Planar PDP 42 Manuel utilisateur

oduct Man

ual

PDP 42"

Power Supply

Caution

Power Supply

- Warning

Power Supply

- Warning

·Safety precautions

Do not use damaged electric cord/

plug, or loose outlet.

·It can cause an electric shock or a fire.

Do not use multiple devices in an

outlet at the same time to avoid the

overload.

·It may cause a fire due to overheating

from the outlet.

Fully insert the plug into the outlet.

·Ifthe connection is unstable, it maycause

a fire.

AC plug should not be touched

with wet hands. It may cause an

electric shock.

·It can cause an electrical shock.

Be sure to ground the PDP power

source.

·It may cause an electric shock if it has a

failure or electrical leakage. Only use

the proper power cord supplied with

PDP and connect it to an outlet with a

ground terminal.

Be careful not to forcibly bend the

electric cords or press them with a

heavy object.

·It may cause an electric shock or a

fire.

When unplugging the AC cord, pull

out by holding the plug itself and

not by pulling on the cord.

·If the powercord is damaged. itmay cause

a fire.

This manual describes how to operate

the PDP properly and safely. Please

read this manual carefully.This manual

should be retained for future reference.

Installation

Caution

Installation

- Warning

Installation

- Warning

Do notinstall thePDPwhere

water (rain) drops can enter

the enclosure, or where

there is oil or humidity.

It may cause an electric

shock, a fire, failure or trans-

formation.

Do not use or keep it in a

place where combustible

sprays or inflammable

materialsare kept.

It may cause an explosion or

a fire.

Do not install in poorly

ventilated locations such

as bookcases or closets.

It may cause a fire due to

high temperature.

Do not place the electric

cord or the plug near an

electric heater.

The coating on the electric

cords and the plug may melt

and cause a fire or an electric

shock.

Install the antenna firmly

and away from high-volt-

age wires and communi-

cation cables.

If the antenna touches the

high-voltage wire, it may

cause an electric shock or a

fire.

Do not put candles, mos-

quito incense, cigarette

lighters, a heater, or any

other source of heat on or

near the PDP.

It may cause a fire.

The PDP should be installed a

small distance away from walls

or other solid objects in order

to maintain ventilation and to

prevent heat da

age.

Blockage of the ventilatior with

table covers or curtains can

cause a fire due to the

increased temperature inside

the monitor.

Be sure to install the monitor

on a level surface.

Warning : Serious injury or fatal injury may occur, if the indicated warning is not followed.

Caution : Minor injury or product damage may occur, if the indicated caution is not followed.

Do not place any liquid and

foreign objects on or above

the PDP.

·It may cause an electric shock

and a fire. Contact your dealer

for service.

Do not install the PDP in an

unstable location with a

smaller support area than

the PDP. It may fall and

cause injury.

It should be installed on a flat,

stablelocation.

Usage and Maintenance -

Caution

Usage and Maintenance -

Warning

·Safety precautions

Do not insert any foreign

objects such as wires and

drills into the PDP ventilation

slotsortheA/V terminal.

·It may cause an electric

shock or a fire.

Do not allow children to

play with the PDP.

·It may falls or flip over and

may cause serious injury.

Never attempt to disas-

semble, repair or modify

the PDP.

·It may cause an electric

shock or a fire. If it requires

repair, contact your dealer.

During a thunderstorm,

unplug the power cord

and never touch the

antenna cable.

·It can cause an electric

shock or a fire.

Unplug the PDP if you do

not intend to use it for a

long time. The generation

of heat, insulation degrada-

tion or the accumulation of

dust may cause an electric

fire.

When removing the batter-

ies in the remote control,

please place the batteries

in a location out of chil-

dren's reach . It must be

disposed properly.

The plugs and connectors

must be free of dust or

water before use. It may

cause an electric shock or

a fire.

When transporting the PDP,

at least two people should

carry it. If it is dropped, seri-

ous injury may occur.

To clean the interior of the

PDP,contactyour dealer for

service. A fire or failure may

occur, if it is not cleaned.

When moving the PDP, turn off

the power switch and unplug the

power cord from the outlet. Make

sure that the external connection

cords are unplugged (such as

antenna cable and input cables)

prior to moving.

The electrical cords may get

damaged and cause an electric

shock or a fire.

When cleaning the PDP,

unplug the electric cord

and wipe with a soft and

dry cloth. Never clean with

chemicals such as industri-

al glaze, wax, benzene,

alcohol, thinner, aromatic,

lubricant, detergent, or a

damp cloth.

If the PDP is emitting smoke

or an unusual sme

l, immedi-

ately turn off the power and

unplug thepower cord.

It may cause an electric shock

or a fire. Contact your dealer

fortheservice.

Considerations for Usage

Still image (immovable) screen may cause permanent damage to PDP.

Lengthy display of still images from video games, banners, graphics and others may fatally damage

the screen.

When using Picture-In-Picture, permanent damage may occur if the sub-image screen stays on the

corner of screen for a long time.

3. When using the PDP in 4:

3 formats with sidebars for a long period of time, it may cause damage to

the plasma panel. It is recommended that you use 16:9 or Panorama format. (Image burn-in can be

avoided by using "Panel Protection" function or a screen-saver. However, once image burn-in

occurs, it may not disappear completely. An image will be dimmed as the image is displayed long

time or repeatedly.)

※

Any damage to the PDP caused by improper usage (such as image burn-in) shall not be covered

by the warranty.

Defective pixels that can be seen on PDP screen. (illuminated spots, bright spots,

scotoma , blind spot, blinking)

Generally, PDP consists of about 1.22 million pixels and having defective pixels is possible. A PDP

with a number of defective pixels below a certain number is not considered defective. The limited

number of defective pixels does not affect the performance or reliability of the PDP. The standard of

inspection regarding defective pixels is the same or better as the competitor's offering on similar PDP.

It is not subject to replacement or a refund. We will do our best to minimize the defective pixel as best

as we can.

·Contents

Safety precautions

Power Supply

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯2

Installation

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯3

Usage and Maintenance

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯4

Considerations for Usage

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 5

Contents

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 6~7

User Guidance Information

Names of each part

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 8~9

Options

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 10

Accessories

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯11

Installing the PDP

Installing on a wall

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 12

Installing on a desktop

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 13

Remote controller

Functions of remote controller buttons

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 14

Inserting batteries into remote controller

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 15

Connection

Connecting to the VCR

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 16

Connecting to the Cable TV

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 17

Connecting to the Camcorder/ Video game console

⋯⋯⋯⋯⋯⋯ 18

Connecting to the DVD player

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 19

Connecting to the DTV receiver

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 20~21

Connecting to the PC

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 22~23

Basic Use

Powering the PDP

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 24

Selecting input source

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 25

Volume

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 26

Mute

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 26

Still

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 26

Info

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 26

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 27

Application

PSM (Picture Status Memory)

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 28

Adjusting the screen in USER mode

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 29

ARC (Aspect Ratio Control)

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 30

Watching PIP

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 31

PC mode

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 32~33

Color Tone (Pre-Set)

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 34

Color Tone (Manual adjustment)

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 35

SSM (Sound Status Memory)

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 36

Equalizer

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 37

Stereo

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 38

Reset

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 39

Language

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 40

Half Tone

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 41

Panel Protection

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 42

PBP Mode

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 43

Current Time setting

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 44

On Time/ Off Time (Time setting)

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 45

On Time Volume

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 46

Sleep Timer

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 47

Maintenance and Service Part

Trouble shooting

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 48~50

Supporting display mode

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 51

Specifications

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ 52

User Information

·Names of each part

Front View

Remote controller Receiving Sensor

Power Supply Indication Lamp

Standby : Red

n : Green

Input Selection Button

Main Power Button

Please turn off the main power switch, if the PDP will not be

used for a long period of time.

Volume ◀

▶ Button

Standby

Back View

RS-232C TerminalExternal Speaker Connection

Terminal (8Ω)

RGB PC Input Terminal

(VGA / SVGA / XGA) S-Video Terminal

Component (DVD / DTV)

Input Terminal

(480i/480p/720p/1080i)

AV input (composite)

Terminal

Audio Input Terminal

(S-Video, Component, DVI)

AC Input Terminal

·Options

Options

※

To improve the quality of the PDP, specification is subject to change without notice. Please

contact your dealer for current options available.

Adjustable - Angle

Wall mount

Ceiling - Mount

Bracket

Desktop Stand

Speaker

Audio Cable

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Planar Moniteur

Planar

Planar PT1503Z Manuel utilisateur

Planar

Planar SD2421W Manuel utilisateur

Planar

Planar PX2491W Manuel utilisateur

Planar

Planar PE171 Manuel utilisateur

Planar

Planar PLL2010W Manuel utilisateur

Planar

Planar LA1500R Manuel utilisateur

Planar

Planar Simplicity Series Manuel utilisateur

Planar

Planar Bay Cat X SN-4620-1080 Manuel utilisateur

Planar

Planar PT3270Q Manuel utilisateur

Planar

Planar PLL2010MW Manuel utilisateur

Planar

Planar DOME Md5/PCX Manuel utilisateur

Planar

Planar ICEBrite EL640.200-SK ALE Manuel utilisateur

Planar

Planar PXL2270MW Manuel utilisateur

Planar

Planar Clarity Matrix MX55HDU Manuel utilisateur

Planar

Planar Dome E2 Manuel utilisateur

Planar

Planar PXL2251MW Manuel utilisateur

Planar

Planar Dome E Series Manuel utilisateur

Planar

Planar LC12 Manuel du propriétaire

Planar

Planar WS231 Manuel utilisateur

Planar

Planar CM17.4SXAD Manuel utilisateur

Planar

Planar PL1700M-WH Manuel utilisateur

Planar

Planar PL1500M Manuel utilisateur

Planar

Planar LO552 Manuel utilisateur

Planar

Planar UltraRes X RS232 Series Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation