Planar PLL2210MW Manuel utilisateur

www.planar.com

USER'S GUIDE

LED Monitor

PLL2210MW

Content

Operation Instructions...................................................................................................................................................1

Safety Precautions...........................................................................................................................................................2

First Setup...........................................................................................................................................................................3

Front View of the Product ............................................................................................................................................4

Rear View of the Product ..............................................................................................................................................5

Quick Installation .............................................................................................................................................................6

Basic Operation.................................................................................................................................................................7

Advanced Operation—OSD Menu............................................................................................................................9

Supporting Timing Modes ........................................................................................................................................ 12

Technical Information................................................................................................................................................. 13

Wall-mount instruction .............................................................................................................................................. 14

Care and Maintenance................................................................................................................................................ 15

Troubleshooting............................................................................................................................................................ 15

Product Registration and Technical Support..................................................................................................... 16

Operation Instructions

Thank you for purchasing this LED Monitor, a high-resolution multi-scan color LED Monitor.

Please read this guide thoroughly before installation.

FCC RADIO FREQUENCY INTERFERENCE STATEMENT

WARNING: (FOR FCC CERTIFIED MODELS)

This LED Monitor has been tested and found compliant with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection

against harmful interference to a residential installation. This LED Monitor generates, uses, and

can radiate radio frequency energy. Harmful interference to radio communication may be led as

a result if it‘s not properly installed and used. However, there is no guarantee that interference

will not occur in a particular installation. If this LED Monitor does cause serious interference to

radio or television reception, resetting the LED Monitor may determine it. Moreover, users are

encouraged to correct interference by doing one or more of the following:

 Reorient or relocate the receiving antenna.

 Move the LED Monitor and the receiver further away from each other.

 Connect the LED Monitor into an outlet on a circuit different from that to which the

receiver is connected.

 Consult your local dealer or an qualified technician.

FCC Warning:

To assure a continued FCC compliance, a user must use a grounded power supply cord and the

provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized

changes or modifications to this LED Monitor would void the user‘s authority to operate this

device.

Note: If necessary, shielded interface cables and AC power cord must be used to meet the

emission level limits.

According to WEEE regulation, this LED Monitor can't be handled as normal trash in Europe when

it is out of usage. Please refer to the recycle information from our website to handle it.

Safety Precautions

This LED Monitor is manufactured and tested on a ground principle that a user’s safety comes

first. However, improper use or installation may result danger to the LED Monitor as well as to the

user. Carefully go over the following WARNINGS before installation and keep this guide handy.

WARNINGS:

 This LED Monitor should be operated only at the correct power sources indicated on the

label on the rear end of the LED Monitor. If you’re unsure of the power supply in your

residence, consult your local dealer or power company.

 Do not try to repair the LED Monitor yourself as it contains no user-serviceable parts. The

LED Monitor should only be repaired by a qualified technician.

 Do not remove the LED Monitor cabinet. There is high-voltage parts inside that may cause

electric shock to human bodies, even when the power cord is disconnected .

 Stop using the LED Monitor if the cabinet is damaged. Have it checked by a service

technician.

 Put your LED Monitor only in a clean, dry environment. Unplug the LED Monitor

immediately if gets wet and consult your service technician.

 Always unplug the LED Monitor before cleaning it. Clean the cabinet with a clean, dry cloth.

Apply non-ammonia based cleaner onto the cloth, not directly onto the glass screen.

 Keep the LED Monitor away from magnetic objects, motors, TV sets, and transformer.

 Do not place heavy objects on the cable or power cord.



For pluggable equipment, the socket-outlet shall be installed near the equipment and shall

be easily accessible.



Due to safety concerns, if the VESA mounting kit is purchased separately please make sure

the mounting kit is UL-Listed, and replaceable only by service personnel.

First Setup

Congratulations on your purchase of this high performance LED monitor.

This LED Monitor comes with the following accessories :

• LED Monitor • Audio Cable

• Power Cable • User's Guide

• VGA Cable (15 pin) • Base

• AC/DC Power Adapter (AC 100~240V Input /

DC 12V Output)

• DVI Cable (24 pin)

Install the stand base

1. Lay the LED Monitor flat on a table with the LED screen face down. To prevent the monitor

from being scratched, put a piece of soft cloth on the table on which the screen will be set.

2. Unpack the base, one hand hold the monitor, the other hand attach the base to the stand.

3. Stand the LED Monitor up.

Disconnecting the stand base

1. Lay the LED Monitor flat on a table with the LED screen face down. To prevent the LED Monitor

from being scratched, put a piece of soft cloth on the table on which the screen will be set.

2. Hold the monitor down with one hand. With the other hand, use two fingers to press the

hooks down as directed below.

3. Remove the base from the stand.

Front View of the Product

①②③④⑤

①OSD Turn On/ Off

②Volume Adjust/ Scroll Down/ Adjust Decrease

③Preset Mode/ Scroll UP/ Adjust Increase

④Input select/ Confirm Selection

⑤Power On/Off / LED Indicator

Rear View of the Product

⑥⑦⑧⑨

⑥Power input (+12V DC in)

⑦Audio Input

⑧DVI Input (DVI 24 pin)

⑨VGA Input (D-Sub 15 pin)

Quick Installation

1. Connect either VGA or DVI Video Source from the monitor to the computer. Make sure both

monitor and computer are powered OFF.

2. Connect the audio cable from audio output of computer to the audio input of the monitor.

3. Connect the AC power cord to the AC/DC power adapter, then to the monitor.

4. Power-ON computer and then POWER-ON the monitor.

5. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x

1080 @ 60Hz.

Example:

Audio cable

AC Power cord

VGA cable

AC/DC Power adapter DVI cable

Basic Operation

Before using the LED Monitor:

Connect external equipments properly.

Insert the power plug, and the power LED indicator will light orange.

Power On/Off

To turn the LED Monitor on/off:

Press POWER button on the front of LED Monitor. The power LED indicator lights green when

the LED Monitor is on.

Using the OSD Menu

You are able to use OSD menus to adjust various settings by using menu button on the front of

the LED Monitor.

The basic operation is as following:

Displays main menu

1 Exits from OSD menu

2 Selects between VGA, DVI or Auto mode

Select the desired item when in OSD menu

▼

When not in OSD menu, directly enters Volume adjust

Select the desired item when in OSD menu

▲

When not in OSD menu, directly enters Preset Mode

▼+ ▲Recalls both Contrast and Brightness (when not in OSD menu)

OSD Lock Out Function

When LED Monitor is in normal display, you can enable the “OSD Lock Out” function.

Option 1: OSD lock – all 4 buttons are locked except the“POWER” button.

Press and hold the 1button and the ▲button for 3 seconds to lock the OSD buttons.

The LED Monitor will show an “OSD Lock Out” message for 5~10 seconds and the message will

disappear automatically.

Repeat this step to unlock.

Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.

Press and hold the 1button and the ▼button for 3 seconds to lock all 5 buttons.

The LED Monitor will show an “Lock Out” message for 5~10 seconds and the message will

disappear automatically.

Repeat this step to unlock.

Autres manuels pour PLL2210MW

Table des matières

Autres manuels Planar Moniteur

Planar

Planar PL1711M-WH Manuel utilisateur

Planar

Planar PT1510MX Manuel utilisateur

Planar

Planar Dome EX Manuel utilisateur

Planar

Planar Leyard Simplicity Series Manuel utilisateur

Planar

Planar Clarity Bobcat X Manuel utilisateur

Planar

Planar PJ19W Manuel utilisateur

Planar

Planar VitalScreen S VSS17SX Manuel utilisateur

Planar

Planar PT1911MX Manuel utilisateur

Planar

Planar VitalScreen S VSS17SX Manuel utilisateur

Planar

Planar CT1905S Manuel utilisateur

Planar

Planar PD520 Manuel d'utilisation

Planar

Planar Helium PCT2235 Manuel utilisateur

Planar

Planar LA1710R Manuel utilisateur

Planar

Planar UltraRes URP98 Manuel utilisateur

Planar

Planar PXN2490MW Manuel utilisateur

Planar

Planar PT1785P Manuel utilisateur

Planar

Planar Clarity MX46HD Manuel utilisateur

Planar

Planar Helium PCT2785 Manuel utilisateur

Planar

Planar PE191M Manuel utilisateur

Planar

Planar PT1710MX Manuel utilisateur

Planar

Planar FWT1503Z Manuel utilisateur

Planar

Planar PT1700M Manuel utilisateur

Planar

Planar LookThru Manuel utilisateur

Planar

Planar LO552 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation