Planar Dome E4c Manuel utilisateur

Dome E4c Display

User’s Guide

MX4 Display Controller

mx4.book Page i Wednesday, August 9, 2006 3:03 PM

Information in this document has been carefully checked for accuracy; however, no

guarantee is given to the correctness of the contents. This document is subject to

change without notice. Planar provides this information as reference only. Reference

to other vendors’ product does not imply any recommendation or endorsement.

This document contains proprietary information protected by copyright. No part of

this manual may be reproduced by any mechanical, electronic, or other means, in

any form, without prior written permission of the manufacturer.

Planar, Dome, Dome E4c, Dome CXtra, RightLight are either registered trademark or

trademarks of Planar Systems, Inc. All other trademarks are the property of their

respective owners.

020-0497-00A

mx4.book Page ii Wednesday, August 9, 2006 3:03 PM

Product Information

The design of the Dome E4c digital display takes into account every

known measure to ensure your personal safety. Improper use of the

display can result in electric shock, fire, or damage to the display.

Read all instructions before setting up the display.

Classification:

Shock Protection: Class I.

Degree of Protection Against Electric Shock: No applied part.

Degree of Protection Against Harmful Ingress of Water:

Ordinary equipment (IPX0).

Degree of Safety in the Presence of Flammable Anaesthetic

Mixture with Air or with Oxygen or Nitrous Oxide:

Not suitable for use in the presence of a flammable

anaesthetic mixture with air or with oxygen or nitrous oxide.

Mode of Operation: Continuous.

Important recycle instruction:

LCD lamp(s) inside this product contain mercury. This

product may contain other electronic waste that can be

hazardous if not disposed of properly. Recycle or dispose

in accordance with local, state, or federal laws. For more

information, contact the Electronic Industries Alliance at

WWW.EIAE.ORG. For lamp-specific disposal information, check

WWW.LAMPRECYCLE.ORG.

Disposal information:

Follow your local governing ordinance for proper disposal

or recycling of electronic components.

mx4.book Page iii Wednesday, August 9, 2006 3:03 PM

iv | Dome E4c Display

Symbol explanations

DISPOSAL. Do not use household or municipal waste

collection services for disposal of electrical and

electronic equipment. EU countries require the

use of separate recycling collection services.

WARNING/CAUTION. Read the accompanying text

carefully, for proper operation and maintenance of

the display system.

DANGEROUS VOLTAGE. Important precautions about

electric shock. Read the accompanying text carefully,

to prevent damage to components of the display

system and for your safety.

DIRECT CURRENT.

BAROMETRIC PRESSURE. Maximum operating altitude, up

to 3,048 meters (10,000 feet). Maximum unpressurized

shipping and storage altitude, up to 12,192 meters

(40,000 feet).

RELATIVE HUMIDITY. Operating 10% to 90% (non-

condensing). Transport and storage 5% to 90%

(non-condensing).

TEMPERATURE. Operating 0° to 40° C. (Ambient air

temperature surrounding the display.) Transport and

storage -10° to 60° C. NOTE: After shipping or storage,

allow display unit to reach room temperature before

powering on. Ambient room temperature ranges from

20° to 25° C (68° to 77° F).

mx4.book Page iv Wednesday, August 9, 2006 3:03 PM

Product Information | v

Intended use

The Dome E4c display is an AMLCD unit designed for viewing medical

X-ray images. This unit should not be used near patients and should

be kept outside of 1.83 m perimeter and 2.29 m vertical.

This device must not be used in primary image diagnosis in

mammography.

CAUTION: Federal law restricts this device to sale by or on the order of

a medical practitioner.

Safety precautions

External equipment intended for connection to signal input, signal

output, or other connectors must comply with the relevant IEC

standard (EN/IEC 60601-1 series for medical electrical equipment).

All such combinations (systems) must comply with the standard IEC

60601-1-1, Safety requirements for medical electrical systems.

Equipment not complying to IEC 60601 must be kept outside the

patient environment, as defined in the standard as at least 1.5 meters

from the patient or the patient support.

Any person who connects external equipment to signal input, signal

output, or other connectors has formed a system and is therefore

responsible for the system to comply with the requirements of IEC

60601-1-1. If in doubt, speak with a qualified technician.

GROUNDING RELIABILITY CAN ONLY BE ACHIEVED WHEN

EQUIPMENT IS CONNECTED TO AN EQUIVALENT RECEPTABLE

MARKED “HOSPITAL ONLY” OR “HOSPITAL GRADE.”

mx4.book Page v Wednesday, August 9, 2006 3:03 PM

vi | Dome E4c Display

Shipping/storing the display

Keep the display in its shipping container until installation. Return the

display to its original container whenever you need to store the unit,

move it to another location, or return it for repair.

Safety tips

• Use caution when adjusting the position of the display. Improper

handling of the unit may result in hand injury. Always grasp the

sides of the display to adjust the viewing angle, height, or tilt.

• Never place your hands between the display and the stand base

when lowering the display height.

• Never open the display case, even when the power is off. Do not

drop or push objects into the display case. Dangerous voltage

inside may cause electric shock or death.

• Use the grounded power supply and the video cable supplied by

Planar. Replace the power supply or video cable if damaged.

• Be sure the display is electrically grounded. Connect the third

grounding pin on the US power cord to a grounded outlet. The

European power cord lacks a third grounding pin, but it must be

plugged into a grounded outlet. If the power cord connects

directly into the computer, make sure the computer is grounded.

• Keep the display dry if it is part of a surgical system. The display

lacks protection against liquids or spills.

• Do not plug the power supply into an overloaded AC outlet or

extension cord. Overloaded AC outlets and cords can result in

electric shock or fire.

• Unplug the power cord from the wall outlet during

thunderstorms.

• Do not place magnetic devices, such as motors, near the display.

•In locations where 240V outlets are used, connect the

Dome E4c display to a center-tapped, 240V, single-phase

supply only (for Canada and the United States only).

mx4.book Page vi Wednesday, August 9, 2006 3:03 PM

Product Information | vii

Unpacking and handling tips

The Dome E4c display is a precision instrument that requires proper

care to maintain adherence to specification. Unpack the display

carefully, then follow instructions to avoid damage to the LCD panel.

• Use both hands to grasp the display case when lifting it from

the shipping carton, but avoid touching the screen.

• Do not apply pressure to the screen or touch the screen with

bare fingers or objects. Pressure can affect image quality.

• Allow the display to warm to room temperature before turning it

on. Avoid sudden temperature changes to prevent condensation.

• Secure the display onto the Planar-supplied wall or cart mounting

hardware to ensure safety if you elect not to use the desk stand.

• Do not set up the display near strong light or heat sources.

• Do not block the vents on the display or install the display in a built-

in enclosure. Blocked vents cause excessive heat inside the display.

• Do not remove the back cover or disassemble the display.

There are no user-serviceable parts inside.

Cleaning the display unit

Periodically wipe the display housing with a soft, dry cloth to prevent

dust and other material from clogging the venting holes.

The display screen can be damaged by excessive scrubbing and by

incompatible cleaning solvents. Dampen a clean, soft lint-free cloth

with distilled de-ionized water and wipe the screen gently. Use a

clean, soft, dry lint-free cloth to remove any residue.

To remove grease or other organic contaminants from the screen,

use a 50% to 70% IPA (isopropyl alcohol) solution sparingly. Never

use acetone, as it can damage the antistatic hard coating.

WARNING

DISCONNECT SUPPLY BEFORE SERVICING

AVERTISSEMENT

COUPER L’ALIMENTATION AVANT L’ENTRETIEN ET LE DEPANNAGE

mx4.book Page vii Wednesday, August 9, 2006 3:03 PM

Options available: VESA wall-mounting kit and Dome Surgery Review Cart.

See page 13 for more information.

AMLCD panel mounted on desk stand

Graphics display controller DC power adapter Power cords

Display driver and

Dome CXtra software Quick references

mx4.book Page viii Wednesday, August 9, 2006 3:03 PM

About the Display

The Dome E4c display is a 30-inch AMLCD color panel designed for

widescreen diagnostic imaging. The combination of high resolution

and high contrast ratio allow the viewing of color and grayscale

images simultaneously.

Bezel-free framing of 4 megapixels of data is presented in a landscape

resolution of 2560 x 1600 pixels. Gamma correction is achieved on

this true color display from a palette of 1786 near-gray values.

The integrated Dome RightLight controller monitors and stabilizes

backlight luminance.

Use of the Dome E4c display with the MX4 graphics display controller

offers these three advantages:

• Graphics board installation for PCI slot

• Dual-display configuration (two boards required)

• Image display in portrait mode

System requirements

• PCI slot (64-bit recommended)

• 50 MB hard disk space

•256MBRAM

•CD-ROMdrive

• Power supply, 350 watts or greater

• Windows XP Service Pack 1 or

Windows 2000 Service Pack 4

•.NETFramework1.1

mx4.book Page 1 Wednesday, August 9, 2006 3:03 PM

2 | Dome E4c Display

Display status

The Dome E4c display has a light-emitting diode, or LED, on the front

panel to indicate display status.

• Green. The display is connected and running properly.

• Amber. The video signal is not being received.

There is no power switch on the display unit. The unit turns on

automatically when the computer system is turned on. The LED

appears green to indicate functional system, or normal operation.

Improper cable connections could cause no image to appear on the

display screen or the LED to glow amber. See “Troubleshooting” on

page 14 for more information.

LED on display front

mx4.book Page 2 Wednesday, August 9, 2006 3:03 PM

Autres manuels pour Dome E4c

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Planar Moniteur

Planar

Planar PX2211MW Manuel utilisateur

Planar

Planar VitalScreen S VSS15X Manuel utilisateur

Planar

Planar PE2010 Manuel utilisateur

Planar

Planar SD2020 Manuel de la liste des pièces

Planar

Planar PT1510MX-WH Manuel utilisateur

Planar

Planar WS231 Manuel utilisateur

Planar

Planar PL2210W Manuel utilisateur

Planar

Planar QE Series Manuel utilisateur

Planar

Planar PX2491W Manuel utilisateur

Planar

Planar LT3200 Manuel utilisateur

Planar

Planar PX2611W Manuel utilisateur

Planar

Planar Bay Cat X SN-4620-1080 Manuel utilisateur

Planar

Planar PS5074K-N Manuel utilisateur

Planar

Planar LC1502R SERIES Manuel utilisateur

Planar

Planar PT1985P Manuel utilisateur

Planar

Planar PE150M Manuel utilisateur

Planar

Planar PLL2450MW Manuel utilisateur

Planar

Planar PT191MU Manuel utilisateur

Planar

Planar PT1545R Manuel utilisateur

Planar

Planar UltraRes URP98 Manuel utilisateur

Planar

Planar PLL1900W Manuel utilisateur

Planar

Planar WN-5040-720 Manuel utilisateur

Planar

Planar PLN2770W Manuel utilisateur

Planar

Planar PT170 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation