over Ethernet Budget ...............................................10

2. InSTALLATION..........................................................................11

2.1 Physical Dimensions ...........................................................11

2.2 Front Panel .......................................................................12

2.3 Mounting Installation..........................................................14

2.3.1DIN-rail Mounting.......................................................14

2.3.2Wall-mount Plate Mounting .........................................15

2.4 Connecting IPOE-E174 to Power Source Equipment (PSE) .....16

2.5 Connecting IPOE-E174 to Powered Device (PD) ....................17

3. Customer Support ....................................................................19

1. Introduction

1.1 Packet Contents

Thank you for purchasing PLANET IPOE-E174- 1-Port Ultra PoE

to 4-Port 802.3af/at Gigabit PoE Extender. Open the box of

the IPOE-E174 and carefully unpack it. The box should contain the

following items:

Industrial Power over Ethernet Extender x 1

User’s Manual x 1

RJ45 Dust Cap x 5

Wall Mounting Kit x 1

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original packing

material, and use them again to repack the product in case there is a

need to return it to us for repair.

1.2 Application Diagram

The IPOE-E174 is designed as the repeater to forward both Gigabit

Ethernet data and IEEE 802.3at PoE power, thus extending the range

of PoE installation. With just plug and play and without additional

power supply and setup, one single IPOE-E174 can increase the PoE

range to 200m and drive up four remote PoE IP cameras or wireless

access point.

Ultra PoE Injector

Power

Data

Switch

100meters

Power Line (DC)

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

PoE

1000BASE-T UTP with Ultra PoE

PoE

1.3 Key Features

Physical Port

5-port 10/100/1000BASE-T Gigabit RJ45 interface

1-port data + power input

4-port data + power output

Power over Ethernet

1-port data + power input

Complies with ultra Power over Ethernet end-span and mid-

span PD

Complies with IEEE 802.3at High Power over Ethernet end-span

/ mid-span PD

Supports PoE input power up to 60 watts

4-port data + power output

Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet

/ end-span PSE

Up to 4 IEEE 802.3af / 802.3at devices powered

Supports PoE power up to 30.8 watts for each PoE port

Auto detects powered device (PD)

Extends the range of PoE to an additional 100 meters (328ft.)

Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

Hardware based 10/100Mbps, half / full duplex and 1000Mbps full

duplexmode,owcontrol,auto-negotiationand autoMDI/MDI-X

Features Store-and-Forward mode with wire-speed ltering and

forwarding rates

IEEE 802.3x ow control for full duplex operation and back pres-

sure for half duplex operation

Integrates address look-up engine, supporting 8K absolute MAC

addresses

9K jumbo frame support in 1000Mbps duplex mode

Automatic address learning and address aging

Supports CSMA/CD protocol

Industrial Case / Installation

IP30 aluminum case protection

DIN rail and wall-mount design

Supports EFT protection for 6000V DC power, and 6000V DC

Ethernet ESD protection

-40 to 75 degrees C operating temperature

No external power cable required for installation

Plug and Play installation

Standard Compliance

IEEE 802.3 10BASE-T

IEEE802.3u100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3x Flow Control

IEEE 802.3at High Power over Ethernet

IEEE 802.3af Power over Ethernet

FCC Part 15 Class A, CE

Note

PSE (Power Sourcing Equipment) is a device (switch,

or hub for instance) that provides power in a PoE setup.

Maximum allowed continuous output power per such

device in IEEE 802.3af is 15.4W, and in IEEE 802.3at is

30W.

PD (Powered Device) is a PoE-enabled terminal by

PSE and thus consumes energy, such as PoE IP Phones,

PoE IP cameras, PoE wireless access points, etc.

1.4 TechnicalSpecications

Model IPOE-E174

HardwareSpecications

Network Connector

PoE In Port

1 x 10/100/1000BASE-T Ethernet with ultra

PoE “Data + DC”in,autoMDI/MDI-X,

auto-negotiation RJ45 connector

PoE Out Port

4 x 10/100/1000BASE-T Ethernet with IEEE

802.3af/at PoE “Data + DC” out, auto

MDI/MDI-X,auto-negotiationRJ45connector

Switch Architecture Store-and-Forward switch architecture

MAC Address Table 8K MAC address table with auto learning

function

Data Buffer 1Mbit

Switch Fabric 10Gbps

Switch Throughput 7.44Mpps @ 64Bytes

Flow Control IEEE 802.3x pause frame for full duplex

Back pressure for half duplex

Jumbo Frame 9Kbytes

ESD Protection 6KV DC

EFT Protection 6KV DC

Enclosure IP30 aluminum metal case

Installation DIN rail kit and wall-mount ear

LED Display

System: PWR (Green)

Power Input: Midspan in (Green)

Power Input: Endspan in (Green)

PoE Power Usage (%): 25 (Green)

PoE Power Usage (%): 50 (Green)

PoE Power Usage (%): 75 (Green)

PoE Input Port: LNK/ACT (Green)

PoE Input Port: PoE in (Orange)

Per PoE Output Port: LNK/ACT (Green)

Per PoE Output Port: PoE-in-Use (Orange)

Cable

Twisted-pair cable:

10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100

meters

100BASE-TX:2-pairUTPCat.5,5eupto

100 meters

1000BASE-T: 4-pair UTP Cat. 5e,6 up to

100 meters

Dimensions

(W x D x H) 135 x 87.8 x 56 mm

Weignt 715g

Power Consumption 60 watts / 204.6BTU (Full loading with PoE

function)

Power over Ethernet

PoE Standard

PoE in Port

IEEE 802.3at High Power over Ethernet

end-span / mid-span PD class 4 PD

Per PoE out Port

IEEE 802.3at High Power over Ethernet

end-span PSE

IEEE 802.3af Power over Ethernet end-span

PSE

PoE Power

PoE in Port

50~57V DC, max. 60 watts

Per PoE out Port

44~55V DC, max. 30.8 watts

Power Pin Assignment

PoE in Port

1/2(+), 3/6(-); 4/5(+), 7/8(-)

Per PoE out Port

1/2(+), 3/6(-)

PoE Power Budget

50 watts (max.) @ Ultra PoE input

20 watts (max.) @ IEEE 802.3at PoE+ input

No support @ IEEE 802.3af PoE input

Standards Conformance

Regulation Compliance FCC Part 15 Class A, CE

Stability Testing

IEC60068-2-32 (Free fall)

IEC60068-2-27 (Shock)

IEC60068-2-6 (Vibration)

Standards Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3x Flow Control

IEEE 802.3af Power over Ethernet

IEEE 802.3at High Power over Ethernet

Environment

Operating Temperature: -40 ~ 75 degrees C

Relative Humidity:5 ~ 95% (non-condensing)

Storage Temperature: -40 ~ 85 degrees C

Relative Humidity:5 ~ 95% (non-condensing)

1.5 Power over Ethernet Budget

The following table lists how many PoE devices can be powered by

IPOE-E174:

Power Source PoE Output

Budget*

Max. Number of PDs

supported

PLANET Ultra PoE PSE 50 watts max.

Class 4 PD@25-watt 2 units

Class 3 PD@15-watt 3 units

Class 2 PD@7-watt 4 units

IEEE 802.3at PoE+

PSE 20 watts max.

Class 4 PD@25-watt 0

Class 3 PD@15-watt 1 unit

Class 2 PD@7-watt 2 units

IEEE 802.3af PoE PSE 10 watts max. Class 2 PD@7-watt 1 unit

Remarks

1. The PoE Output Budget means the 4-port PD

aggregated power output. The aggregated power

consumption will be below 50 watts if with ultra PoE

PSE.

2. Please check the power input LED (60W PoE) for

optimal power output. Both mid-span and end-span

LEDs should be turned on for maximum capability.

Autres manuels pour IPOE-E174

Table des matières

Autres manuels Planet Extenseur

Planet

Planet LRP-101C-KIT Manuel utilisateur

Planet

Planet IPOE-E302 Manuel utilisateur

Planet

Planet IVC-234GT Manuel utilisateur

Planet

Planet WGS-E304PT Manuel utilisateur

Planet

Planet IPOE-E174 Manuel utilisateur

Planet

Planet WNAP-1110 Manuel de l'opérateur

Planet

Planet VC-205PT Manuel utilisateur

Planet

Planet IPOE-E172 Manuel utilisateur

Planet

Planet POE-E304 Manuel utilisateur

Planet

Planet IVC-2002 Manuel utilisateur

Planet

Planet POE-E101 Manuel utilisateur

Planet

Planet WTB-1000 Manuel utilisateur

Planet

Planet IHD-200PT Manuel utilisateur

Planet

Planet WAP-7500 Manuel de l'opérateur

Planet

Planet LRE-101C Manuel utilisateur

Planet

Planet WNAP-C3220 Manuel utilisateur

Planet

Planet LRE-101 Manuel utilisateur

Planet

Planet POE-E201 Manuel utilisateur

Planet

Planet LRP-104CET Manuel utilisateur

Planet

Planet PL-510W Manuel utilisateur

Planet

Planet WNAP-1110 Manuel utilisateur

Planet

Planet WNAP-C3220 Manuel utilisateur

Planet

Planet IPOE-E202 Manuel utilisateur

Planet

Planet IPOE-E174 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur