Planet Networking & Communication IPM-4220 Manuel utilisateur

– 1 – – 2 –

– 3 – – 4 –

1. Package Contents

Thank you for choosing PLANET IP-based Switched Power Manager. The

Switched IPM provides the useful function of managing power for any

combination to connect with itself.

Open the box of the Switched IPM and carefully unpack it. The box

should contain the following items:

Switched IP Power Manager x 1 Quick Guide x 1

Power Cord x 1 Rack-mounting Kit (Only for IPM-8220) x 1

Note

If there is any item missing or damaged, please contact

the seller immediately.

2. Installation Precautions

Please set the maximum power-off protection allowed by power circuit

as per the rated current information indicated on the device with

reference to the local state rules, safety procedures and disconnector

deviation.

The unit can only be connected to a grounded power outlet or system.

Make sure the total current output of all the connected systems within

the rated current indicated on the device.

The test results of this device may be inaccurate giving unstable

power supply.

Avoid using this device in places near water or moisture environments.

Use the attachments/accessories specied by the manufacturer only.

Please avoid any items or liquids entering the device because their

contact with dangerous voltage points or short-circuit parts may cause

a re or electric shock.

3 Physical Introduction

IPM-4220

Rear Panel :

45 6 7 8 9

Front Panel :

10 11 12 13 14

System Indicating Light

Slow ashing: Normal operating

Rapid ashing: Normal updating

2Reset and Warning Indicating Light

3Temperature/Humidity Port for IPM-ESB Connection

4Reset Button

5RJ45 Ethernet Port

6USB Connected Port (Future Feature)

COM2/1

2 Com Ports provided to enable terminal control, API control and

2 mutual cascading

8Circuit Breaker Protection

9Power Inlet

10 Power On/Off Switch

11 Power Outlet

Note: The maximum output current is 16 amps.

12 LCD Panel

To display total current, voltage and IP

Switch/Set button

Provide LCD panel in order to switch the total current and IP; set

alarm current

IP Indicating Light

Lights remaining lit: IP displaying

Slow ashing: Max. current of alarm occurrence

Alarm Indicating Light

Lights remaining lit: Alarm has occurred

Slow ashing: There was current overloading

16 Buzzering

17 Power Outlet Indicating Light

Panel Operation

The rst mode of LCD is total current, switching with the Switch/Set

button to show the regular sequence of total current, max. current and

IP shown below:

0.0

192

168

010

001

Total Current

IP Display

IP Display Max. Current

IP Display IP Display

■ Alarm and IP indicating light

will not flash.

■ IP indicating light is flashing

because of overload.

■ IP indicating light remaining lit.

■ IP indicating light is flashing.

 1LCD menu shows the total current. èHold the Switch/Set button

for 3 seconds with a long beep to enter alarm current setting. è

Press the Switch/Set button to increase the alarm current by 0.5A

in each press. èHold the Switch/Set button for 3seconds with a

“beep” to save the setting.

 2Press the Switch/Set button and shows the maximum current.

èHold the Switch/Set button for 3seconds with a long beep to

adjust to a zero point.

 3Press the Switch/Set button to switch the display of each IP

address.

IPM-8220

Rear Panel :

45 6 7 8 9

Front Panel :

10 11 12 13

1516

System Indicating Light

Slow ashing: Normal operating

Rapid ashing: Normal updating

2Reset and Warning Indicating Light

3Temperature/Humidity Port for IPM-ESB Connection

IPM-4220/IPM-8220

Quick Installation Guide

IP-based 4-/8-port Switched

Power Manager

– 1 – – 2 –

– 3 – – 4 –

1. Package Contents

Thank you for choosing PLANET IP-based Switched Power Manager. The

Switched IPM provides the useful function of managing power for any

combination to connect with itself.

Open the box of the Switched IPM and carefully unpack it. The box

should contain the following items:

Switched IP Power Manager x 1 Quick Guide x 1

Power Cord x 1 Rack-mounting Kit (Only for IPM-8220) x 1

Note

If there is any item missing or damaged, please contact

the seller immediately.

2. Installation Precautions

Please set the maximum power-off protection allowed by power circuit

as per the rated current information indicated on the device with

reference to the local state rules, safety procedures and disconnector

deviation.

The unit can only be connected to a grounded power outlet or system.

Make sure the total current output of all the connected systems within

the rated current indicated on the device.

The test results of this device may be inaccurate giving unstable

power supply.

Avoid using this device in places near water or moisture environments.

Use the attachments/accessories specied by the manufacturer only.

Please avoid any items or liquids entering the device because their

contact with dangerous voltage points or short-circuit parts may cause

a re or electric shock.

3 Physical Introduction

IPM-4220

Rear Panel :

45 6 7 8 9

Front Panel :

10 11 12 13 14

System Indicating Light

Slow ashing: Normal operating

Rapid ashing: Normal updating

2Reset and Warning Indicating Light

3Temperature/Humidity Port for IPM-ESB Connection

4Reset Button

5RJ45 Ethernet Port

6USB Connected Port (Future Feature)

COM2/1

2 Com Ports provided to enable terminal control, API control and

2 mutual cascading

8Circuit Breaker Protection

9Power Inlet

10 Power On/Off Switch

11 Power Outlet

Note: The maximum output current is 16 amps.

12 LCD Panel

To display total current, voltage and IP

Switch/Set button

Provide LCD panel in order to switch the total current and IP; set

alarm current

IP Indicating Light

Lights remaining lit: IP displaying

Slow ashing: Max. current of alarm occurrence

Alarm Indicating Light

Lights remaining lit: Alarm has occurred

Slow ashing: There was current overloading

16 Buzzering

17 Power Outlet Indicating Light

Panel Operation

The rst mode of LCD is total current, switching with the Switch/Set

button to show the regular sequence of total current, max. current and

IP shown below:

0.0

192

168

010

001

Total Current

IP Display

IP Display Max. Current

IP Display IP Display

■ Alarm and IP indicating light

will not flash.

■ IP indicating light is flashing

because of overload.

■ IP indicating light remaining lit.

■ IP indicating light is flashing.

 1LCD menu shows the total current. èHold the Switch/Set button

for 3 seconds with a long beep to enter alarm current setting. è

Press the Switch/Set button to increase the alarm current by 0.5A

in each press. èHold the Switch/Set button for 3seconds with a

“beep” to save the setting.

 2Press the Switch/Set button and shows the maximum current.

èHold the Switch/Set button for 3seconds with a long beep to

adjust to a zero point.

 3Press the Switch/Set button to switch the display of each IP

address.

IPM-8220

Rear Panel :

45 6 7 8 9

Front Panel :

10 11 12 13

1516

System Indicating Light

Slow ashing: Normal operating

Rapid ashing: Normal updating

2Reset and Warning Indicating Light

3Temperature/Humidity Port for IPM-ESB Connection

IPM-4220/IPM-8220

Quick Installation Guide

IP-based 4-/8-port Switched

Power Manager

– 1 – – 2 –

– 3 – – 4 –

1. Package Contents

Thank you for choosing PLANET IP-based Switched Power Manager. The

Switched IPM provides the useful function of managing power for any

combination to connect with itself.

Open the box of the Switched IPM and carefully unpack it. The box

should contain the following items:

Switched IP Power Manager x 1 Quick Guide x 1

Power Cord x 1 Rack-mounting Kit (Only for IPM-8220) x 1

Note

If there is any item missing or damaged, please contact

the seller immediately.

2. Installation Precautions

Please set the maximum power-off protection allowed by power circuit

as per the rated current information indicated on the device with

reference to the local state rules, safety procedures and disconnector

deviation.

The unit can only be connected to a grounded power outlet or system.

Make sure the total current output of all the connected systems within

the rated current indicated on the device.

The test results of this device may be inaccurate giving unstable

power supply.

Avoid using this device in places near water or moisture environments.

Use the attachments/accessories specied by the manufacturer only.

Please avoid any items or liquids entering the device because their

contact with dangerous voltage points or short-circuit parts may cause

a re or electric shock.

3 Physical Introduction

IPM-4220

Rear Panel :

45 6 7 8 9

Front Panel :

10 11 12 13 14

System Indicating Light

Slow ashing: Normal operating

Rapid ashing: Normal updating

2Reset and Warning Indicating Light

3Temperature/Humidity Port for IPM-ESB Connection

4Reset Button

5RJ45 Ethernet Port

6USB Connected Port (Future Feature)

COM2/1

2 Com Ports provided to enable terminal control, API control and

2 mutual cascading

8Circuit Breaker Protection

9Power Inlet

10 Power On/Off Switch

11 Power Outlet

Note: The maximum output current is 16 amps.

12 LCD Panel

To display total current, voltage and IP

Switch/Set button

Provide LCD panel in order to switch the total current and IP; set

alarm current

IP Indicating Light

Lights remaining lit: IP displaying

Slow ashing: Max. current of alarm occurrence

Alarm Indicating Light

Lights remaining lit: Alarm has occurred

Slow ashing: There was current overloading

16 Buzzering

17 Power Outlet Indicating Light

Panel Operation

The rst mode of LCD is total current, switching with the Switch/Set

button to show the regular sequence of total current, max. current and

IP shown below:

0.0

192

168

010

001

Total Current

IP Display

IP Display Max. Current

IP Display IP Display

■ Alarm and IP indicating light

will not flash.

■ IP indicating light is flashing

because of overload.

■ IP indicating light remaining lit.

■ IP indicating light is flashing.

 1LCD menu shows the total current. èHold the Switch/Set button

for 3 seconds with a long beep to enter alarm current setting. è

Press the Switch/Set button to increase the alarm current by 0.5A

in each press. èHold the Switch/Set button for 3seconds with a

“beep” to save the setting.

 2Press the Switch/Set button and shows the maximum current.

èHold the Switch/Set button for 3seconds with a long beep to

adjust to a zero point.

 3Press the Switch/Set button to switch the display of each IP

address.

IPM-8220

Rear Panel :

45 6 7 8 9

Front Panel :

10 11 12 13

1516

System Indicating Light

Slow ashing: Normal operating

Rapid ashing: Normal updating

2Reset and Warning Indicating Light

3Temperature/Humidity Port for IPM-ESB Connection

IPM-4220/IPM-8220

Quick Installation Guide

IP-based 4-/8-port Switched

Power Manager

– 1 – – 2 –

– 3 – – 4 –

1. Package Contents

Thank you for choosing PLANET IP-based Switched Power Manager. The

Switched IPM provides the useful function of managing power for any

combination to connect with itself.

Open the box of the Switched IPM and carefully unpack it. The box

should contain the following items:

Switched IP Power Manager x 1 Quick Guide x 1

Power Cord x 1 Rack-mounting Kit (Only for IPM-8220) x 1

Note

If there is any item missing or damaged, please contact

the seller immediately.

2. Installation Precautions

Please set the maximum power-off protection allowed by power circuit

as per the rated current information indicated on the device with

reference to the local state rules, safety procedures and disconnector

deviation.

The unit can only be connected to a grounded power outlet or system.

Make sure the total current output of all the connected systems within

the rated current indicated on the device.

The test results of this device may be inaccurate giving unstable

power supply.

Avoid using this device in places near water or moisture environments.

Use the attachments/accessories specied by the manufacturer only.

Please avoid any items or liquids entering the device because their

contact with dangerous voltage points or short-circuit parts may cause

a re or electric shock.

3 Physical Introduction

IPM-4220

Rear Panel :

45 6 7 8 9

Front Panel :

10 11 12 13 14

System Indicating Light

Slow ashing: Normal operating

Rapid ashing: Normal updating

2Reset and Warning Indicating Light

3Temperature/Humidity Port for IPM-ESB Connection

4Reset Button

5RJ45 Ethernet Port

6USB Connected Port (Future Feature)

COM2/1

2 Com Ports provided to enable terminal control, API control and

2 mutual cascading

8Circuit Breaker Protection

9Power Inlet

10 Power On/Off Switch

11 Power Outlet

Note: The maximum output current is 16 amps.

12 LCD Panel

To display total current, voltage and IP

Switch/Set button

Provide LCD panel in order to switch the total current and IP; set

alarm current

IP Indicating Light

Lights remaining lit: IP displaying

Slow ashing: Max. current of alarm occurrence

Alarm Indicating Light

Lights remaining lit: Alarm has occurred

Slow ashing: There was current overloading

16 Buzzering

17 Power Outlet Indicating Light

Panel Operation

The rst mode of LCD is total current, switching with the Switch/Set

button to show the regular sequence of total current, max. current and

IP shown below:

0.0

192

168

010

001

Total Current

IP Display

IP Display Max. Current

IP Display IP Display

■ Alarm and IP indicating light

will not flash.

■ IP indicating light is flashing

because of overload.

■ IP indicating light remaining lit.

■ IP indicating light is flashing.

 1LCD menu shows the total current. èHold the Switch/Set button

for 3 seconds with a long beep to enter alarm current setting. è

Press the Switch/Set button to increase the alarm current by 0.5A

in each press. èHold the Switch/Set button for 3seconds with a

“beep” to save the setting.

 2Press the Switch/Set button and shows the maximum current.

èHold the Switch/Set button for 3seconds with a long beep to

adjust to a zero point.

 3Press the Switch/Set button to switch the display of each IP

address.

IPM-8220

Rear Panel :

45 6 7 8 9

Front Panel :

10 11 12 13

1516

System Indicating Light

Slow ashing: Normal operating

Rapid ashing: Normal updating

2Reset and Warning Indicating Light

3Temperature/Humidity Port for IPM-ESB Connection

IPM-4220/IPM-8220

Quick Installation Guide

IP-based 4-/8-port Switched

Power Manager

– 5 – –6 –

– 7 – – 8 –

 

3Press the Set button to show "maximal power outlet current

record", èHold the Set button for 3 seconds with a long beep to

adjust to a zero point.



4Hold the Switch button for 3 seconds with a long beep in Port

1~8 mode. èEnter Power On/Off mode ("L" will be added in

front of the original line number). èDouble-click the Set button to

switch between power on and off.

L01

IP Panel Operation

Press the Switch button to show words like "IP" èPress the Set

button to switch the display of each IP address. IP can only be set by

the web page rather than the LCD panel.

192 168 001 020IP

4. Utility Installation for Windows

PLANET “IP Search” is a software utility used to search the Switched

IPM product on a network quickly and with ease.

Step 1: Download the Power Packet Utility from PLANET download URL

http://www.planet.com.tw/en/support/download.php?type1=102

&model=48843&type=8184#list

Step 2: Please press the “Refresh” button to nd out your Switched

IPM.

Step 3: Enter the IP address and login to the homepage of Switched

IPM.

5. Further Information

The above steps introduce the simple installation of the Switched IPM.

For further details on the installation of the Switched IP Power Manager,

please refer to the user manual which you can be downloaded from the

PLANET website.

http://www.planet.com.tw/en/support/download.php?type1=102&model=

48843&type=3

If you have further questions, please contact the local dealer or

distributor where you purchased this product or you can contact PLANET

directly at the following email address: support@planet.com.tw

PLANET Technology Corp.

11F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan

2011-F10120-000

4Reset Button

5RJ45 Ethernet Port

6USB Connected Port (Future Feature)

COM2/1

2 Com Ports provided to enable terminal control, API control and

2 mutual cascading

8Circuit Breaker Protection

9Power Inlet

10 Power Outlet

Note: The maximum output current is 16 amps.

11 LCD Panel

To display total current, branch 1, branch 2, voltage and IP

Switch Button

Provide LCD panel in order to switch the total current, power

switch control and IP

Set Button

Provide LCD panel in order to switch the total current, branch

current, voltage, power switch current, power switch control and

IP; set alarm current

14 Buzzer

Alarm Indicating Light

Lights remaining lit: Alarm has occurred

Slow ashing: There was current overloading

16 Power Outlet Indicating Light

Current Panel Operation

When the LCD panel only displays gures and the sign of "A (AMP)", it

means total current. Switch with the Set button to show the following

sequence:

Total Current

Branch 2

Max. Current

Branch 1 Current

Branch 1 Max. Current

Branch 2 Current

Voltage

0.0A

112V

0.0A

0.0A0.0A

0.0A

 

1LCD menu shows total current, and current values of branch 1 and

branch 2. èHold the Set button for 3 seconds with a long beep

to enter alarm current setting. èEnter ash mode (LCD will ash

after entering setting mode, "S" and "W" will display at the bottom

of LCD). èPress the Set button to increase the alarm current by

0.5A in each press. èHold the Set button for 3 seconds with a

"beep" to save the setting.

 

2Press the Set button to show the voltage information.

 

3Press the Set button to show the maximum current record of all

branch/branch 1/branch 2. èHold the Set button for 3 seconds

with a long beep to adjust to a zero point.

Power Outlet Panel Operation

When the LCD panel shows gures and "0", the information shown

is the branch circuit power outlet. By clicking the Set button, the

following information will be displayed in sequence:

01 0.0A

Port 1 Port 1 Current Port 1 Max. Current

0.0A

1 4



1Press the Switch button to Port 1~8 mode.

 2Press the Set button to show power outlet current. èHold the

Set button for 3 seconds with a long beep to enter power outlet

alarm current setting. èEnter ash mode (LCD will ash after

entering setting mode, "S", "O" and "W" will display at the bottom

of LCD). èPress the Set button to increase the alarm current by

0.5A in each press. èHold the Set button for 3 seconds with a

"beep" to save the setting.

– 5 – –6 –

– 7 – – 8 –

 

3Press the Set button to show "maximal power outlet current

record", èHold the Set button for 3 seconds with a long beep to

adjust to a zero point.



4Hold the Switch button for 3 seconds with a long beep in Port

1~8 mode. èEnter Power On/Off mode ("L" will be added in

front of the original line number). èDouble-click the Set button to

switch between power on and off.

L01

IP Panel Operation

Press the Switch button to show words like "IP" èPress the Set

button to switch the display of each IP address. IP can only be set by

the web page rather than the LCD panel.

192 168 001 020IP

4. Utility Installation for Windows

PLANET “IP Search” is a software utility used to search the Switched

IPM product on a network quickly and with ease.

Step 1: Download the Power Packet Utility from PLANET download URL

http://www.planet.com.tw/en/support/download.php?type1=102

&model=48843&type=8184#list

Step 2: Please press the “Refresh” button to nd out your Switched

IPM.

Step 3: Enter the IP address and login to the homepage of Switched

IPM.

5. Further Information

The above steps introduce the simple installation of the Switched IPM.

For further details on the installation of the Switched IP Power Manager,

please refer to the user manual which you can be downloaded from the

PLANET website.

http://www.planet.com.tw/en/support/download.php?type1=102&model=

48843&type=3

If you have further questions, please contact the local dealer or

distributor where you purchased this product or you can contact PLANET

directly at the following email address: support@planet.com.tw

PLANET Technology Corp.

11F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan

2011-F10120-000

4Reset Button

5RJ45 Ethernet Port

6USB Connected Port (Future Feature)

COM2/1

2 Com Ports provided to enable terminal control, API control and

2 mutual cascading

8Circuit Breaker Protection

9Power Inlet

10 Power Outlet

Note: The maximum output current is 16 amps.

11 LCD Panel

To display total current, branch 1, branch 2, voltage and IP

Switch Button

Provide LCD panel in order to switch the total current, power

switch control and IP

Set Button

Provide LCD panel in order to switch the total current, branch

current, voltage, power switch current, power switch control and

IP; set alarm current

14 Buzzer

Alarm Indicating Light

Lights remaining lit: Alarm has occurred

Slow ashing: There was current overloading

16 Power Outlet Indicating Light

Current Panel Operation

When the LCD panel only displays gures and the sign of "A (AMP)", it

means total current. Switch with the Set button to show the following

sequence:

Total Current

Branch 2

Max. Current

Branch 1 Current

Branch 1 Max. Current

Branch 2 Current

Voltage

0.0A

112V

0.0A

0.0A0.0A

0.0A

 

1LCD menu shows total current, and current values of branch 1 and

branch 2. èHold the Set button for 3 seconds with a long beep

to enter alarm current setting. èEnter ash mode (LCD will ash

after entering setting mode, "S" and "W" will display at the bottom

of LCD). èPress the Set button to increase the alarm current by

0.5A in each press. èHold the Set button for 3 seconds with a

"beep" to save the setting.

 

2Press the Set button to show the voltage information.

 

3Press the Set button to show the maximum current record of all

branch/branch 1/branch 2. èHold the Set button for 3 seconds

with a long beep to adjust to a zero point.

Power Outlet Panel Operation

When the LCD panel shows gures and "0", the information shown

is the branch circuit power outlet. By clicking the Set button, the

following information will be displayed in sequence:

01 0.0A

Port 1 Port 1 Current Port 1 Max. Current

0.0A

1 4



1Press the Switch button to Port 1~8 mode.

 2Press the Set button to show power outlet current. èHold the

Set button for 3 seconds with a long beep to enter power outlet

alarm current setting. èEnter ash mode (LCD will ash after

entering setting mode, "S", "O" and "W" will display at the bottom

of LCD). èPress the Set button to increase the alarm current by

0.5A in each press. èHold the Set button for 3 seconds with a

"beep" to save the setting.

– 5 – –6 –

– 7 – – 8 –

 

3Press the Set button to show "maximal power outlet current

record", èHold the Set button for 3 seconds with a long beep to

adjust to a zero point.



4Hold the Switch button for 3 seconds with a long beep in Port

1~8 mode. èEnter Power On/Off mode ("L" will be added in

front of the original line number). èDouble-click the Set button to

switch between power on and off.

L01

IP Panel Operation

Press the Switch button to show words like "IP" èPress the Set

button to switch the display of each IP address. IP can only be set by

the web page rather than the LCD panel.

192 168 001 020IP

4. Utility Installation for Windows

PLANET “IP Search” is a software utility used to search the Switched

IPM product on a network quickly and with ease.

Step 1: Download the Power Packet Utility from PLANET download URL

http://www.planet.com.tw/en/support/download.php?type1=102

&model=48843&type=8184#list

Step 2: Please press the “Refresh” button to nd out your Switched

IPM.

Step 3: Enter the IP address and login to the homepage of Switched

IPM.

5. Further Information

The above steps introduce the simple installation of the Switched IPM.

For further details on the installation of the Switched IP Power Manager,

please refer to the user manual which you can be downloaded from the

PLANET website.

http://www.planet.com.tw/en/support/download.php?type1=102&model=

48843&type=3

If you have further questions, please contact the local dealer or

distributor where you purchased this product or you can contact PLANET

directly at the following email address: support@planet.com.tw

PLANET Technology Corp.

11F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan

2011-F10120-000

4Reset Button

5RJ45 Ethernet Port

6USB Connected Port (Future Feature)

COM2/1

2 Com Ports provided to enable terminal control, API control and

2 mutual cascading

8Circuit Breaker Protection

9Power Inlet

10 Power Outlet

Note: The maximum output current is 16 amps.

11 LCD Panel

To display total current, branch 1, branch 2, voltage and IP

Switch Button

Provide LCD panel in order to switch the total current, power

switch control and IP

Set Button

Provide LCD panel in order to switch the total current, branch

current, voltage, power switch current, power switch control and

IP; set alarm current

14 Buzzer

Alarm Indicating Light

Lights remaining lit: Alarm has occurred

Slow ashing: There was current overloading

16 Power Outlet Indicating Light

Current Panel Operation

When the LCD panel only displays gures and the sign of "A (AMP)", it

means total current. Switch with the Set button to show the following

sequence:

Total Current

Branch 2

Max. Current

Branch 1 Current

Branch 1 Max. Current

Branch 2 Current

Voltage

0.0A

112V

0.0A

0.0A0.0A

0.0A

 

1LCD menu shows total current, and current values of branch 1 and

branch 2. èHold the Set button for 3 seconds with a long beep

to enter alarm current setting. èEnter ash mode (LCD will ash

after entering setting mode, "S" and "W" will display at the bottom

of LCD). èPress the Set button to increase the alarm current by

0.5A in each press. èHold the Set button for 3 seconds with a

"beep" to save the setting.

 

2Press the Set button to show the voltage information.

 

3Press the Set button to show the maximum current record of all

branch/branch 1/branch 2. èHold the Set button for 3 seconds

with a long beep to adjust to a zero point.

Power Outlet Panel Operation

When the LCD panel shows gures and "0", the information shown

is the branch circuit power outlet. By clicking the Set button, the

following information will be displayed in sequence:

01 0.0A

Port 1 Port 1 Current Port 1 Max. Current

0.0A

1 4



1Press the Switch button to Port 1~8 mode.

 2Press the Set button to show power outlet current. èHold the

Set button for 3 seconds with a long beep to enter power outlet

alarm current setting. èEnter ash mode (LCD will ash after

entering setting mode, "S", "O" and "W" will display at the bottom

of LCD). èPress the Set button to increase the alarm current by

0.5A in each press. èHold the Set button for 3 seconds with a

"beep" to save the setting.

– 5 – –6 –

– 7 – – 8 –

 

3Press the Set button to show "maximal power outlet current

record", èHold the Set button for 3 seconds with a long beep to

adjust to a zero point.



4Hold the Switch button for 3 seconds with a long beep in Port

1~8 mode. èEnter Power On/Off mode ("L" will be added in

front of the original line number). èDouble-click the Set button to

switch between power on and off.

L01

IP Panel Operation

Press the Switch button to show words like "IP" èPress the Set

button to switch the display of each IP address. IP can only be set by

the web page rather than the LCD panel.

192 168 001 020IP

4. Utility Installation for Windows

PLANET “IP Search” is a software utility used to search the Switched

IPM product on a network quickly and with ease.

Step 1: Download the Power Packet Utility from PLANET download URL

http://www.planet.com.tw/en/support/download.php?type1=102

&model=48843&type=8184#list

Step 2: Please press the “Refresh” button to nd out your Switched

IPM.

Step 3: Enter the IP address and login to the homepage of Switched

IPM.

5. Further Information

The above steps introduce the simple installation of the Switched IPM.

For further details on the installation of the Switched IP Power Manager,

please refer to the user manual which you can be downloaded from the

PLANET website.

http://www.planet.com.tw/en/support/download.php?type1=102&model=

48843&type=3

If you have further questions, please contact the local dealer or

distributor where you purchased this product or you can contact PLANET

directly at the following email address: [email protected]

PLANET Technology Corp.

11F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan

2011-F10120-000

4Reset Button

5RJ45 Ethernet Port

6USB Connected Port (Future Feature)

COM2/1

2 Com Ports provided to enable terminal control, API control and

2 mutual cascading

8Circuit Breaker Protection

9Power Inlet

10 Power Outlet

Note: The maximum output current is 16 amps.

11 LCD Panel

To display total current, branch 1, branch 2, voltage and IP

Switch Button

Provide LCD panel in order to switch the total current, power

switch control and IP

Set Button

Provide LCD panel in order to switch the total current, branch

current, voltage, power switch current, power switch control and

IP; set alarm current

14 Buzzer

Alarm Indicating Light

Lights remaining lit: Alarm has occurred

Slow ashing: There was current overloading

16 Power Outlet Indicating Light

Current Panel Operation

When the LCD panel only displays gures and the sign of "A (AMP)", it

means total current. Switch with the Set button to show the following

sequence:

Total Current

Branch 2

Max. Current

Branch 1 Current

Branch 1 Max. Current

Branch 2 Current

Voltage

0.0A

112V

0.0A

0.0A0.0A

0.0A

 

1LCD menu shows total current, and current values of branch 1 and

branch 2. èHold the Set button for 3 seconds with a long beep

to enter alarm current setting. èEnter ash mode (LCD will ash

after entering setting mode, "S" and "W" will display at the bottom

of LCD). èPress the Set button to increase the alarm current by

0.5A in each press. èHold the Set button for 3 seconds with a

"beep" to save the setting.

 

2Press the Set button to show the voltage information.

 

3Press the Set button to show the maximum current record of all

branch/branch 1/branch 2. èHold the Set button for 3 seconds

with a long beep to adjust to a zero point.

Power Outlet Panel Operation

When the LCD panel shows gures and "0", the information shown

is the branch circuit power outlet. By clicking the Set button, the

following information will be displayed in sequence:

01 0.0A

Port 1 Port 1 Current Port 1 Max. Current

0.0A

1 4



1Press the Switch button to Port 1~8 mode.

 2Press the Set button to show power outlet current. èHold the

Set button for 3 seconds with a long beep to enter power outlet

alarm current setting. èEnter ash mode (LCD will ash after

entering setting mode, "S", "O" and "W" will display at the bottom

of LCD). èPress the Set button to increase the alarm current by

0.5A in each press. èHold the Set button for 3 seconds with a

"beep" to save the setting.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Planet Networking & Communication Changer