PhotoCentric CURE L Manuel utilisateur

PHOTOCENTRIC

CURE L

INSTALLATION

GUIDE

www.photocentricgroup.com

UK - Cambridge House, Oxney Road, Peterborough, PE1 5YW. +44 1733 349937

USA - 2205 West Parkside Lane, Phoenix, 85027, AZ. (623) 581-3220

CURE L

2Internal fan

5Timer indicator 9Heater

1On O switch

6Heater indicator 10 Door seal

13 Glass shelf

3Temperature unit 7Timer switch 11 Rear UV light

8Hanging bracket 12 Bottom UV light

4Temperature adjustment

PHOTOCENTRIC CURE L INSTALLATION GUIDE

1. Cure L at a glance

Figure 1: Cure L general layout

CURE L

1 2

CURE L CURE L

Figure 3: Cure L space requirements, plan view

3 4

613

660 660

620

MINIMUM DOOR

ANGLE FOR ACCESS

MAXIMUM

DOOR ANGLE

Figure 2: Cure L space requirements, front view

2. Suitable location

When choosing a suitable location for your Photocentric Cure L,

allow plenty of space (see Figure 2 and Figure 3). All diagrams

have dimensions in millimetres unless otherwise stated. Consider

the ergonomics of operating the cure unit.

50724

660

MINIMUM CLEARANCE

FOR VENTILATION

CURE L

NOTES

[email protected]

Cambridge House, Oxney Road, Peterborough, PE1 5YW

www.photocentricgroup.com

Contact for further enquiries

3. Unboxing & Placing Cure L

Remove the outer packaging and recycle it.

Photocentric Cure L weighs 64 kg. Carefully consider how it will

be lifted into position. Allow plenty of space to work and remove

any potential obstructions. Four people will be required to lift

Photocentric Cure L, one at each corner. Use safety gloves with

a secure grip surface to prevent slipping. Ensure everybody

involved is comfortable lifting the weight. Follow safe lifting

practice.

Keep the cure unit level and stable at all times. Always use

Photocentric Cure L in a well ventilated area.

4. Power requirements

• Photocentric Cure L requires a mains power supply

with a voltage of 100 VAC - 240 VAC and a frequency of

50 Hz - 60 Hz. It has a power consumption of 1000 W.

• It will draw a current of 4 A when connected to a 240

VAC supply, or 9 A when connected to a 100 VAC

supply.

• Only connect Photocentric Cure L to the mains socket

using the power cable supplied.

• Always plug the power cable into the mains socket and

the cure unit before switching on the power at the mains

socket.

• Similarly, always switch o the power at the mains

socket before unplugging the power cable from either

the cure unit or the mains socket.

• The cure unit power socket is on the back of the machine

on the right side. The power switch is on the front of the

machine, at the top left (Figure1-1).

CURE L CURE L

Table des matières

Autres manuels PhotoCentric Imprimante 3D

PhotoCentric

PhotoCentric LC MAGNA Manuel

PhotoCentric

PhotoCentric Liquid Crystal MAGNA Manuel utilisateur

PhotoCentric

PhotoCentric Liquid Crystal Pro Manuel utilisateur

PhotoCentric

PhotoCentric Liquid Crystal MAGNA Manuel utilisateur

PhotoCentric

PhotoCentric Liquid Crystal Opus Manuel utilisateur

PhotoCentric

PhotoCentric LC Precision Manuel utilisateur

PhotoCentric

PhotoCentric LC HR2 Manuel utilisateur

PhotoCentric

PhotoCentric WASH 99 Manuel utilisateur

PhotoCentric

PhotoCentric LC MAGNA Manuel utilisateur

PhotoCentric

PhotoCentric CURE L Manuel utilisateur

PhotoCentric

PhotoCentric AIR WASH L Manuel utilisateur

PhotoCentric

PhotoCentric Liquid Crystal Dental Manuel utilisateur

PhotoCentric

PhotoCentric LC HR Manuel utilisateur

PhotoCentric

PhotoCentric Liquid Crystal HR Manuel utilisateur

PhotoCentric

PhotoCentric LC Pro Manuel utilisateur

PhotoCentric

PhotoCentric CURE M Manuel utilisateur

PhotoCentric

PhotoCentric CURE M+ Manuel utilisateur

Manuels Imprimante 3D populaires d'autres marques

Ultimaker

Ultimaker S5 Material Station Manuel utilisateur

EcubMaker

EcubMaker TOYDIY Manuel utilisateur

AnyCubic

AnyCubic Kossel Plus Manuel utilisateur

ReDeTec

ReDeTec ProtoCycler Manuel utilisateur

Kywoo3D

Kywoo3D Tycoon IDEX Manuel utilisateur

CraftBot

CraftBot PLUS PRO Manuel utilisateur

3DGence

3DGence INDUSTRY F340 Manuel utilisateur

HP Jet Fusion 4200 Mode d'emploi

Rokit

Rokit AEP Series Manuel utilisateur

AnkerMake

AnkerMake M5 Manuel utilisateur

DIYElectronics

DIYElectronics PRUSA I3 Instructions de montage

Ackuretta

Ackuretta FreeShape 120 Manuel utilisateur

LONGER

LONGER LK5Pro Manuel utilisateur

Stratasys

Stratasys J850 Manuel utilisateur

MakerBot

MakerBot Replicator Manuel utilisateur

Stratasys

Stratasys FDM Vantage Series Manuel utilisateur

ZYYX

ZYYX Pro II Manuel utilisateur

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guide de l'utilisateur