Planar Planar GX2MP Manuel utilisateur

GX2MP Display

User’s Guide

Information in this document has been carefully checked for accuracy; however,

no guarantee is given to the correctness of the contents. This document is subject to

change without notice. Planar provides this information as reference only. Reference

to other vendors’ product does not imply any recommendation or endorsement.

This document contains proprietary information protected by copyright. No part of

this manual may be reproduced by any mechanical, electronic, or other means, in

any form, without prior written permission of the manufacturer.

Planar, the Planar logo, Dome, Dome CXtra, and DICal are either registered

trademark or trademarks of Planar Systems, Inc. All other trademarks are

the property of their respective owners.

020-0588-00A

iii

Contents

Product Information iv

About the Display 1

Installing the Display 6

Using Display Controls 11

Appendix 18

Index 25

Regulatory Compliance 26

Standard Warranty 28

iv | GX2MP Display

Product Information

The design of the GX2MP display takes into account every known

measure to ensure your personal safety. Improper use of the display

can result in electric shock, fire, or damage to components. Read all

instructions before setting up the display, and observe the safety

precautions listed.

Intended use

The GX2MP display is intended as a general-purpose display for

use in clinical environments where DICOM conformance is desired.

It is appropriate for use as a non-diagnostic device.

Important recycle instruction

HAZARDOUS SUBSTANCE. Lamp(s) inside this product

contain mercury. This product may contain other

electronic waste that can be hazardous if not disposed of

properly. Recycle or dispose in accordance with local,

state, or federal laws. For more information, contact the

Electronic Industries Alliance at WWW.EIAE.ORG. For lamp-

specific disposal information, check WWW.LAMPRECYCLE.ORG.

RECYCLING. Do not use household or municipal waste

collection services for disposal of electrical and electronic

equipment. EU countries require the use of separate

recycling collection services.

ENVIRONMENT-FRIENDLY USE PERIOD. The number

encircled by the recycling symbol indicates the safe-use

period (in years) of the product. China requires the use of

recycling services at the end of product life for electronic

devices containing toxic or hazardous substances.

Product Information | v

Symbol explanations

CAUTION. Read the accompanying text carefully, for

proper operation and maintenance of the display

system.

DANGEROUS VOLTAGE. Important precautions about

electric shock. Read the accompanying text carefully, to

prevent damage to components of the display system

and for your safety.

DIRECT CURRENT.

BAROMETRIC PRESSURE. Transport and storage

12,000 meters (39,400 feet), maximum in unpressurized

container.

RELATIVE HUMIDITY. Transport and storage 5% to 90%

(noncondensing).

TEMPERATURE. Transport and storage -10° to 60° C.

vi | GX2MP Display

Safety precautions

• Use only the power cord shipped with the unit. If the power cable is faulty

in any way, speak with your account representative for resolution.

• The power supply cord serves as the primary disconnection device. Make

sure a grounded AC outlet is within easy reach of the installation location.

• Operate the display only from a power source indicated by the display

specifications.

• Never open the display case, even when the power is off. Dangerous high

voltage inside may cause electric shock or death.

• To avoid damage to the display, use the grounded power supply and video

cable supplied by Planar, or use certified replacements.

• Be sure the display is electrically grounded. You must connect the third

grounding pin on the US power cord to a grounded outlet. The European

power cord does not have a third grounding pin, but it must be plugged

into a grounded outlet.

• Avoid using overloaded AC outlets, extension cords, frayed power cords, or

broken plugs.

• If you cannot insert the plug into the outlet you plan to use, have a licensed

electrician replace the outlet with a properly grounded outlet. If the power

cord connects directly into the computer, make sure the computer is

grounded.

• Call or e-mail Planar technical support when the display is not operating

properly.

• Keep the display dry in all instances. The display lacks protection against

liquids or spills.

•In locations where 240V outlets are used, connect the display to

a center-tapped, 240V, single-phase supply only (for Canada and

the United States).

Product Information | vii

Unpacking and handling tips

The GX2MP display requires proper care to maintain product operation and

adherence to specification. Unpack the display and components carefully,

then set up and handle the unit properly to avoid damage to the LCD panel.

• Use both hands to grasp the display case when lifting it from the shipping

carton, but avoid touching the screen.

• Do not apply pressure to the screen or touch the screen with bare fingers

or objects. Pressure can affect image quality. Cosmetics and oils on the skin

are both detrimental to the screen and difficult to remove.

• Allow the display to warm up to room temperature before turning it on.

Avoid sudden temperature changes in the environment, as this may cause

condensation, which damages the display.

• Secure the display properly onto a standard VESA 100-mm mounting unit

if you elect not to use the desk stand.

• Do not place the display on a sloping shelf unless it is properly secured.

• Do not set up the display near strong light or heat sources.

• Do not block the vents on the back of the display or install the display in

a built-in enclosure. Blocked vents cause excessive heat to build up inside

the display, increasing risk of fire.

• When installing components, turn off your computer, but leave it plugged

into a grounded outlet.

• Do not remove the back cover or disassemble the display. There are

no user-serviceable parts inside.

viii | GX2MP Display

Preventing fire and injury

• Replace the power supply cord or video cables if damaged.

• Use only the power source indicated in this guide or listed on the display.

• Do not plug the power supply into an overloaded AC outlet or extension

cord. Overloaded AC outlets and cords can result in electric shock or fire.

• Do not drop or push objects into the display case. Internal components

contain high voltage.

• Unplug the power cord from the wall outlet during thunderstorms.

• Do not place magnetic devices, such as motors, near the display.

• Always turn off the display when it will not be in use for more than

a short period of time.

• Do not add accessories that have not been designed for use with

this display.

Cleaning the display

• Unplug the power supply before cleaning the display or LCD screen.

• Use a slightly damp (not wet) clean, lint-free cloth to clean the display.

• Dampen a clean cloth with a small amount of isopropyl alcohol to remove

glue or dust if the screen is still not clean. Do not saturate the cloth;

otherwise, the liquid may seep into the display case and collect in the

enclosure. Use a clean, dry cloth to completely remove wet residue.

• Do not use chemically treated dust cloths, acetone, toluene, or harsh

solvents on the display case or the screen.

• Do not expose the display to water or excessive moisture. Do not allow

water or other stains to stand on the unit. Wipe liquids off immediately to

prevent damage to the display case and the screen.

• Do not use aerosol directly on the display screen. Overspraying may cause

electric shock.

WARNING

DISCONNECT SUPPLY BEFORE SERVICING

AVERTISSEMENT

COUPER L’ALIMENTATION AVANT L’ENTRETIEN ET LE DEPANNAGE

Product Information | ix

Shipping/storing the display

Keep the display in its shipping container until installation. Return the display

to its original container whenever you need to store the unit, move it to

another location, or return it for repair. The packaging supplied by the

manufacturer protects the display while it is in transit. See environment

specifications for more information.

Before returning the display to the container, do the following:

1 Swivel the display panel to landscape mode.

2 Push the panel down to the lowest position.

3 Use the stand lock to anchor the panel.

Disposal information

Follow your local governing ordinance and recycling policy for

proper disposal or recycling of display components.

Also included: D-sub cable

GX2MP display mounted on desk stand

Display controller DVI cable Power cord

Quick reference

Display driver and

calibration software

Autres manuels pour Planar GX2MP

Table des matières

Autres manuels Planar Moniteur

Planar

Planar PT1501M Manuel utilisateur

Planar

Planar PLL2210MW Manuel utilisateur

Planar

Planar PLL2770W Manuel utilisateur

Planar

Planar UltraRes L Series Manuel utilisateur

Planar

Planar PXL2780MW Manuel utilisateur

Planar

Planar PDP42HD Manuel utilisateur

Planar

Planar PX2710MW Manuel utilisateur

Planar

Planar PLL2450MW Manuel utilisateur

Planar

Planar Dome E4c Manuel utilisateur

Planar

Planar RA-Series Manuel utilisateur

Planar

Planar PLL2010MW Manuel utilisateur

Planar

Planar PQ1710M Manuel utilisateur

Planar

Planar PQ1710M Manuel utilisateur

Planar

Planar PT170 Manuel utilisateur

Planar

Planar PXL2251MW Manuel utilisateur

Planar

Planar PX2611W Manuel utilisateur

Planar

Planar PL2011 Manuel utilisateur

Planar

Planar PS5562 Manuel utilisateur

Planar

Planar Dome C2 Manuel utilisateur

Planar

Planar PT3285PW Manuel utilisateur

Planar

Planar UltraRes URP49 Manuel utilisateur

Planar

Planar Dome C3i Manuel utilisateur

Planar

Planar EP6514K Manuel utilisateur

Planar

Planar PL1911M Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation