Pickering PXi 40-660A Manuel utilisateur

Page (1)

POWER MULTIPLEXER MODULE 40-660A / 665A

pickering

Issue 1.0 March 2019

User Manual

Power Multiplexer Module

(Model No. 40-660A/665A)

pickeringtest.com pickering

Page (II) POWER MULTIPLEXER MODULE 40-660A / 665A

pickering

Page (II) REED RELAY MODULE 40-110/115/120/125

pickering

No part of this publication may be reproduced, transmitted, transcribed, translated or stored in any form, or by

any means without the written permission of Pickering Interfaces.

Technical details contained within this publication are subject to change without notice.

ISO 9001

Reg No. FM38792

Page (III)

POWER MULTIPLEXER MODULE 40-660A / 665A

pickering

Page (III)

REED RELAY MODULE 40-110/115/120/125

pickering

TECHNICAL SUPPORT

For Technical Support please contact Pickering Interfaces either by phone, the website or via e-mail.

WARRANTY

All products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for a period of

three years, excluding programmable power supplies, from the date of delivery to the original purchaser. Any product found to be

defective within this period will, at the discretion of Pickering Interfaces be repaired or replaced.

Products serviced and repaired outside of the warranty period are warranted for ninety days.

Extended warranty and service are available. Please contact Pickering Interfaces by phone, the website or via e-mail.

ENVIRONMENTAL POLICY

Pickering Interfaces operates under an environmental management system similar to ISO 14001.

Pickering Interfaces strives to full all relevant environmental laws and regulations and reduce wastes and releases to the

environment. Pickering Interfaces aims to design and operate products in a way that protects the environment and the health and

safety of its employees, customers and the public. Pickering Interfaces endeavours to develop and manufacture products that can

be produced, distributed, used and recycled, or disposed of, in a safe and environmentally friendly manner.

Worldwide Technical Support and Product Information

pickeringtest.com

Germany

Tel: +49 89 125 953 160

E-mail: [email protected]

Sweden

Tel: +46 340-69 06 69

E-mail: [email protected]

USA

Tel: (West) +1 541 471 0700

Tel: (East) +1 781 897 1710

E-mail: [email protected]

Czech Republic

Tel: +420 558 987 613

E-mail: [email protected]

France

Tel +33 9 72 58 77 00

E-mail [email protected]

Pickering Interfaces Headquarters

Stephenson Road Clacton-on-Sea CO15 4NL United Kingdom

Tel: +44 (0)1255-687900

E-Mail: [email protected]

China

Tel: +86 4008 799 765

E-mail: [email protected]

Page (IV) POWER MULTIPLEXER MODULE 40-660A / 665A

pickering

Page (IV) REED RELAY MODULE 40-110/115/120/125

pickering

MEANING / DESCRIPTION SYMBOL

PROTECTIVE EARTH (GROUND)

To identify any terminal which is intended for connection to an external conductor for

protection against electric shock in case of a fault, or the terminal of a protective earth

(ground) electrode.

DANGEROUS VOLTAGE

To indicate hazards arising from dangerous voltages.

WARNING / CAUTION

An appropriate safety instruction should be followed or caution to a potential hazard

exists.

Refer to the relevant instructions detailed within the product manual.

HEAVY

If this product is heavy reference should be made to the safety instructions for

provisions of lifting and moving.

STATIC SENSITIVE

To indicate that static sensitive devices are present and handling precautions should

be followed.

SAFETY SYMBOLS

PRODUCT SAFETY

The following safety symbols may be used on the product and throughout the product documentation.

Page (V)

POWER MULTIPLEXER MODULE 40-660A / 665A

pickering

Technical Support and Warranty................................................III

Product Safety .............................................................................IV

Contents (this page)....................................................................V

Warnings and Cautions ..............................................................VII

Section 1

Technical Specication...............................................................1.1

Section 2

Technical Description .................................................................2.1

Functional Description..........................................................2.1

Maximum Frequency of Operations at Full Load ...............2.1

Section 3

Installation....................................................................................3.1

Pre Operation Checks...........................................................3.1

Hardware Installation ............................................................3.2

Software Installation .............................................................3.2

Testing Operation ..................................................................3.3

Section 4

Programming Guide....................................................................4.1

Programming Options For Pickering PXI Modules ............4.1

Module Architecture 40-660A/665A.....................................4.2

Sub-unit Cross Reference ....................................................4.3

Programming The Module 40-660A/665A...........................4.4

Section 5

Connector Information................................................................5.1

Section 6

Trouble Shooting.........................................................................6.1

Section 7

Maintenance Information............................................................7.1

Relay Lookup Table...............................................................7.1

Component Layouts..............................................................7.2

CONTENTS

Page (VI) POWER MULTIPLEXER MODULE 40-660A / 665A

pickering

THIS PAGE INTENTIONALLY BLANK

Page (VII)

POWER MULTIPLEXER MODULE 40-660A / 665A

pickering

Page (VII)

2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

WARNINGS AND CAUTIONS

WARNING - HAZARDOUS ENVIRONMENTS SYMBOL

This product is not specically designed for use in hazardous environments, for example in explosive

atmospheres. If the product is to be used in hazardous environments we recommend that the user

ensures suitable protective measures are taken.

WARNING - DANGER OF ELECTRIC SHOCK SYMBOL

This module may contain hazardous voltages. Before removing the module from the rack remove all

supplies and disconnect user I/O signals.

Unused slots in the host chassis are populated with blanking plates to prevent access to user I/O

signals that may be present. Blanking panels are available to order from Pickering in a variety of

slot widths. If the product is not used in this manner for example by using an extender card then

additional care must be taken to avoid contact with exposed signals.

Not to be used in safety critical circuits, refer to the Pickering Interfaces’ terms & conditions of sale.

This module must not be used for the switching of Mains Circuits. For the switching of voltages up

to the module’s full specication, Secondary Circuit power supplies and the Device Under Test must

be fully isolated from the Mains Circuit and the safety earth.

The host chassis must be correctly installed and be connected to mains or factory safety ground,

please refer to your chassis installation manual.

Diagram Showing Separation Between The Mains Circuit and Secondary Circuit / DUT

For the purposes of this document, a Mains Circuit is an installation classied as Overvoltage

Category II up to 300V. Separation between the Secondary Circuit and Mains Circuit is achieved

by a transformer in which the primary windings are separated from the secondary windings by

reinforced insulation, double insulation, or a screen connected to the protective conductor terminal.

CAUTION - HANDLING OF ELECTROSTATIC-SENSITIVE DEVICES SYMBOL

Certain semiconductor devices used in this equipment are liable to damage due to static voltage.

Observe the following precautions when handling these devices in their unterminated state, or

sub-assemblies containing these devices:

1. Persons removing sub-assemblies from equipment using these devices must be earthed by a

wrist strap and a resistor at the point provided on the equipment.

2. Soldering irons used during the repair operations must be low voltage types with earthed tips and

isolated from the mains voltage by a double insulated transformer.

3. Outer clothing worn must be unable to generate static charges.

4. Printed Circuit Boards (PCBs) tted with these devices must be stored and transported in

anti-static bags.

PXI Switching

Module

Device

Under Test

Power

Supply

Power

Supply

Host Chassis

Secondary Circuit

Mains

Circuit

Mains

Circuit

Mains/Factory

Safety Ground

Page (VIII) POWER MULTIPLEXER MODULE 40-660A / 665A

pickering

Page (VIII) 2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

CAUTION - PRODUCT DOCUMENTATION SYMBOL

Suitably qualied & trained users should ensure that the accompanying documentation is fully read

and understood before attempting to install or operate the product.

SAFETY INSTRUCTIONS

All cleaning and servicing requires the equipment to be isolated and disconnected from the power source and user I/O

signals (refer to the Maintenance Section).

• Appropriate manual handling procedures should be followed as dictated by the weight of the individual module or

the combined weight of the modules & chassis.

• Should a fault occur with the module or chassis, immediately isolate and disconnect the incoming power to the

chassis and the user I/O signals.

• Ensure the equipment is installed, operated and maintained by trained and authorised personnel.

• For suitably equipped products in the event of an emergency press the red “emergency stop” button situated on

the front of the unit.

Page 1.1

POWER MULTIPLEXER MODULE 40-660A / 665A

pickering SECTION 1 - TECHNICAL SPECIFICATION

SECTION 1 - TECHNICAL SPECIFICATION

pickeringtest.com

PXI Power Multiplexer 40-660A/665A

ISSUE 1.0 FEB 2019

• 10-Channel Power MUX, 1 or 2-Pole

• High Density 18-Channel Power MUX, 1-Pole

• 10A Current Rating (1-Pole Versions),

8A Current Rating (2-Pole Version)

• Hot Switch to 125VDC/250VAC, Cold Switch to

400VDC/250VAC

• VISA, IVI & Kernel Drivers Supplied for Windows

• Supported by PXI or LXI Chassis

• 3 Year Warranty

Pickering Interfaces have a range of power switching PXI modules,

available in relay, matrix or multiplexer congurations.

The 40-660A is a 10-channel power multiplexer, suitable for

switching inductive/capacitive loads up to 10A at 250VAC. It is

available in 1-pole (10A) or 2-pole (8A) versions.

The 40-665A is a higher density 18-channel power multiplexer with the

same specication as the 1-pole 40-660A.

The 40-660A/665A can be operated as conventional multiplexers

with break-before-make action when a new channel is selected.

Alternatively, product variants can be supplied that allow multiple

channels to be simultaneously selected.

The 40-660A/665A channel selection congurations have been

revised from the 40-660/665. The 40-660A/665A modules default

to single channel selection with multiple channel selection variants

dened by use of a sufx.

Com

Com2

Com1

1.1

2.1

5.2

6.1

6.2

10.2

2.2

5.1

3.1

3.2

4.1

4.2

7.1

7.2

8.1

8.2

9.1

9.2

10.1

1.2

Com

A10

A11

A18

A12

A13

A14

A15

A16

A17

10-Channel 1-Pole Power

Multiplexer 40-660A-001 10-Channel 2-Pole Power

Multiplexer 40-660A-002

18-Channel High Density Power

Multiplexer 40-665A-001

Power multiplexer modules can be used for switching heavy AC or

DC loads or for slave switching large external relays, contactors

and solenoids. Mating connectors are supplied with all versions.

Page 1.2 POWER MULTIPLEXER MODULE 40-660A / 665A

pickering

SECTION 1 - TECHNICAL SPECIFICATION

Power Multiplexer – 40-660A/665A

pickeringtest.com

Speciﬁcations

Switching Speciﬁcation

Contact Type: Gold ash over silver alloy

Cold Switching Capacity

Maximum Current:

Maximum Voltage:

10A (1-pole)

8A (2-pole)

400VDC/250VAC*

Hot Switching Capacity

Maximum Current:

Maximum Voltage:

Maximum Power: †

Min. Switching Capacity:

10A (1-pole)

8A (2-pole)

125VDC/250VAC*

300W/2500VA (1-pole)

240W/2000VA (2-pole)

10mA, 5VDC

Initial Path Resistance, On:

Path Resistance, Off:

<50mΩ

>109Ω

Bandwidth: >20MHz

Operate Time: 21ms typical,

10.5ms for multichannel mode

Expected Life - resistive load

Mechanical Life:

At Max. Switch Capacity:

>5x107operations

>1x105operations

* For full voltage rating, signal sources to be switched must be fully

isolated from mains supply and safety earth.

† For variation of maximum hot switching capacity of voltage with

current refer to plot.

Power Requirements

+3.3V +5V +12V -12V

0 360mA (typ 280mA) 0 0

Mechanical Characteristics

Single slot 3U PXI (CompactPCI card).

3D models for all versions in a variety of popular le formats are

available on request.

Connectors

PXI bus via 32-bit P1/J1 backplane connector.

Front panel signal connectors:

• 40-660A-001 - 20-pin male GMCT

• 40-660A-002 - 2 x 20-pin male GMCT

• 40-665A-001 - 20-pin male GMCT

For pin outs please refer to the operating manual.

Relay Type

The 40-660A/665A is tted with electro-mechanical power relays,

gold-ash over silver alloy. A spare relay is built onto the circuit

board to allow easy maintenance with minimum downtime.

AC Resisve

AC Inducve

DC Resisve

DC Inducve

30VDC / 250VAC Resisve

30VDC / 250VAC

Inducve

40-660A/665A Current/Operating Life Curve - 1-Pole

40-660A/665A Current/Voltage Curve - 1-Pole

AC Resisve

AC Inducve

DC Resisve

DC Inducve

30VDC / 250VAC Resisve

30VDC / 250VAC

Inducve

40-660A-002 Current/Operating Life Curve - 2-Pole

40-660A-002 Current/Voltage Curve - 2-Pole

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Pickering Multiplexeur

Pickering

Pickering PXI 40-617 Manuel utilisateur

Pickering

Pickering 40-655A Manuel utilisateur

Pickering

Pickering 40-640 Manuel utilisateur

Pickering

Pickering PXI Power MUX BRIC 40-571A Manuel utilisateur

Pickering

Pickering 40-650A Manuel utilisateur

Pickering

Pickering SYSTEM 10 Manuel utilisateur

Pickering

Pickering 40-760 Manuel utilisateur

Pickering

Pickering PXI 40-785B Manuel utilisateur

Pickering

Pickering 40-630A Manuel utilisateur

Pickering

Pickering 40-681A Manuel utilisateur

Pickering

Pickering SYSTEM 10 Manuel utilisateur

Pickering

Pickering 40-658 Manuel utilisateur

Pickering

Pickering 40-659A Manuel utilisateur

Pickering

Pickering PXI 40-660 Manuel utilisateur

Pickering

Pickering 40-614B Manuel utilisateur

Pickering

Pickering SIMRC 1050 Manuel utilisateur

Pickering

Pickering 40-675 Manuel utilisateur

Pickering

Pickering PXI 40-620 Manuel utilisateur

Pickering

Pickering 40-660A-001 Manuel utilisateur

Pickering

Pickering 40-756 Manuel utilisateur

Pickering

Pickering PXI 40-620A Manuel utilisateur

Pickering

Pickering 40-616 Manuel utilisateur

Pickering

Pickering 40-737 Manuel utilisateur

Pickering

Pickering 40-667B Manuel utilisateur

Manuels Multiplexeur populaires d'autres marques

Campbell

Campbell AM416 Manuel utilisateur

Paradyne

Paradyne SIM2000 Manuel utilisateur

Panasonic

Panasonic WJFS616 - SWITCHER Manuel utilisateur

Lanex

Lanex TM-77 Manuel utilisateur

Bosch

Bosch VSS8394/01T Manuel utilisateur

Quark-Elec

Quark-Elec QK-A035 Manuel utilisateur

ADTRAN

ADTRAN Frameport 768 Manuel utilisateur

Elo TouchSystems

Elo TouchSystems E247 Manuel utilisateur

Paradyne

Paradyne Hotwire 8786 Manuel utilisateur

RFL Electronics

RFL Electronics 9508D UCC Manuel utilisateur

Miranda

Miranda AMX-101i Mode d’emploi

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Manuel utilisateur

GE StoreSafe SDVR-10 Manuel utilisateur

American Fibertek

American Fibertek MTX-8410C Manuel utilisateur

ADC

ADC HiGain ELU-319 5E Manuel utilisateur

Paradyne

Paradyne Hotwire 8774 Manuel utilisateur

American Fibertek

American Fibertek MTX-8810C-SL Manuel utilisateur

Viessmann

Viessmann 5229 Manuel utilisateur